Auray WSB-1S Bruksanvisning

Läs gratis den bruksanvisning för Auray WSB-1S (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 21 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 11 recensioner. Har du en fråga om Auray WSB-1S eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
Carry Bag
for Wireless System
WSB-1S
Fits single wireless
microphone system
Foam cutouts for receiver,
transmitter, and
handheld microphone
Front access to receiver
controls
Compartment for carrying
lavalier mics, batteries,
and accessories
Back zippered opening for
cabling
Inserting a Receiver
Remove the spacers
adhesive cover and press
the spacer onto the bottom
of your receiver.
Fold down the
touch-connect straps over
the top of the receiver.
Insert the receiver into the
slot.
Push the straps through
the strap tie-down holes,
pull them until tight, and
press them down onto the
touch-connect strip.
1
3 4
2
Antennas and Power Cables
Use the back compartment
to attach antennas.
Unzip the back opening to
connect power and
microphone cables.
Remove the spacer cube if
additional space is needed
in the accessory
compartment or for a long
transmitter antenna.
Fold back the top ap and
attach it to the
touch-connect strips on
the back of the case for
access to controls, cabling,
and antennas.
1
3 4
2

Produktspecifikationer

Varumärke: Auray
Kategori: Inte kategoriserad
Modell: WSB-1S

Behöver du hjälp?

Om du behöver hjälp med Auray WSB-1S ställ en fråga nedan och andra användare kommer att svara dig