Audio-Technica ES925ML/XLR Bruksanvisning
Sidor 3 Engels mikrofon
Läs bruksanvisningen för Audio-Technica ES925ML/XLR gratis online eller ladda ner PDF:en. 29 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga
1
ES925ML6/XLR
ES925ML12/XLR
ES925ML15/XLR
ES925ML18/XLR
ES925ML21/XLR
ES925ML24/XLR
User Manual
MICROLINE CONDENSER
MODULAR GOOSENECK MICROPHONE
WITH XLR POWER MODULE
■Introduction
Thank you for purchasing this product. Before using the product, read through
the user manual to ensure that you will use the product correctly. Please keep
this manual for future reference.
■Features
• Modular microphone system comprised of an ES Series capsule, gooseneck
assembly, and power module.
• RGB LED built into the gooseneck assembly can be linked seamlessly with
ATUC Series products and the desk stand (AT8699R).
• Insert the power module into a standard XLRF-type connector, or use the
included quick mount stand adapter (AT8473) to attach it to a microphone
stand.
• Cover a wide sound acquisition range from 90° to 360° by replacing the
capsule.
■Safety precautions
Although this product was designed to be used safely, failing to use it correctly
may result in an accident. To ensure safety, observe all warnings and cautions
while using the product.
■Cautions for the product
• Do not subject the product to strong impact to avoid malfunction.
• Do not disassemble, modify or attempt to repair the product.
• Do not handle the product with wet hands to avoid electric shock or injury.
• Do not store the product under direct sunlight, near heating devices or in a
hot, humid or dusty place.
■Notes on use
• Do not swing or pull the product. Doing so may cause disconnection or
damage.
• The circuitry in the microphone takes about 30 seconds to stabilize after power
is supplied. You may hear some audio disturbance during startup.
• Check that the carry case ground is grounded with the mic cable latch firmly
engaged before use.
• Do not excessively bend the gooseneck assembly, rotate the ends of the
capsule, or pull on them. Doing so may cause disconnection or malfunction.
• The product is a modular system comprised of a microphone element,
gooseneck assembly and power module. Make sure the parts are firmly
attached before use.
• Do not remove the rubber O-ring on the power module connecting part at the
lower section of the gooseneck assembly and the lower part of the XLR power
module.
• When attaching parts, remove the black cap on the capsule connecting part
of the gooseneck assembly. Do not remove the silicone part at the end of
the capsule connecting part.
Silicone part
Do not remove
Produktspecifikationer
| Varumärke: | Audio-Technica |
| Kategori: | mikrofon |
| Modell: | ES925ML/XLR |
Behöver du hjälp?
Om du behöver hjälp med Audio-Technica ES925ML/XLR ställ en fråga nedan och andra användare kommer att svara dig
mikrofon Audio-Technica Manualer
Audio-Technica ES945O/TB3 Bruksanvisning Audio-Technica ES925H/DS5 Bruksanvisning Audio-Technica ATR1500x Bruksanvisning Audio-Technica MTH410 Bruksanvisning Audio-Technica ATM350U Bruksanvisning Audio-Technica ATR4650-USB Bruksanvisning Audio-Technica ATR6550x Bruksanvisning Audio-Technica ATND971a Bruksanvisning
Alla Audio-Technica mikrofon manualer
Populära i mikrofon
Audio-Technica AT808G Bruksanvisning Audio-Technica AT875R Bruksanvisning Audio-Technica XM1S Bruksanvisning