Bang And Olufsen BeoLab 3 Bruksanvisning
Bang And Olufsen
högtalare
BeoLab 3
Läs gratis den bruksanvisning för Bang And Olufsen BeoLab 3 (12 sidor) i kategorin högtalare. Guiden har ansetts hjälpsam av 11 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 6 recensioner. Har du en fråga om Bang And Olufsen BeoLab 3 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/12
Guide
BeoLab 3
Acoustic Lens Technology –
manufactured under license from
Sausalito Audio Works.
To get access to the approval labels,
remove the BeoLab 3 top cap.
NOTE! Prolonged listening at high
volume levels may cause hearing
damages
WARNING: To prevent fi re or electric
shock, do not expose this appliance
to rain or moisture. Do not expose
this equipment to dripping or
splashing and ensure that no objects
fi lled with liquids, such as vases, are
placed on the equipment.
To completely disconnect this
equipment from the AC Mains,
disconnect the power supply cord
plug from the AC receptacle.
This symbol indicates that a
dangerous voltage
constitut ing a risk of electric
shock is present within this
unit.
This symbol indicates that there
are important operating and
maintenance instructions in the
literature accompanying this
unit.
CAUTION: To reduce the risk of
electric shock, do not remove
cover (or back).
No User-serviceable parts inside.
Refer servicing to qualified
service personnel.
Daily use
When you have fi nished setting up the loudspeakers as described on
the following pages, connect the entire system to the mains. The
loudspeakers are designed to be left in standby when not in use.
Switching on and off
When you switch on your system,
the loudspeaker switches on
simul taneously, and the indicator
light shines green.
When you switch off your system,
or mute the sound, the indicator
light turns red.
Cleaning
Clean the loudspeaker surfaces
using a soft, lint-free cloth which
you have dipped in lukewarm
water and wrung fi rmly.
Never use alcohol or other solvents to
clean any parts of the loudspeaker!
Loudspeaker protection
The loudspeaker is equipped with a
thermal protection system which
prevents overheating. If an error
occurs – or the speaker units
become overheated – the system
automatically switches the
loudspeaker to standby, and the
indicator light turns yellow.
To restore the situation:
> Disconnect the loudspeaker from
the mains.
> Allow the system time to reset
(approximately 3–5 minutes).
> Reconnect the loudspeaker to
the mains again.
Should the problem persist, contact
your Bang & Olufsen retailer.
!
3
Indicator light: In daily use the
indicator light shines either red
(standby) or greAen (playing). If an
error occurs – or the speaker units
become overheated – the light
switches to yellow.
Caution: Do not touch the BeoLab 3
top speaker membrane!
Produktspecifikationer
| Varumärke: | Bang And Olufsen |
| Kategori: | högtalare |
| Modell: | BeoLab 3 |
Behöver du hjälp?
Om du behöver hjälp med Bang And Olufsen BeoLab 3 ställ en fråga nedan och andra användare kommer att svara dig
högtalare Bang And Olufsen Manualer
14 Oktober 2024
13 Oktober 2024
13 Oktober 2024
12 Oktober 2024
21 September 2024
17 September 2024
4 September 2024
3 September 2024
26 Augusti 2024
25 Augusti 2024
högtalare Manualer
- IMG Stage Line
- Karcher Audio
- Einhell
- Kramer
- Klark Teknik
- Audiovox
- Niles
- Louroe Electronics
- Transparent
- Terris
- Plantronics
- Conceptronic
- Sinji
- FiveO
- Novero
Nyaste högtalare Manualer
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
1 Augusti 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025