AXESS AX-ADGM04 Bruksanvisning


Läs gratis den bruksanvisning för AXESS AX-ADGM04 (12 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 10 recensioner. Har du en fråga om AXESS AX-ADGM04 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/12
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
AX-ADGM04
I N S TA L L AT I O N I N S T R U C T I O N S
INTRODUCTION
INTERFACE FEATURES
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun, solder,
and heat shrink • Small flat-blade screwdriver
• Tape
• Wire cutter • Zip ties
TABLE OF CONTENTS
Connections to be made
For models
without
an amplifier .......................3
For models
with
an analog amplifier ................4
For models
with
a digital amplifier ...................5
12-pin pre-wired ASWC-1 harness ......................6
DIN jack ................................................................6
Installing & programming the AX-ADGM04
AX-ADBOX1 ...........................................................6
AX-ADBOX2 ..........................................................7
Adjusting the AX-ADGM04 ....................................8
Extra features .........................................................9
GM Data Interface 2012-2016
APPLICATIONS
See inside front cover
The AX-ADGM04 harness is designed for, and must be used with, the
AX-ADBOX1 or AX-ADBOX2 interface (sold separately). Please refer to the
AX-ADBOX1 or AX-ADBOX2 for the 16-pin connector with stripped leads
.
Provides accessory power (12-volt 10-amp)
Maintains the retained accessory power
(R.A.P.) feature
Provides NAV outputs (parking brake,
reverse, speed sense)
Retains chimes
Retains OnStar / OE Bluetooth
Adjustable OnStar level
Retains RSE (rear seat entertainment)
Retains satellite radio
Retains the factory AUX-IN jack
Pre-wired ASWC-1 harness
(ASWC-1 sold separately)
Can be used in non-amplified, or analog/
digital amplified models
Retains balance and fade†
Micro-B USB updatable
INTERFACE COMPONENTS
• AX-ADGM04 harness
• 4-pin to 4-pin resistor pad harness
† To retain fade in digital amplified models, use the AX-ADBOX1


Produktspecifikationer

Varumärke: AXESS
Kategori: Inte kategoriserad
Modell: AX-ADGM04

Behöver du hjälp?

Om du behöver hjälp med AXESS AX-ADGM04 ställ en fråga nedan och andra användare kommer att svara dig