AXESS AXVI-1788 Bruksanvisning


Läs gratis den bruksanvisning för AXESS AXVI-1788 (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 18 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 9.5 recensioner. Har du en fråga om AXESS AXVI-1788 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
AXVI-1788
REV. 1/21/20 © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
1-800-221-0932 metraonline.com
FEATURES
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Provides NAV outputs (parking brake, reverse, and speed sense)
Prewired AXSWC harness (AXSWC sold separately)
Retains balance and fade
USB updatable
AXVI-1788
Dodge Sprinter 2008-2009 /
Freightliner Sprinter 2008-up
Accessory and NAV Output CAN Interface
Connections to be made
Connect the Yellow wire to the radio’s 12 volt battery or memory wire.
Connect the wire to the radio’s ground wire.Black
Connect the wire to the ignition wire of the aftermarket radio.Red
Connect the wire to the illumination wire of the aftermarket radio. If the Orange
aftermarket radio has no illumination wire, tape off the wire.Orange
Connect the wire to the antenna turn on wire of the aftermarket radio.Blue
Connect the wire to the left front positive speaker output of the aftermarket radioWhite
.
Connect the wire to the left front negative speaker output of the White/Black
aftermarket radio.
Connect the wire to the right front positive speaker output of the aftermarket radio.Gray
CAUTION!
All accessories, switches, climate controls panels, and especially air bag indicator
lights must be connected before cycling the ignition. Also, do not remove the factory radio with
the key in the on position, or while the vehicle is running.


Produktspecifikationer

Varumärke: AXESS
Kategori: Inte kategoriserad
Modell: AXVI-1788

Behöver du hjälp?

Om du behöver hjälp med AXESS AXVI-1788 ställ en fråga nedan och andra användare kommer att svara dig