AXESS AXDIS-TY3 Bruksanvisning
AXESS
Inte kategoriserad
AXDIS-TY3
Läs gratis den bruksanvisning för AXESS AXDIS-TY3 (24 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 9 recensioner. Har du en fråga om AXESS AXDIS-TY3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/24
AXDIS-TY3
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 6/12/24 INSTAXDIS-TY3
INTERFACE FEATURES
TOOLS REQUIRED
Toyota Interface with SWC 2018-2021
APPLICATIONS
• Designed for both amplified and non-amplified models
• Provides accessory power (12-volt 10-amp)
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains the factory AUX-IN jack
• Retains the factory backup camera
• Includes an AXCSD-6V 12-to-6V step-down for the factory camera
• Retains audio controls on the steering wheel
• Retains balance on amplified models
(non-amplifed models retain balance and fade)
• Micro-B USB updatable
TOYOTA
4Runner ....................... 2020-Up
Avalon .......................... 2019-Up
C-HR ............................. 2019-Up
Camry........................... 2018-Up
Corolla .......................... 2019-Up
Highlander ................... 2020-Up
RAV4 ............................ 2019-Up
Sequoia ........................ 2020-Up
Sienna .......................... 2018-Up
Tacoma ........................ 2020-Up
Tundra ......................... 2020-2021
INTERFACE COMPONENTS
• AXDIS-TY3 interface • AXDIS-TY3 harness (LD-TYAMP3-SWC)
• Female 3.5mm connector with stripped leads
• AXCSD-6V
TABLE OF CONTENTS
Connections:
LD-TYAMP3-SWC ....................................................2
3.5mm Jack Steering Wheel Control Retention
... 3
Installing the AXDIS-TY3........................................3
Programming the AXDIS-TY3 ...............................4
Audio Level Adjustment .......................................4
Steering Wheel Control Settings ......................5-8
LED Feedback .......................................................5
Changing Radio Type ..........................................6
Remapping the SWC Buttons .............................7
Dual Assignment Instructions
.............................8
Troubleshooting.....................................................9
Product Info
Visit AxxessInterfaces.com for more detailed information
about the product and up-to-date vehicle specific applications.
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Small flat-blade screwdriver
• Tape
• Wire cutter
• Zip ties
ATTENTION: With the key out of the ignition, disconnect
the negative battery terminal before installing this product.
Ensure that all installation connections, especially the air
bag indicator lights, are plugged in before reconnecting the
battery or cycling the ignition to test this product.
NOTE: Refer also to the instructions included with the
aftermarket accessory before installing this device.
Produktspecifikationer
| Varumärke: | AXESS |
| Kategori: | Inte kategoriserad |
| Modell: | AXDIS-TY3 |
Behöver du hjälp?
Om du behöver hjälp med AXESS AXDIS-TY3 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad AXESS Manualer
26 Februari 2025
26 Februari 2025
26 Februari 2025
26 Februari 2025
26 Februari 2025
26 Februari 2025
26 Februari 2025
26 Februari 2025
26 Februari 2025
26 Februari 2025
Inte kategoriserad Manualer
- QZ
- Petri
- Yale
- Irobot
- DoughXpress
- My Arcade
- Revamp
- Jata
- Comfee
- Tristar
- Milesight
- Amica
- Nexxt
- Atomos
- Zenza Bronica
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025