Avantco 177EMBS65SS Bruksanvisning
Läs gratis den bruksanvisning för Avantco 177EMBS65SS (8 sidor) i kategorin såg. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2 recensioner. Har du en fråga om Avantco 177EMBS65SS eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8

www.AvantcoEquipment.com 1
65" Electric Meat & Bone Saw
Models: 177EMBS65SS
Please read and keep these instructions. Indoor use only.
08/2021
User Manual

User Manual
2 www.AvantcoEquipment.com
WARNING
The warnings, cauons, and instrucons discussed in this instrucon manual
cannot cover all possible condions or situaons that could occur. It must be
understood by the operator that common sense and cauon are factors that
cannot be built into this product, but must be supplied by the operator.
General Safety Regulations
Please use this machine according to these cautions. The user should understand all rules. Please carefully read them
before you operate the machine. This machine may cause harm to the health of the operator if the user removes or
changes equipment in the machine.
We are not responsible for any injuries resulting from improper operation of this machine. Please operate according to
“Operation Method” instructions and follow the proper operation procedures while using. Take care while assembling
and operating, in order to avoid scratching skin. Please avoid putting hands around the saw blade to prevent any pos-
sible injuries. Please read the instruction manual.
• Keep all loose clothing, away from moving parts when the saw is in use.
• Keep fingers and hair away from moving parts when saw is in use.
• Turn the unit off before unplugging it from the outlet.
• Always unplug it when changing a part on the saw.
• Unplug when assembling or disassembling the unit.
• Always provide supervision when this appliance is being used near children.
• Do not disassemble the saw during operation.
• Avoid contact with moving parts.
• Do not use the saw if the power cord is broken.
• To protect against risk of electrical shock, do not put any electrical components, such as the motor or cord, in water
or other liquids.
• Unplug this unit from the outlet before putting on or taking off parts, and before cleaning.
• Do not use fingers to scrape food away from the discharge disc while the appliance is operating. A cut type injury
may result.
• Do not operate your appliance if it has a damaged cord or plug, after it malfunctions, or if it is dropped and dam-
aged in any manner.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
• Do not use outdoors.
• Do not let the cord hang over edge of table or counter.
• SAVE THESE INSTRUCTIONS.
Item Power Electric Source Saw Length Work Table Size
177EMBS65SS 750W, 1 HP 17.2" x 18.31" 110V/60Hz 65"
Technical Details

User Manual
www.AvantcoEquipment.com 3
Installation
1. Remove the machine from its packaging and be sure to put it on a grounded, level, and even surface while assem-
bling or disassembling.
2. If your surface is not steady and even, adjust the rubber feet accordingly.
3. Please carefully check that the voltage and power are the same as the label. Check if it is single phase or three
phase, and whether you need to use the earthing wire.
4. Please check that the power line is long enough to connect to the socket and that you are satisfied by the
work arrangement.
5. Once you or any other user opens the machine, please install the saw belt on the top and bottom block. It must be
parallel with the edge on the the block for optimal use.
6. When you’ve finished installing the belt, close the machine’s door. Then please connect the unit with the electric
line, turn on the green switch, and check that the machine works.
7. When you are ready to stop the machine, turn off the red switch and it will stop at once.
Please attention to these details:
1. The machine will run clockwise if it is running correctly.
2. If the machine belt needs adjusted, please use the handle on top and adjust the belt until the machine makes a slic-
ing sound. When you hear that sound it means the bone saw belt has the correct amount of tension in its position
and you can proceed to use the machine.
Using Condition
1. This machine is to be used for cutting fresh meat and bones. If you want to cut frozen meat and bones, the right
saw blade should be chosen.
2. This machine should be operated according to this manual.
3. The service life of your saw blade depends on what you’re using it to cut and the pressure. Usually it has a stan-
dard use for 2000 lb to 4400 lb, but if you’re using the machine for sawing meat without the bone, the blade will
have a longer lifespan. The undular saw blade can be used to cut fresh meat in order to have a longer lasting use.
And you can turn over the saw blade and use the other side of the blade as well.
4. Please read the manual to completion and then operate according to the instructions. If the door of the machine is
open, if there is no security push device, or if you’re missing a saw blade protection device, please stop using the
machine immediately.
IF YOU USE AND EXTENSION CORD, MAKE SURE TO USE ONLY UL APPROVED CORDS WITH
THE CORRECT GAUGE AND LENGTH.
Nameplate
Amperes
Extension Cord Length
25’ 75’50’ 100’ 150’ 200’
0-5 16 16 16 14 12 12
5.1-8 16 16 14 12 19 -
8.1-12 14 14 12 10 - -
12.1-15 12 12 10 10 - -
15.1-20 10 10 10 - - -
Produktspecifikationer
Varumärke: | Avantco |
Kategori: | såg |
Modell: | 177EMBS65SS |
Behöver du hjälp?
Om du behöver hjälp med Avantco 177EMBS65SS ställ en fråga nedan och andra användare kommer att svara dig