ATen VM7604 Bruksanvisning


Läs gratis den bruksanvisning för ATen VM7604 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 12 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 6.5 recensioner. Har du en fråga om ATen VM7604 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
VM7604 / VM8604
4-Port DVI Input/Output Board Quick Start Guide
Hardware Review
VM7604 Front View
1. DVI Input Ports
2. Audio Input Ports
3. Status LED
VM8604 Front View
1. DVI Output Ports
2. Audio Output Ports
3. Status LED
Hardware Setup
I/O Board Installation
1. (Optional) Power off the Modular Matrix switch.
Note: The Input/Output Boards are hot swappable.
2. On the rear of the VM1600 unscrew the two phillips head screws and
remove a back panel
3. Slide the I/O board into the open slot on the VM1600 until it secures
in place.
Note: The upper four slots are for input boards; the lower four slots
are for output boards.
4. Tighten the screws on the I/O board to fasten it to the Modular Matrix
switch, until its secure.
5. Repeat the steps if you are installing more I/O boards.
6. Power on the Modular Matrix switch.
VM7604 Front View VM8604 Front View
1
23
1
23


Produktspecifikationer

Varumärke: ATen
Kategori: Inte kategoriserad
Modell: VM7604

Behöver du hjälp?

Om du behöver hjälp med ATen VM7604 ställ en fråga nedan och andra användare kommer att svara dig