Avantco 177EG36N Bruksanvisning
Avantco
grill platta
177EG36N
Läs gratis den bruksanvisning för Avantco 177EG36N (7 sidor) i kategorin grill platta. Guiden har ansetts hjälpsam av 5 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 3 recensioner. Har du en fråga om Avantco 177EG36N eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/7
www.AvantcoEquipment.com 1
Models: 177EG16N, 177EG24N, 177EG30N, 177EG36N, 177EG48N
Electric Griddles
Please read and keep these instructions. Indoor use only.
Intertek
10/2021
User Manual
User Manual
2 www.AvantcoEquipment.com
Specifications
Model Voltage Power Dimensions (LxWxH) Temp. Range Net Wt. Shipping Wt. Plug Type
177EG16N
177EG24N
177EG30N
177EG36N
177EG48N
120V AC
208V/240V
208V/240V
208V/240V
208V/240V
1750W
2675/3560W
3375/4500W
7488/10080W
10482/14000W*
120°F - 570°F
120°F - 570°F
120°F - 570°F
120°F - 570°F
120°F - 570°F
52 lbs.
80 lbs.
87 lbs.
201 lbs.
364lbs.
62 lbs.
90 lbs.
110 lbs.
218 lbs.
518lbs.
NEMA 5-15P
NEMA 6-20P
NEMA 6-20P
HARD WIRED
HARD WIRED
Safety
1. Ensure that the power supply you are using is adequate for continual grilddle use and the voltage is correct.
2. This equipment MUST HAVE at least 12" of space clearance from combustible construction on the sides,
back, top and front.
3. Unplug the unit when not in use and before cleaning.
4. Do not immerse unit, cord, or plug in liquid at any time.
5. Do not operate unattended.
6. Do not use this unit for anything other than its intended use.
7. Do not use outdoors.
8. Always use on a firm, dry, and level surface.
9. Do not use if unit has a damaged cord or plug, in the event the appliance malfunctions, or has been damaged in any
manner.
10. Any incorrect installation, alterations, adjustments, and/or improper maintenance can lead to property loss and injury. All
repairs should be done by authorized professionals.
Exhaust Canopy
Griddles inherently create a good deal of heat and smoke and should be installed under an efficient exhaust hood with flame
proof filters. A vertical distance of not less than 48” shall be provided between the top of the appliance and filters or any other
combustible material. Exhaust installation must conform to local codes.
Connecting Power Supply
For hardwired models, an electrician will need access to the bottom of the units. Additionally, a 50 Amp breaker is needed
per junction box if installing separate connections; or one 80 Amp breaker if both are wired into the same breaker. A
professional electrician is needed to install hard-wired units. See wiring diagrams and model voltage below. Please check
the product page for installation guidelines.
Instructions for First Time Use
There is a thin layer of wax paper on top of the grill plate that must be removed prior to using the griddle.
In order to protect the plates of your new grill during transportation, a layer of food-safe oil was coated on the surface prior to
shipment. This oil is harmless, but must be removed before you begin to use. To remove, preheat the grill until the oil liquifies.
All units come with a 6 ft. commercial cord except 177EG36N
and 177EG48N which must be hardwired
16" x 19.75" x 13"-15"
24" x 19.75" x 13"-15"
30" x 19.75" x 13"-15"
36" x 19.75" x 13"-15"
48" x
24.70" x 13"-15"
User Manual
www.AvantcoEquipment.com 3
Next, carefully wipe away the melted oil with a clean, soft cloth and rinse with a mixture of 1/4 cup vinegar to 1 qt. water. To
season, spread unsalted solid shortening or liquid frying compound evenly over the entire griddle surface. Turn all griddle
burners to medium and wait until the shortening begins to smoke, then turn the burners OFF. Rub the now melted shortening
into the griddle surface with burlap, moving in the direction of the surface’s polish marks and covering the entire surface.
Allow the griddle to cool. When the griddle is cool after the second seasoning, wipe it with a thin film of shortening or cooking oil.
Adjustable feet installation
Ensure that all feet are installed correctly before the operation of this griddle. Your griddle includes four adjustable feet, that
are packaged unattached. Each foot has a screw protruding from the top for assembly. Locate the four screw holes at each
corner of the bottom housing of the griddle. Insert the screw and turn the foot clockwise until snug. Repeat for all four feet.
The height of the feet can be adjusted by rotating the bottom of the foot. Ensure that all four feet are adjusted to the same
height to make a level cooking surface.
Operation
1. Plug the power cord into the appropriate outlet. The red "Power" light will illuminate.
2. Set the desired temperature by turning the rotary temperature knob clockwise. The heating element will begin to heat up
and the green "Heating" light will illuminate.
3. When the temperature reaches the desired setting, the green "Heating" light will cycle on and off with the heating element
to maintain the set temperature.
4. For best results, allow the unit to preheat for 15 minutes before placing food on cooking surface.
5. Turn temperature knob to the "Off" position to turn the green "Heating" light and heating element off. You must unplug the
unit for the red "Power light" to turn off.
Transportation And Maintenance
During transportation, the machine should be handled with care.
Cleaning
1. After each use, scrape the griddle with a scraper or flexible spatula to remove excess grease and food. A grease tray
is provided for the drippings. If there is an accumulation of burned-on grease and food, the griddle should be thoroughly
scoured and re-seasoned. Please follow Noble Chemical Griddle Kleen instructions below:
Evenly pour a thin layer of GRIDDLE KLEEN over the hot griddle surface (300° - 350°F). Immediately spread the liquid with a
compatible high heat sponge over the entire cooking area and gently scrub heavily soiled spots as needed. Allow a thin layer
of GRIDDLE KLEEN to remain in contact with the warm grill surface for a few minutes. Then, wipe or squeegee into the grease
tray. Turn off the griddle. Rinse the surface and wipe clean with a thick damp cloth. Apply a thin coating of liquid shortening to
prevent the surface from rusting.
2. Daily, use a clean cloth and a good non-abrasive cleaner to clean the stainless steel body of the griddle. Wipe the polished
front with a soft cloth.
3. At least once a day, remove the waste drawer and wash in the same way as an ordinary cooking utensil. The drawers are
removed by pulling forward until they are released from their track.
Everything you need to clean and
sanitize your griddle can be found in
this handy griddle gear cleaning kit.
Keep your grill clean and free of grease
and other buildup with this Noble Chemical
Griddle Kleen liquid grill / griddle cleaner!
Produktspecifikationer
| Varumärke: | Avantco |
| Kategori: | grill platta |
| Modell: | 177EG36N |
Behöver du hjälp?
Om du behöver hjälp med Avantco 177EG36N ställ en fråga nedan och andra användare kommer att svara dig
grill platta Avantco Manualer
3 Juli 2025
3 Juli 2025
3 Juli 2025
3 Juli 2025
2 Juli 2025
2 Juli 2025
2 Juli 2025
2 Juli 2025
2 Juli 2025
2 Juli 2025
grill platta Manualer
- BEKO
- Medion
- Bartscher
- Fagor
- Smeg
- Nedis
- Bestron
- Ufesa
- Proctor Silex
- Rotel
- Vulcan
- Backyard Pro
- MagiKitch'n
- AccuTemp
Nyaste grill platta Manualer
28 Juni 2025
25 Juni 2025
22 Juni 2025
21 Juni 2025
18 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025