Audix A10 Bruksanvisning


Sidor 1 Engels Öronpropp

Läs bruksanvisningen för Audix A10 gratis online eller ladda ner PDF:en. 40 personer har tyckt att guiden var hjälpsam. Fråga om modellen? Ställ en fråga

© 2021 Audix Corporation. Audix is a registered trademark of the Audix corporation.
Specifications subject to change without notice.
For service and warranty information, visit audixusa.com
A10 Spec Sheet v1.1
A10
STUDIO-QUALITY EARPHONES
OVERVIEW
The A10 Earphones are engineered to deliver studio-quality performance
for live sound monitoring and critical listening with exceptional imaging and
isolation. The A10 features a dynamic low-mass moving coil assembly and
titanium alloy diaphragm delivering ten octaves of frequency response with
accurate phase coherence. The balanced sound signature of the A10 allows for
hours of listening without fatigue.
FEATURES
• 10 mm dynamic driver with titanium alloy diaphragm for high output and
low distortion
• Linear bass, clear and articulate midrange, and smooth highs
• Optimized silicone ear tips (S, M, L) for strong seal and isolation
• Gold-plated MMCX connectors allow for 360-degree rotation for ideal
positioning
• Reinforced wire wrap near the connector holds the earphone confidently
in place
• Premium silver-plated oxygen-free copper cable in a durable soft-coat
jacket with gold-plated 3.5 mm (1/8 in) plug
SUPPLIED ACCESSORIES
• Protective carrying case
• Detachable 1.5 m cable
• Small, medium and large pairs
of silicone ear tips
NOISE ISOLATION POLAR PATTERN
Noise isolation is the measure of sound attenuation levels achieved with A10
earphones that have been properly fitted in the ear canals with the supplied
silicone ear tips. The noise isolation polar pattern illustrates how attenuation
of the A10 earphones varies as a function of both frequency and direction
of the sound source. In general, lower frequencies are less attenuated than
higher frequencies and sound sources coming the side of the head are less
attenuated than from the front or back. Audix earphones do not carry a Noise
Reduction Rating and are not meant to be used as a hearing protection device.
0 dB
0 dB
-10
-10
-20
-20
-30
-30
-40
-40
2 K
4 K
8 K
16 K
125
250
500
1 K
SPECIFICATIONS
Operating PrincipleDynamic – moving coil
Sensitivity (@ 1 kHz)105 dB SPL/mW
Frequency Response18 Hz – 19 kHz
Impedance 35 Ohms
Noise Isolation*25 dB @ 1 kHz
*See noise isolation polar pattern
Driver Size10 mm
Diaphragm Titanium Alloy
Magnet Neodymium
Shell Crystal Polycarbonate,
tuned and vented
Connectors MMCX, 3.5 mm (1/8 in)
Cable 1.5 m detachable MMCX,
braided, oxygen-free
copper, 40 µin silver-plated

Betygsätt denna manual


Produktspecifikationer

Varumärke: Audix
Kategori: Öronpropp
Modell: A10
Produkttyp: Hörlurar
Rekommenderad användning: Scen/studio
Impedans: 35 Ω
Mikrofontyp: Ej tillgänglig
Membranmaterial: Titan
Drivenhet: 10 mm
Kabellängd: 1.5 m
Produktens färg: Svart
Bärstil: I öra
3,5 mm kontakt: Ja
Headset-typ: Binaural
Material, hölje: Polykarbonat
Magnetmaterial: Neodymium
Anslutningsteknologi: Kabel
Bluetooth: Nej
Typ av örondel: Intraaural
Hörlurarnas frekvens: 18 - 19000 hz
Hörlurarkänslighet: 105 dB
Intraural hörlurar, typ: I öra monitorer
Driver-typ: Dynamisk
Laddningsställ: Nej

Behöver du hjälp?

Om du behöver hjälp med Audix A10 ställ en fråga nedan och andra användare kommer att svara dig