Audac CENA812 Bruksanvisning

Audac högtalare CENA812

Läs gratis den bruksanvisning för Audac CENA812 (2 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 11.5 recensioner. Har du en fråga om Audac CENA812 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
INSTALLATION MANUAL
CENA SERIES SPRING-FIT™ CEILING SPEAKERS
STEP 1 STEP 2
Cut a hole on the desired mounting location in the
ceiling. Make sure the dimension is matching the
cut-out measurement for the installing loudspeaker
CENA306 = Ø 80 mm
CENA506 = Ø 150 mm
Double check if there are no cables or other
obstructions behind the mounting surface before
making the cut-out.
Connect the wires coming from the amplier to the
SnapConnect™ on the rear of the loudspeaker.
The correct power tapping is chosen by connecting the
appropriate terminals of the connector. A description
of the power tap selection is shown on the magnet
sticker on the rear side of the loudspeaker.
CENA306/506/706:
Red: 6 Watt / 1667 Ω
White: 3 Watt / 3333 Ω
Black: COM
CENA812:
Red: 12 Watt / 833 Ω
White: 6 Watt / 1667 Ω
Black: COM
Ø Diameter
STEP 3
Bend the spring loaded mounting arms inwards by
pushing them by ngers, making them t through the
provided ceiling cut-out.
STEP 4
Insert the speaker through the provided ceiling cut-
out, make sure the spring loaded mounting arms are
behind the clamping surface and release them. The
ceiling is clamped between the mounting arms and
the speaker bae and is installed correctly.
The speaker is now ready for use.


Produktspecifikationer

Varumärke: Audac
Kategori: högtalare
Modell: CENA812

Behöver du hjälp?

Om du behöver hjälp med Audac CENA812 ställ en fråga nedan och andra användare kommer att svara dig