Axton A400 Bruksanvisning

Läs gratis den bruksanvisning för Axton A400 (17 sidor) i kategorin mottagare. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 4.5 recensioner. Har du en fråga om Axton A400 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/17
INSTALLATION & OPERATION MANUAL
EINBAU & BEDIENUNGSANLEITUNG
1-/2-/4-/5-CHANNEL POWER AMPLIFIERS
A100 A200 A400 A500 I I I
– 2 –
1. CONNECTIONS + CONTROLS A100 - PAGE I
1 SIGNAL INPUTS R / L
Low-level stereo RCA signal or high-level speaker signal input terminal for connection to
head-unit.
2 AUTO-TURN-ON MODE
Slide switch to select the auto-turn-on function: REM by remote wire, VOX to switch on
 bymusicsignalorDCbyDCoffsetsignaloftheheadunitsintegratedamplier.
3 INPUT GAIN CONTROL
Input gain potentiometer for the subwoofer output channel, to match the output voltage
 oftheheadunittotheamplier’sinput.
4 SUBSONIC HIGHPASS FREQUENCY CONTROL
Controlpotentiometertoadjustthesubsonichighpasslteringfrequencypointofthe 
subwoofer output channel.
5 BASS BOOST 0dB to + 18dB
Turn clockwise to get up to + 18dB bass boost or counterclockwise for no boost with a
 45Hzcenterfrequencyoftheampliedoutputsignal.
6 LOWPASS FREQUENCY CONTROL
Controlpotentiometertoadjustthelowpasslteringfrequencypointofthesubwoofer 
output channel.
7 BASS LEVEL REMOTE CONTROL INPUT 1/2-CH
 Inputterminaltoconnecttheexternalbasslevelremotetotheamplier.
8 POWER LED
 LEDtoshowtheoperatingstatusoftheamplierbyblue/redillumination.Blueis
 normalworkingstate,redisprotectmodeofamplier.
9 INPUT MODE SELECTION
Switch to select the proper input sensitivity range: RCA signal input = Low. Speaker
signal input = Hi.
10 SPEAKER OUTPUT TERMINAL
 Outputterminaltoconnectthespeakerstotheamplier.
11 “+12 V” POWER INPUT TERMINAL
 Terminaltoconnecttheampliertothepositive+12Vpoleofthecarbattery.
12 “REM” INPUT TERMINAL
 Terminaltoconnecttheampliertotheautomatic(remote)turn-on/turn-offleadofthe
head unit. By using the REM terminal, you need to switch the Auto-turn-On mode
2 to
the “REM” position.
ThankyouforpurchasingthisAXTONamplier!
Tomaximizetheperformanceofthisamplierandyourcompletecaraudiosysteminstall,we
recommendthatyouacquaintyourselfthoroughlywithalltechnicalfeaturesandcontrolling
options of thisAXTONamplier. Please read this manual carefully, before attempting the
installation.
If,afterreadingthismanual,youstillhavequestionsregardingfunctionsortheinstallationof
theamplier,werecommendthatyouconsultyourdealer.
– 4 –
1. CONNECTIONS + CONTROLS A200 - PAGE I
1 SIGNAL INPUTS R / L
Low-level stereo RCA signal or high-level speaker signal input terminal for connection
to head-unit.
2 AUTO-TURN-ON MODE
Slide switch to select the auto-turn-on function: REM by remote wire, VOX to switch on
 bymusicsignalorDCbyDCoffsetsignaloftheheadunitsintegratedamplier.
3 INPUT MODE SELECTION
Switch to select the proper input sensitivity range: RCA signal input = Low. Speaker
signal input = Hi.
4 INPUT GAIN CONTROL
Input gain potentiometer for the subwoofer output channel, to match the output voltage
 oftheheadunittotheamplier’sinput.
5 OPERATION MODE SWITCH
 SlideswitchtoselecttheoperationmodeoftheX-overoftheamplier:Highpass
 [HPF],Lowpass[LPF]orfullsignal
6 X-OVER FREQUENCY CONTROL
 Controlpotentiometertoadjustthehighpassorlowpasslteringfrequencyofthe
 amplier.
7 POWER LED
 LEDtoshowtheoperatingstatusoftheamplierbyblue/redillumination.Blueis
 normalworkingmode,redisprotectmodeofamplier.
8 SPEAKER OUTPUT TERMINAL
 Outputterminaltoconnectthespeakerstotheamplierineitherstereoorbridged
mode.
9 “+12 V” POWER INPUT TERMINAL
 Terminaltoconnecttheampliertothepositive+12Vpoleofthecarbattery.
10 “REM” INPUT TERMINAL
 Terminaltoconnecttheampliertotheautomatic(remote)turn-on/turn-offleadofthe
head unit. By using the REM terminal, you need to switch the Auto-turn-On mode
2
to the “REM” position.
11 “GND” POWER INPUT TERMINAL
 Terminaltoconnecttheampliertothechassisgroundornegativepoleofthecar
battery.

Produktspecifikationer

Varumärke: Axton
Kategori: mottagare
Modell: A400

Behöver du hjälp?

Om du behöver hjälp med Axton A400 ställ en fråga nedan och andra användare kommer att svara dig