Autel MaxiLink ML319 Bruksanvisning
Autel
Inte kategoriserad
MaxiLink ML319
Läs gratis den bruksanvisning för Autel MaxiLink ML319 (45 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 7.5 recensioner. Har du en fråga om Autel MaxiLink ML319 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/45

i
Trademarks
Autel
®
, MaxiSys
®
, MaxiDAS
®
, MaxiScan
®
, MaxiRecorder
®
, MaxiTPMS
®
, and
MaxiCheck
®
are trademarks of Autel Intelligent Technology Corp., Ltd.,
registered in China, the United States and other countries. All other marks are
trademarks or registered trademarks of their respective holders.
Copyright Information
No part of this manual may be reproduced, stored in a retrieval system or
transmitted, in any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, without the prior written permission of Autel.
Disclaimer of Warranties and Limitation of Liabilities
All information, specifications and illustrations in this manual are based on the
latest information available at the time of printing.
Autel reserves the right to make changes at any time without notice. While
information of this manual has been carefully checked for accuracy, no
guarantee is given for the completeness and correctness of the contents,
including but not limited to the product specifications, functions, and
illustrations.
Autel will not be liable for any direct damages or for any special, incidental, or
indirect damages or for any economic consequential damages (including lost
profits).
IMPORTANT
Before operating or maintaining this unit, please read this manual carefully,
paying extra attention to the safety warnings and precautions.
For Services and Support:
http://pro.autel.com
www.autel.com
1-855-288-3587/1-855-AUTELUS (North America)
0086-755-8614 7779 (China)
support@autel.com
For details, please refer to the Service and Support section in this manual.

ii
Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the scan tool, read
this instruction manual first and observe the following safety precautions at
a minimum whenever working on a vehicle:
Always perform automotive testing in a safe environment.
Wear safety eye protection that meets ANSI standards.
Keep clothing, hair, hands, tools, test equipment, etc. away from all
moving or hot engine parts.
Operate the vehicle in a well-ventilated work area: Exhaust gases are
poisonous.
Put blocks in front of the drive wheels and never leave the vehicle
unattended while running tests.
Use extreme caution when working around the ignition coil, distributor
cap, ignition wires and spark plugs. These components create
hazardous voltages when the engine is running.
Put the transmission in PARK (for automatic transmission) or
NEUTRAL (for manual transmission) and make sure the parking brake
is engaged.
Keep a fire extinguisher suitable for gasoline/chemical/ electrical fires
nearby.
Don’t connect or disconnect any test equipment while the ignition is on
or the engine is running.
Keep the scan tool dry, clean, free from oil/water or grease. Use a mild
detergent on a clean cloth to clean the outside of the scan tool, when
necessary.

