Audio-Technica AE2500 Bruksanvisning
Audio-Technica
mikrofon
AE2500
Läs gratis den bruksanvisning för Audio-Technica AE2500 (2 sidor) i kategorin mikrofon. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 10 recensioner. Har du en fråga om Audio-Technica AE2500 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
User Manual
Dual-element Cardioid Instrument Microphone AE2500
■Features
■Notes on use
■
Connection procedure
■Specifications
Condenser, dynamic
Cardioid
20 - 17,000 Hz (condenser)
30 - 10,000 Hz (dynamic)
80 Hz, 12 dB/octave (condenser)
-51 dB (2.8 mV) re 1V at 1 Pa (condenser)
-54 dB (1.9 mV) re 1V at 1 Pa (dynamic)
100 ohms (condenser)
600 ohms (dynamic)
148 dB SPL, 1 kHz at 1% T.H.D. (condenser)
158 dB SPL, with 10 dB pad (normal)
124 dB, 1 kHz at Max SPL (condenser)
70 dB, 1 kHz at 1 Pa (condenser)
11-52 V DC, 3 mA typical (condenser)
Flat, roll-off ; 10 dB pad (normal) (condenser only)
390 g
5m dual shielded, 8-conductor cable,
5-pin XLRF-type connector at microphone,
two 3-pin XLRM-type output connectors
• 1 Pascal = 10 dynes/cm
2
= 10 microbars = 94 dB SPL
* Typical, A-weighted, using Audio Precision System One.
Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
©2017 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com
08-DEC--2020 Form No.ATGC-L0387-20
Thank you for purchasing this product. Before using the product, read through the user manual to
ensure that you will use the product correctly.
Please keep this manual for future reference.
The AE2500 is intended for use in professional applications where remote power is available. It
requires 11V to 52V DC phantom power only to the condenser output of the supplied cable.
Output from the microphone's 5-pin XLRM-type connector is lowimpedance (Lo-Z) balanced. The
included 5m shielded cable features a 5-pin XLRF-type input connector and two standard 3-pin
XLRM-type output connectors. The balanced signals appear across Pins 2 and 3 (condenser) and
Pins 4 and 5 (dynamic). Pin 1 is ground (shield). Output is phased so that positive acoustic pressure
produces positive voltage at Pins 2 and 4.
An integral 80 Hz hi-pass filter provides easy switching from a flat frequency response to a low-end
roll-off. The roll-off position reduces the microphone’s sensitivity to popping in close vocal use. It also
reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room
reverberation and mechanically-coupled vibrations.
The AE2500 includes an AT8471 isolation clamp to provide secure mounting, versatile positioning,
and effective dampening of unwanted mechanical noise.
Avoid leaving the microphone in the open sun or in areas where temperatures exceed 43°C for
extended periods. Extremely high humidity should also be avoided.
Connect the output terminals of the microphone to the 5-pin XLRF-type connector on the
included cable. Connect the two 3-pin XLRM-type output connectors on the opposite end of
the cable to devices that have a microphone input (balanced input) compatible with a
phantom power supply.
The output connectors are XLRM-types with polarities as show in the figures below.
For product improvement, the product is sublect to modification without notice.
• Revolutionary dual-element design features two elements (condenser and dynamic) enclosed in a
single-housing
• Dynamic element delivers the aggressive attack of the beater while the condenser captures the
round tonalities of the shell
• Elements are positioned in a perfect phase relationship, something practically unachievable with
two separate microphones
• Robust design for enduring dependability on the road
• Integral 80 Hz HPF switch and 10 dB pad (condenser element)
■Safety precaution
■Cautions for the product
Although this product was designed to be used safely, failing to use it correctly may result in an
accident. To ensure safety, observe all warnings and cautions while using the product.
• Do not subject the product to strong impact to avoid malfunction.
• Do not disassemble, modify or attempt to repair the product.
• Do not handle the product with wet hands to avoid electric shock or injury.
• Do not store the product under direct sunlight, near heating devices or in a hot, humid or dusty
place.
Element
Polar pattern
Frequency response
Low Frequency response
Open circuit sensitivity
Impedance
Maximum input sound level
Dynamic range (typical)
Signal-to-noise ratio
Phantom power requirements
Switch
Weight
Cable
165.0 mm long, 55.0 mm maximun diameter
Integral 5-pin XLRM-type
Dimensions
Output connector
Included accessories AT8471 isolation clamp for 5/8"-27 threaded stands;
5/8"-27 to 3/8"-16 threaded adapter;
soft protective pouch
1 2
3
Microphone output terminals
PIN1
(ground)
PIN5
(Dynamic cold)
PIN4
(Dynamic hot)
PIN2
(Condenser hot)
PIN3 (Condenser cold) PIN3 (cold)
PIN1
(ground)
PIN2
( )hot
Cable output terminals
①
②
③
①
②
③
①
XLR-F5P
②
③
④
⑤
G
( )＋
( )－
G
( )＋
( )－
XLR-M3P×2
Cable connection diagram
Condenser element
Dynamic element
This product requires
48V DC phantom power
for Condenser element.
■ ■Condenser polar attern p Condenser fr r o e: 20~17,000Hzequency esp ns
180°
150°
120°
30°
0°
330°
300°
270°
240°
210°
LEGEND
0°, 50cm
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
Roll-off
60°
90°
10 dB
Response in dB
Frequency in Hertz
10
0
-10
-20
-30
20
■ ■Dynamic polar attern p Dynamic Fr r o e: 30~10,000Hzequency esp ns
180°
150°
120°
30°
0°
330°
300°
270°
240°
210°
LEGEND
0°, 50cm
SCALE IS 5 DECIBELS PER DIVISION
LEGEND
200 Hz
1 kHz
5 kHz
8 kHz
60°
90°
10 dB
Response in dB
Frequency in Hertz
10
0
-10
-20
-30
20
100
50
200
10k
5k
1k
500
2k
20k
100
50
200
10k
5k
1k
500
2k
20k
Produktspecifikationer
| Varumärke: | Audio-Technica |
| Kategori: | mikrofon |
| Modell: | AE2500 |
Behöver du hjälp?
Om du behöver hjälp med Audio-Technica AE2500 ställ en fråga nedan och andra användare kommer att svara dig
mikrofon Audio-Technica Manualer
19 Oktober 2025
19 Oktober 2025
1 Mars 2025
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
7 December 2024
mikrofon Manualer
- Bontempi
- Konig & Meyer
- Pryme
- MOZA
- GVM
- Sharkoon
- Radial Engineering
- Glemm
- NPTCL
- Phonak
- Rollei
- Gembird
- Royer Labs
- ITek
- Voice Technologies
Nyaste mikrofon Manualer
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
16 Oktober 2025
15 Oktober 2025
13 Oktober 2025
13 Oktober 2025
13 Oktober 2025