Audac WMM450 Bruksanvisning

Audac högtalare WMM450

Läs gratis den bruksanvisning för Audac WMM450 (2 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 11 recensioner. Har du en fråga om Audac WMM450 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
INSTALLATION MANUAL
WMM450 METAL IN-CEILING/WALL SPEAKER BACK-BOX
STEP 1 STEP 2
Install the back box onto the supporting beams in the
wall or ceiling. The back box can be installed in both
horizontal or vertical direction. Use the provided slots
for mounting the back box to the supporting beams.
Depending on the structural material the appropriate
fasteners shall be used.
Assemble the cable gland through one of the provided
knock-out holes in the back box, and provide the cable
through it. Loop the cable through the bracket on
top of the back-box, to avoid stress on the cable and
contacts. Make sure the cable gland is well tightened
to avoid any air-leakage through it.
STEP 3
Finish the structure by placing finishing board
(plasterboard, wood, ... ) in front of it. Make the cut-out
for the installed speaker according to the required
dimensions. Afterwards, connect, insert and install
the speaker into the provided opening.
DIMENSIONS
406 mm (16”)406 mm (16”)406 mm (16”)
17
1
/
2
“ (446 mm)
17
1
/
8
“ (435 mm)
14
1
/
8
“ (359 mm)
5”
(127 mm)
17
7
/
8
(455 mm)


Produktspecifikationer

Varumärke: Audac
Kategori: högtalare
Modell: WMM450

Behöver du hjälp?

Om du behöver hjälp med Audac WMM450 ställ en fråga nedan och andra användare kommer att svara dig