Atlas Sound M2000-LP Bruksanvisning

Läs gratis den bruksanvisning för Atlas Sound M2000-LP (1 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 29 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 8 recensioner. Har du en fråga om Atlas Sound M2000-LP eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

1/1

AtlasSound.com

1601 Jack Mckay Blvd.

Ennis, Texas 75119 U.S.A.

Telephone: (800) 876-3333

Fax: (800) 765-3435

©2008 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound LP. All other

trademarks are the property of their respective owners. ATS003296 RevA 11/08

Installation and Set-Up for M2000-LP

Low-Profile Security Masking System

Step 1

Remove the M2000-LP from it’s package.

Step 2

Install the M2000-LP where desired.

The M2000-LP is designed to mount in either ceiling or floor plenums.

See Figure 1 for recommended installation in above ceiling plenum

spaces.

See Figure 2 for recommended installation in raised floor plenum

spaces.

Step 3

Terminate service loop to the amplifier output line.

(Black is negative, Red is positive)

Note: Strain relief is not designed to accommodate conduit.

Step 4

Set tap selector switch to desired power setting.

M2000-LP Wiring Block Diagram Technical Specifications

LoudspeakerTwo 2" x 4" Paper Cone Speakers

Transformer Taps.25, .5, 1, 2, & 4 Watts, plus an Off Setting

Height25⁄ " (67mm)8

Depth7" (178mm)

Width71⁄" (191mm)2

8Ω

Common

+

–

Red "+" Lead

Black "–" Lead

Transformer

6 Position Switch

Red .25 Watt 70.7V

White .5 Watt 70.7V

Yellow 1 Watt 70.7V

Blue 2 Watts 70.7V

Brown 4 Watts 70.7V

Black “–” Lead

Position 1 = “Off”

Position 2 = .25 Watt

Position 3 = .5 Watt

Position 4 = 1 Watt

Position 5 = 2 Watts

Position 6 = 4 Watts

Figure 1

Figure 2

Produktspecifikationer