Audio-Technica AT8688S Bruksanvisning
Sidor 2 Engels Inte kategoriserad
Läs bruksanvisningen för Audio-Technica AT8688S gratis online eller ladda ner PDF:en. 35 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
ANTI-SHOCK MICROPHONE STAND
- Heavy die-cast construction and non-slip bottom pads minimize
coupling of surface vibration to the unit.
-Low-proledesignwithlow-reectanceblacknishforminimum
visibility.
-Theimprovedtightermicrophonesocketforreducetheswingof
the microphone.
There are two models for application - AT8688 / AT8688S. Combin-
ing technical and artistic features in the design, the microphone
standsnd theirvariousapplicationsinthe eld ofbroadcast and
communications.
Thetwomodels come with a low reflectance, matte-black finish.
The AT8688 features a 3-pin XLRF type receptacle on the input port
and 3-pin XLRM type receptacle on the output port. Both recepta-
clesaregold-platednish.TheAT8688Salsofeaturesaphantom-
powered mute switch with a LED indicator that meets stringent
audio transmission requirements and adapts to various types of
microphone.
MOUNTING / CONNECTIONS:
1. Insert a microphone into microphone stand while pressing the top
connector.
2. Connect XLRF-3 side of the cable to the stand and the other side
to your equipment.
3. To remove the microphone, pull out the microphone while
pressing the release tab of the XLRF circular connector of the
microphone stand.
Note thatthemicrophonestandcouldbreakandcauseaninjuryif
it is dropped.
FORM No. ATGC-L0181-11-E
Machida•Tokyo•Japan
MECHANICAL SPECIFICATIONS
MIC ATTACHMENTXLRF-type,
XLRM-type
XLRF-type,
XLRM-type,
Switch with LED
DIMENSIONS
WIDTH
DEPTH
HEIGHT
91 mm
132 mm
38 mm
91 mm
132 mm
38 mm
WEIGHT800 g840 g
DESCRIPTION
TheseAudio-Technicaanti-shockmicrophonestandseffectively
isolate mounted microphones from impact vibration and
mechanical noise normally transmitted from the surface.
They are intended for use with microphones stood on lecterns,
pulpits, conference tables and similar surfaces. Ideal for use
withgooseneckmicrophonesandotherquick-mounttype
microphones using industrial standard XLRM 3-pin type
connectors.
AT8688S OFF SWITCH
The AT8688S features a newly design press-on/press-off switch
circuit that controls the microphone, the mute attenuation level up to
64dB. The circuitry also operates a light in the switch, powered by
the 24-52V phantom source, to indicate when the mic is “on”.
AT8688S ELECTRICAL SPECIFICATIONS
PHANTOM POWER REQUIREMENTS24~52V DC, 2 mA typical
INSERTION LOSS*1.2 dB
OFF ATTENUATION*64 dB minimum
*150ohmsource,100kohmload
Produktspecifikationer
| Varumärke: | Audio-Technica |
| Kategori: | Inte kategoriserad |
| Modell: | AT8688S |
Behöver du hjälp?
Om du behöver hjälp med Audio-Technica AT8688S ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Audio-Technica Manualer
Audio-Technica BPW-330 Bruksanvisning Audio-Technica ATW-A49 Bruksanvisning Audio-Technica ATW-901A/L Bruksanvisning Audio-Technica ATW-3212N Bruksanvisning Audio-Technica ATUC-IRCU Bruksanvisning Audio-Technica ATW-2000b Bruksanvisning Audio-Technica ATW-1311/L Bruksanvisning Audio-Technica ATUC-50CU Bruksanvisning
Populära i Inte kategoriserad
Audio-Technica BPW-120 Bruksanvisning Audio-Technica ATW-BH1 Bruksanvisning Audio-Technica BPF-175 Bruksanvisning