Atlona AT-VCC-RS232-KIT Bruksanvisning

Atlona Inte kategoriserad AT-VCC-RS232-KIT

Läs gratis den bruksanvisning för Atlona AT-VCC-RS232-KIT (12 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 24 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 12.5 recensioner. Har du en fråga om Atlona AT-VCC-RS232-KIT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/12
Installation Guide
AT-VCC-RS232-KIT
1
IP to RS-232 Command Converter for Velocity Control
System
AT-VCC-RS232-KIT
The Atlona AT-VCC-RS232-KIT is an accessory for the Atlona Velocity™ Control System that
provides conversion between IP and RS-232 control commands. This Velocity Control Converter
is very compact and can be placed anywhere a device requires control and is not IP-capable.
The VCC-RS232-KIT is remotely powered through Power over Ethernet (PoE), or locally from a
USB power source. The primary unit installs onto any surface via a convenient mounting dock. A
simple “click” locks it into place for a secure, reliable installation. An RS-232 gender changer is
included.
1 x AT-VCC
1 x AT-VCC-RS232
Package Contents
Operating Notes
The AT-VCC-RS232-KIT is PoE, to power the unit, simply plug it into a PoE compatible
network switch. If the network switch is not PoE capable, a PoE injector (purchased separately)
or USB can be used.
All devices (AT-VCC, Velocity, AT-VTP, switchers, etc) should be set to static IPs or the
DHCP IP address reserved for each individual device.
IMPORTANT: Velocity Gateway (AT-VGW-HW) must be set up before the AT-VCC-RS232-
KIT is fully functional.


Produktspecifikationer

Varumärke: Atlona
Kategori: Inte kategoriserad
Modell: AT-VCC-RS232-KIT
Vikt: 40 g
Bredd: 15.24 mm
Djup: 32.51 mm
Höjd: 55.88 mm
Värdgränssnitt: RJ-45
Produktens färg: Svart
Intern: Nej
Utgränssnittet: RS-232

Behöver du hjälp?

Om du behöver hjälp med Atlona AT-VCC-RS232-KIT ställ en fråga nedan och andra användare kommer att svara dig