iii
CONTENTS
1 GENERAL INFORMATION ......................................................................... 1
ON-BOARD DIAGNOSTICS (OBD) II ................................................................. 1
DIAGNOSTIC TROUBLE CODES (DTCS) ............................................................ 1
LOCATION OF THE DATA LINK CONNECTOR (DLC) ............................................ 2
OBD II READINESS MONITORS ....................................................................... 3
OBD II MONITOR READINESS STATUS ............................................................. 4
OBD II DEFINITIONS ...................................................................................... 5
OBD II MODES OF OPERATION ....................................................................... 6
2 USING THE SCAN TOOL ........................................................................... 8
TOOL DESCRIPTION ....................................................................................... 8
SPECIFICATIONS ............................................................................................ 9
ACCESSORIES INCLUDED ................................................................................ 9
NAVIGATION CHARACTERS ............................................................................. 9
KEYBOARD .................................................................................................. 10
POWER ....................................................................................................... 10
SYSTEM SETUP ........................................................................................... 10
ABOUT ........................................................................................................ 17
VEHICLE COVERAGE .................................................................................... 17
PRODUCT TROUBLESHOOTING ...................................................................... 18
3 OBD II DIAGNOSTICS ............................................................................. 20
READ CODES .............................................................................................. 21
ERASE CODES ............................................................................................ 24
LIVE DATA .................................................................................................. 25
VIEW FREEZE FRAME DATA .......................................................................... 26
RETRIEVE I/M READINESS STATUS ................................................................ 27
VIEW VEHICLE INFORMATION ........................................................................ 32
EXIT THE OBD II TEST ................................................................................. 33
4 READY TEST ........................................................................................... 34
GENERAL INFORMATION ............................................................................... 34
TEST TOOL APPLICATION .............................................................................. 34
LED AND TONE INTERPRETATION .................................................................. 36
5 COMPLIANCE INFORMATION ................................................................ 38
Produktspecifikationer
Varumärke: | Autel |
Kategori: | Inte kategoriserad |
Modell: | MaxiLink ML319 |
Färg på produkten: | Wit |
Vikt: | 510 g |
Höjd: | 91.7 mm |
Snäll: | IP-beveiligingscamera |
Husmaterial: | Aluminium |
Internationell säkerhetskod (IP): | IP66 |
LED-indikatorer: | Ja |
Blåtand: | Nee |
Minneskortets maximala kapacitet: | 128 GB |
Vormfaktor: | Dome |
Placeringsstöd: | Buiten |
Anslutningsteknik: | Bedraad |
Ethernet LAN: | Ja |
Monteringsmetod: | Plafond |
Maximal upplösning: | 2592 x 1944 Pixels |
Totalt antal megapixlar: | 5 MP |
Videokomprimeringsformat: | H.264, H.265, M-JPEG |
Diameter: | 120.3 mm |
Typ av strömkälla: | Power over Ethernet (PoE) |
Minimal belysning: | 0.15 Lux |
Antal kameror: | 1 |
Integrerad minneskortläsare: | Ja |
Kompatibla minneskort: | MicroSD (TransFlash), MicroSDHC, MicroSDXC |
Nattseende: | Ja |
LED-typ: | IR |
Fast brännvidd: | 2.8 mm |
Video rörelsedetektering: | Ja |
Antal Ethernet LAN (RJ-45)-portar: | 1 |
Strömförbrukning (max): | 7.5 W |
Optisk sensorstorlek: | 1/2.8 " |
Bildsensortyp: | CMOS |
vitbalans: | ATW, AWC, Indoor, Manual, Outdoor |
Typ kamerasluter: | Elektronisch |
Grafikupplösningar som stöds: | 640 x 360,640 x 480 (VGA),720 x 480,768 x 576,800 x 448,800 x 600 (SVGA),1280 x 960,1920 x 1080 (HD 1080),2592 x 1944 |
Brusreducering: | Ja |
Nätverksstandard: | IEEE 802.1x |
Stöder Windows: | Ja |
Antal användare: | 6 gebruiker(s) |
Förvaringstemperatur: | -30 - 60 °C |
Säkerhetsfunktioner: | Vandaalbestendig |
Nätverksprotokoll som stöds: | IPv4, IPv6, TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTCP, RTSP, NTP, HTTP, HTTPS, SSL/TLS, DHCP, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3(MIB-2), ARP, DNS, DDNS, QoS, UPnP, Bonjour, LLDP |
Stöder Mac-operativsystem: | Ja |
Förvaringsfuktighet: | 0 - 90 procent |
IP-adressfilter: | Ja |
Progressiv skanning: | Ja |
Ethernet-gränssnittstyp: | 10 Gigabit Ethernet, 100 Gigabit Ethernet |
Språk som stöds: | CHI (SIMPL), CHI (TR), CZE, DEU, DUT, ENG, ESP, FRE, GRE, HUN, ITA, JPN, KOR, POL, POR, RUS, SWE, TUR |
Quality of Service (QoS): | Ja |
Jag kodar: | IK10 |
Typ av styrkareglering: | Handmatig |
Panoreringsintervall: | 0 - 350 ° |
Dag/nattläge: | Ja |
Maximalt antal bländare: | 2 |
Strömningsmetod: | Multicast, Unicast |
Videostreaming: | Ja |
Night vision scope: | 20 m |
Bakgrundsljuskompensation: | Ja |
Antal effektiva pixlar (H x V): | 2592 x 1944 Pixels |
Larmingång/utgång: | Ja |
Bithastighetskontroll: | Constant Bit Rate (CBR)/Variable Bit Rate (VBR) |
Wide Dynamic Range (WDR): | Ja |
Wifi: | Nee |
Strömförbrukning (typiskt): | 5.8 W |
Drifttemperatur (TT): | -30 - 55 °C |
Relativ luftfuktighet i drift (VV): | 0 - 90 procent |
Tiltvinkelområde: | 0 - 67 ° |
Justering av slutarhastighet: | Handmatig |
Mask privat zon: | Ja |
Linsens betraktningsvinkel, horisontell: | 104.7 ° |
Rotera & spegla: | Ja |
Typ av varningsmeddelande: | |
Betraktningsvinkellins, diagonal: | 136 ° |
Linsens betraktningsvinkel, vertikal: | 76.5 ° |
Aktivt larm för obehörig demontering: | Ja |
Behöver du hjälp?
Om du behöver hjälp med Autel MaxiLink ML319 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Autel Manualer
24 Mars 2025
27 Oktober 2024
11 Oktober 2024
9 Oktober 2024
5 Oktober 2024
23 September 2024
23 September 2024
21 September 2024
21 September 2024
21 September 2024
Inte kategoriserad Manualer
- Master Lock
- Comar
- Infiniton
- Hotpoint-Ariston
- Aqua Joe
- Axis
- Weston
- Kica
- Liftmaster
- Zeiss
- EQ3
- Jay-tech
- Silent Angel
- FALLER
- Enerdrive
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025