Atlona AT-OME-EX-KIT Bruksanvisning
Atlona
Wifi-repeater
AT-OME-EX-KIT
Läs gratis den bruksanvisning för Atlona AT-OME-EX-KIT (12 sidor) i kategorin Wifi-repeater. Guiden har ansetts hjälpsam av 16 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 8.5 recensioner. Har du en fråga om Atlona AT-OME-EX-KIT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
1
Installation Guide
AT-OME-EX-KIT
Omega™ 4K/UHD
HDMI Over HDBaseT TX/RX with USB, Control, and PoE
AT-OME-EX-KIT
The Atlona AT-OME-EX-KIT is an HDBaseT extender for video up to 4K/60 4:2:0, plus
embedded audio, control, Ethernet, and USB 2.0 over distances up to 330 feet (100 meters).
Part of the Omega™ Series of integration products for modern AV communications and
collaboration, the OME-EX-KIT is HDCP 2.2 compliant and extends IR, RS-232, and IP control
signals. The integrated USB extension is ideal for software video conferencing and the use of
touch or interactive displays. The OME-EX-TX transmitter includes a USB host port for a PC,
plus two peripheral devices such as a speakerphone, microphone, or keyboard and mouse. The
OME-EX-RX receiver provides two USB 2.0 interfaces for devices such as a camera or display.
The transmitter and receiver are available separately, for use with other Omega Series integration
products.*
* Both the AT-OME-EX-TX and AT-OME-EX-RX are not compatible with the AT-UHD-HDVS-300
system for extending USB.
IMPORTANT: Visit http://www.atlona.com/product/AT-OME-EX-KIT for the
latest rmware updates and User Manual.
1 x AT-OME-EX-TX
1 x AT-OME-EX-RX
2 x Captive screw connectors, 4-pin
1 x AT-IR-CS-TX
4 x Mounting plates
8 x Mounting screws
1 x 48 V DC power supply
1 x Installation Guide
Package Contents
2
Installation Guide
AT-OME-EX-KIT
1 LAN
Connect a category cable from this port to a network switch. This cable provide IP pass-
through transport control from a control system to the display (sink) device connected to the
AT-OME-EX-RX.
2 DEVICE
Connect up to two USB devices (e.g. mouse, keyboard, etc.) to these ports. These ports
provide 2.5 W per USB device interface.
3 HOST
Connect a USB cable from this port to the host computer.
4 FW
Connect a mini USB-to-USB cable from this port, to a computer, to update the rmware.
Refer to for more information.Updating the Firmware (page 11)
5 PWR / LINK
The LED indicator will glow green when the AT-OME-EX-TX is powered. The AT-OME-PWR
EX-RX supplies power to the AT-OME-EX-TX over HDBaseT. The LED indicator glows LINK
yellow when a solid link is established between the AT-OME-EX-TX and AT-OME-EX-RX.
Refer to for more information.LED Indicators (page 6)
6 RS-232 / IR
Connect the included 4-pin captive screw block to this receptacle. Refer to RS-232 and IR
(page 4) for more information.
7 HDBaseT OUT
Connect a category cable from this port to the port of the AT-OME-EX-RX or HDBaseT IN
other PoE-compatible receiver.
8 HDMI IN
Connect an HDMI cable from this port to the source device.
Front
Rear
HDMI IN
AT-OME-EX-TX
HDBaseT OUT
RX RXTX
RS-232 IR
8
6 7
LAN FWHOST
OMEGATM
DEVICE
PWR
LINK
2
1 3 4 5
AT-OME-EX-TX
3
Installation Guide
AT-OME-EX-KIT
1 LAN
Connect a category cable from this port to the display (sink) device. This cable provides IP
pass-through transport control to the display (sink) device, from a control system connected
to the AT-OME-EX-TX.
2 DEVICE
Connect up to two USB 2.0 devices (e.g. mouse, keyboard, etc.) to these ports.
These ports provide 2.5 W per USB device.
3 FW
Connect a mini USB-to-USB cable from this port, to a computer, to update the rmware.
Refer to for more information.Updating the Firmware (page 11)
4 PWR / LINK
The LED indicator will glow green when the AT-OME-EX-RX is powered. The PWR LINK
LED indicator glows yellow when a solid link is established between the AT-OME-EX-TX and
AT-OME-EX-RX. Refer to for more information.LED Indicators (page 6)
5 DC 48V
Connect the included 48 V DC power supply to this power receptacle.
6 RS-232 / IR
Connect the included 4-pin captive screw block to this receptacle. Refer to RS-232 and IR
(page 4) for more information.
7 HDBaseT IN
Connect a category cable from this port to the port of the AT-OME-EX-TX. HDBaseT OUT
The AT-OME-EX-TX is powered by the AT-OME-EX-RX over HDBaseT.
8 HDMI OUT
Connect an HDMI cable from this port to the display (sink) device.
AT-OME-EX-RX
LAN FW
OMEGAT M
DEVICE
PWR
LINK
HDMI OUTHDBaseT IN
RX TXTX
RS-232 IRDC 48V
AT-OME-EX-RX
Front
Rear
8
65 7
2
1 3 4
Produktspecifikationer
| Varumärke: | Atlona |
| Kategori: | Wifi-repeater |
| Modell: | AT-OME-EX-KIT |
Behöver du hjälp?
Om du behöver hjälp med Atlona AT-OME-EX-KIT ställ en fråga nedan och andra användare kommer att svara dig
Wifi-repeater Atlona Manualer
10 September 2024
10 September 2024
10 September 2024
10 September 2024
10 September 2024
Wifi-repeater Manualer
- Seco-Larm
- Silvercrest
- Heatit
- Techly
- Tripp Lite
- NGS
- Icron
- Audio Pro
- Marmitek
- NetComm
- ZyXEL
- Totolink
- SmartAVI
- Arris
- Moxa
Nyaste Wifi-repeater Manualer
12 Juni 2025
11 Juni 2025
7 Juni 2025
1 Juni 2025
30 Mars 2025
30 Mars 2025
24 Mars 2025
3 Mars 2025
21 Februari 2025
20 Februari 2025