Atlas Sound Z-SIGN Bruksanvisning

Atlas Sound mottagare Z-SIGN

Läs nedan 📖 manual på svenska för Atlas Sound Z-SIGN (10 sidor) i kategorin mottagare. Denna guide var användbar för 2 personer och betygsatt med 3.5 stjärnor i genomsnitt av 1.5 användare

Ladda ner PDF

Sida 1/10

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005891 RevF 6/19

AtlasIED.com

TELEPHONE: (800) 876-3333

SUPPORT@ATLASIED.COM

1601 JACK MCKAY BLVD.

ENNIS, TEXAS 75119 U.S.A.

Quick Start Guide

Z-SIGN

Overview

Thank you for purchasing the AtlasIED Z-SIGN - Wireless Privacy Transceiver. This quick start guide describes how to connect the Z-SIGN to a Z Series

High Definition Acoustical System. The Z-SIGN can be used in three different operations. The most common use for the Z-SIGN is to be used as a

wireless switch to activate the Speech Privacy Enhancement mode in a Z Series unit. This application also serves as visual indicator to show when

enhanced speech privacy is engaged. The Z-SIGN can also be used strictly as a visual indicator with the activation button being disabled. In this

application, it is common for the Z-SIGN to be used as a second or third visual indicator in a meeting room. Finally, the Z-SIGN can be used as a data

transmission / receiving conduit between a mobile device and a Z Series unit (see the example below). The Z-SIGN incorporates BLE

communication

technology for pairing to a mobile device for short distance data communication (not streaming audio), and uses 915MHz ISM Band to transmit longer

distances to a Z Series unit. The Z Series mobile App is needed for this function. Using the mobile App with a Z-SIGN allows for mobile control of the

Z Series unit and status of the Z system. For more information on the Z Series App, refer to the App User Guide.

Panels

1. Settings A Button

2. Settings B Button

3. Privacy Activation Button

4. Micro USB Charge Port or Direct Power and PC Firmware Upload

5. Removable Mounting Plate

6. Battery Tab

7. Battery Door and Screw

8. Firmware Label

9. Serial Number

10. Displayed Color Functions

Z Series App Z-SIGN Z2 or Z4 Base Unit

Bluetooth

BLE

Bluetooth

Streaming

UHF

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005891 RevF 6/19

AtlasIED.com

TELEPHONE: (800) 876-3333

SUPPORT@ATLASIED.COM

1601 JACK MCKAY BLVD.

ENNIS, TEXAS 75119 U.S.A.

Basic Set-up and Pairing for Installation

Note: This Guide assumes that the Z2 or Z4 unit has already been installed and is working. Before pairing, reset the Z-SIGN to Factory Default if it has

been previously paired to another Z Series System.

1. Remove the battery tab (#6) at upper left of battery door (#7) or if the batteries are not installed remove the battery door (#7). Open the battery

door (#7) and insert batteries. It is recommended to charge the batteries for 1 - 2 hours before use. See below for battery charging instructions. Pay

close attention to the battery polarities. Secure the door. Do not over tighten the screw.Caution:

2. Peel off the Z-SIGN protective covering.

3. Go to the Z Series menu tree. Navigate to “Pair Z Signs” and press ( ), then Enter.

4. While the menu says “Pairing……” (within 20 seconds), press and hold the Privacy Activation button (#3) on the Z-SIGN until you see “Pairing

Successful” in the menu tree display. The "Enhanced Privacy In Use" will flash green while holding the Activation button (#3), indicating it is

establishing the connection.

5. The screen will revert to the “Paired Z Signs” screen and will indicate that 1 Z-SIGN is paired to the Z Series unit. The Z-SIGN will remain Note:

paired to the Z Series unit it was originally set up with until a Reset to Factory Default action is initiated. (See A & B Option Key Settings)

6. Repeat these steps to pair up to 10 Z-SIGNs to 1 Z Series unit.

7. It is very important to start with fully charged batteries before using the Z-SIGN. Refer to the "Recharging Batteries" section.

Testing the Enhanced Speech Privacy Function

1. Press the Privacy Activation button (#3) and the “Enhanced Privacy In Use” will illuminate green. The Speaker Wave icon will go into a slow pulse

“Heart-Beat” indicating it is now paired and Enhanced Privacy is activated.

2. When activated, the Z Series home menu screen will change from “Status = Active” to blinking “Status = Enhanced Privacy”.

3. Press the Privacy Activation button (#3) again and the Enhanced Privacy function will stop.

4. The Z-SIGN is now ready to be mounted in the desired location. Be aware of the range between the Z-SIGN and Z Series unit. It is important Note:

to read the “Installation Out of Range Indication” section.

Pair Z Signs

1 Paired-Pair Signs>

*To Pair Sign

Press Enter

Pairing. . . . . Pairing Successful

Pair Z Signs

4 Paired-Pair Signs>

Model Z4 - ID 7968

Status=Enhanced Privacy

Z-SIGN Z2 or Z4 Base Unit

UHF

100'

All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005891 RevF 6/19

AtlasIED.com

TELEPHONE: (800) 876-3333

SUPPORT@ATLASIED.COM

1601 JACK MCKAY BLVD.

ENNIS, TEXAS 75119 U.S.A.

Installation Out of Range Indication

1. The connection range of the Z-SIGN to the Z Series unit is approximately 100' through a few typical office walls and doors. This varies based on

construction material types such as concrete and steel.

2. After pairing, move the Z-SIGN to the desired mounting location and test the Privacy Activation button (#3). The “Enhanced Privacy in Use” will

illuminate green while the Z-SIGN attempts to connect to the Z Series unit. When successfully paired, the Speaker Wave icon will start the

“Heart-Beat” pulse indicating the Z-SIGN is within an acceptable range to the Z Series unit. If not, it will time-out and blink blue, indicating it is out

of range. Moving closer to the Z Series unit will stop the light from blinking blue. Press the Privacy Activation button (#3) to re-establish the link.

3. Note: Small dead spots are possible in some environments and can cause confusing responses from the Z-SIGN. If this happens, move to another

spot until you find a consistently good functional range.

4. If the Z Series unit loses pairing link, the Z-SIGN will blink blue and time out after 30 minutes. When pairing link is restored, the Z-SIGN will

automatically pair with the Z Series unit and the blue blinking will stop.

Using the Z-SIGN for Activating Speech Privacy Enhancement

1. To Start the Enhanced Privacy feature, press the Privacy Activation button (#3) for 1 second. The “Enhanced Privacy in Use” will illuminate, and

the Speaker Wave icon will begin a slow pulse “Heart-Beat” indicating that the Z Series unit is in Enhanced Privacy mode. When activated, the

Z Series unit home menu screen will change from “Status = Active” to blinking “Status = Enhanced Privacy”.

2. When activated, the Z-SIGN continues the slow pulse until the Privacy Activation button (#3) is pressed again for 1 second to deactivate the

function.

If the Activation button is not pressed to stop it, after 1 hour the "Enhanced Privacy In Use" will begin blinking. After 5 minutes it will stop

automatically to save battery life. If the Activation button is pressed while "Enhanced Privacy in Use" is blinking, the timer will start over and continue

for another hour.

3. It is also possible to start / stop the Enhanced Privacy feature from any other Z-SIGN or App that has been paired to the same Z Series unit by

configuring the Z-SIGNs' operating modes.

Flashes blue when out of range

Move Z-SIGN closer to the Z Series unit

until the blue light stops flashing

Press the privacy activation button

to re-establish the link

"Heart-beat" pulse flashes green

when in range and activated