AXESS AXHN-1 Bruksanvisning


Läs gratis den bruksanvisning för AXESS AXHN-1 (4 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 10.5 recensioner. Har du en fråga om AXESS AXHN-1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/4
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
AXHN-1
I N S TA L L AT I O N I N S T R U C T I O N S
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Small flat-blade
screwdriver • Tape • Wire cutter • Zip ties
TABLE OF CONTENTS
Connections to be made .......................................2
Installing the AXHN-1 .............................................3
Programming the AXHN-1 .....................................3
Setting the factory clock .......................................3
Troubleshooting .....................................................3
Honda Clock Retention 2012-2014
APPLICATIONS
Provides accessory power (12-volt 10-amp)
Can be used in non-amplified, or amplified models
Provides NAV outputs (parking brake, reverse, speed sense)
AXSWC harness included (AXSWC sold separately)
Retains balance and fade
Retains the ability to set the factory clock
Retains the factory AUX-IN jack
Micro-B USB updatable
• AXHN-1 interface • AXHN-1 harness
• 8-pin subwoofer harness
• 16-pin harness with stripped leads
HONDA
Civic * (without NAV) 2013
CR-V (without NAV) 2012-2014
* All trims except LX


Produktspecifikationer

Varumärke: AXESS
Kategori: Inte kategoriserad
Modell: AXHN-1

Behöver du hjälp?

Om du behöver hjälp med AXESS AXHN-1 ställ en fråga nedan och andra användare kommer att svara dig