Avocent Matrix Bruksanvisning
Läs gratis den bruksanvisning för Avocent Matrix (2 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 37 personer och har ett genomsnittsbetyg på 4.5 stjärnor baserat på 19 recensioner. Har du en fråga om Avocent Matrix eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
®
Quick Installation Guide
1
To Contact Avocent Technical Support: Visit www.avocent.com 590-1143-501B
Emerson, Emerson Network Power and the Emerson Network Power logo are trademarks or service trademarks of Emerson Electric Co. Avocent, the Avocent logo are trademarks or service trademarks of Avocent
Corporation. This document may contain confidential and/or proprietary information of Avocent Corporation, and its receipt or possession does not convey any right to reproduce, disclose its contents, or to manufacture or sell
anything that it may describe. Reproduction, disclosure, or use without specific authorization from Avocent Corporation is strictly prohibited. ©2013 Avocent Corporation. All rights reserved.
1Assembling the rack mount rails
Each rack mount rail consists of two
brackets. For the right rail, slide the
two A brackets together. For the left
rail, slide the two B brackets together.
When installing the rail assemblies into
the rack cabinet, make sure the rail
flanges point away from the center of
the rack.
NOTE: The brackets are not interchange-
able. Be sure to use the A rack rail
assembly on the right side of the rack
cabinet and the B assembly on the left
side of the rack cabinet.
2Installing the rack mount rails to
the rack
Using the guide pins on the rails, attach
the two rack mount rail assemblies to
the front and back of the the rack and
tighten the captive screws.
3
Installing the switch in the rack
From the rear of the rack, slide the
switch into the rails. Ensure the switch
brackets are securely inserted into the
rails and tighten the screws to secure
the switch.
4Verifying switch placement in
the rack
Be sure that the back of the Matrix
switch is mounted in the rear of the rack.
Rack mounting the switch
2
3
Square Hole
in Rear Rail
Flange
No Hole
in Front Rail
Flange
Front of Rack
Rear of Rack
4
Captive
Screw
Guide
Pin
(VIEW FROM
ABOVE)
Rail Flange
Rail Flange
FRONT
Of Rack Cabinet
BACK
Of Rack Cabinet
Rack Rail
Assembly
‘B’
(LHS)
Rack Rail
Assembly
‘A’
(RHS)
1
HELPFUL RESOURCES
Product documentation
downloads are available at:
www.avocent.com/manuals
– or –
Search for additional product
information at:
www.avocent.com
For further assistance contact
Avocent Technical Support.
Produktspecifikationer
| Varumärke: | Avocent |
| Kategori: | Växla |
| Modell: | Matrix |
Behöver du hjälp?
Om du behöver hjälp med Avocent Matrix ställ en fråga nedan och andra användare kommer att svara dig
Växla Avocent Manualer
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
Växla Manualer
- Roline
- STI
- DEHN
- Dahua Technology
- QNAP
- Vimar
- Smart-AVI
- Grandstream
- Engenius
- One For All
- Behringer
- Berker
- Phoenix Contact
- Intellinet
- Shimano
Nyaste Växla Manualer
9 April 2025
9 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
3 April 2025
3 April 2025
2 April 2025