Avantco 177SL309 Bruksanvisning
Avantco
ej kategoriserat
177SL309
Läs gratis den bruksanvisning för Avantco 177SL309 (15 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 1.5 recensioner. Har du en fråga om Avantco 177SL309 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/15
1 www.AvantcoEquipment.com
Meat Slicer Instruction Manual
Models: SL309, SL310, SL312, SL512, SL713
Please read and keep these instructions. Indoor use only.
09/2022
User Manual
User Manual
2 www.AvantcoEquipment.com
Unpacking:
Unpack the product and check for any damage incurred during transit. This should be reported to the responsible
carrier, railway or postal authority, and a request for a damage report should be made.
These instructions must be followed for us to guarantee our full support of your claim for
protecting against loss from concealed damage. The form for filing such a claim will be
provided by the carrier.
General Installation And Operation
Instructions:
The Avantco Auto/Manual slicer is a medium duty electrically driven appliance. The unit has been designed to meet the
highest safety and hygiene standards. The robust aluminum construction and powerful drive motors ensure long and
reliable operation and use.
1. Place the unit in the desired location with the on/off switch facing the operator. DO NOT plug the unit in at this point.
The supporting table should be stable and at the correct working height. The work surface should be in a dry location
and preferably away from heavy trafc areas.
2. Clean the unit with a DAMP cloth using a neutral P.H. dish detergent. Wipe and dry the machine. (See Cleaning in-
structions on page 3 of this manual.
3. Set the thickness of slice required using the control knob adjacent to the on/off switch.
4. The meat support platform should be in the start position that is close to the operator. Lift up the food pusher; place
the meat to be sliced on the support platform against the raw edge. Return the food pusher to its original position
now on top of the meat to be sliced.
5. Switch on the motor, and using the handle on the food pusher, push the carriage back and forth to begin cutting the food.
6. After you are nished cutting, turn off machine and collect the product slices in the exit area.
7. Please Note: The blade-sharpening device is NOT factory tted on MODELS SL310, SL312 SL512 AND SL713MAN. To t,
follow the procedure below.
a) Fit the sharpening device in the socket provided, ensuring the grinding stones are positioned at the rear of the machine.
b) Tighten the safety locking screw.
To replace the belt, please remove the knife and motor, then remove belt through the hole under the knife. Then, install the
new belt and reassemble.
!
Cut through the greasiest dishes, glassware, cutlery, pots, and pans with Sunbright pot
and pan dishwashing liquid. This heavy-duty pot and pan dishwashing liquid was specially
designed for the institutional environment with its super concentrated, high active, high
sudsing formula. Available in 32 oz. bottles (12/case) or 5 gallon bulk supply.
User Manual
3 www.AvantcoEquipment.com
Safety
1. The units are designed to operate an alternating current (A.C) only. DO NOT CONNECT TO DIRECT CURRENT (D.C).
2. Please ensure that the power supply cord does not come into contact with hot surfaces.
3. If the supply cord is damaged, it must be replaced with a new cord assembly. (Available from the suppliers agent.)
4. The appliance must only be used for its intended purpose.
5. It is strongly suggested that the operators of this machine wear close tting clothes. It is essential when blade
maintenance or cleaning is undertaken that suitable hand protection gloves are used.
6. ALWAYS unplug the slicer before undertaking cleaning or maintenance of the unit.
7. These machines must be operated by trained personnel and should never be used by unskilled operators or children.
8. The blade must be replaced when it has reduced in size by 5mm.
Blade Sharpening
1. This operation should be undertaken if the cutting blade becomes dull. It should be noted that the blade is made from
hardened material and under normal use should only need sharpening once a year.
2. Unplug the unit.
3. Ensure that the slice thickness knob is in the ‘0’ position.
4. CAREFULLY clean the part of the blade to be sharpened.
5. Unlock the sharpening device using the safety locking screw. Lift up the sharpening assembly and rotate it 180° so
that both grinding wheels are in the correct position. Lower the sharpening device and lock in position.
6. Plug in the machine and switch on.
7. Using the button at the rear of the sharpening unit, push the stone against the rotating blade for approximately 30
seconds.
8. After sharpening, it is important to remove the grinding wheel from the blade by letting go of the push button on the
front of the sharpening device. Run the slicer for 2-3 seconds after letting go of this button.
9. Return the sharpening device to its original position by unlocking the safety screw and rotating by 180°.
LubriQuik food grade silicone spray lubricant is ideal for use on virtually any equip-
ment or machinery that makes contact with food, such as slicers, conveyor sys-
tems, bottling and canning machinery, bakery equipment, and dairy equipment.
Produktspecifikationer
| Varumärke: | Avantco |
| Kategori: | ej kategoriserat |
| Modell: | 177SL309 |
Behöver du hjälp?
Om du behöver hjälp med Avantco 177SL309 ställ en fråga nedan och andra användare kommer att svara dig
ej kategoriserat Avantco Manualer
22 Juni 2025
ej kategoriserat Manualer
- Homematic IP
- Axis
- HK Audio
- Sabrent
- Arkon
- Ryobi
- ZKTeco
- LG
- Tripp Lite
- Nedis
- Razer
- Fagor
- Aspes
- Aconatic
- Makita
Nyaste ej kategoriserat Manualer
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025