Barska AX12660 Kluis Bruksanvisning

Barska kassaskåp AX12660 Kluis

Läs gratis den bruksanvisning för Barska AX12660 Kluis (2 sidor) i kategorin kassaskåp. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 7.5 recensioner. Har du en fråga om Barska AX12660 Kluis eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

User’s Manual for Key Safe

WARNING

Read all instructions before using this safe.

A. Handle

B. Key Access

C. Key Pad

D. Indicator Lights

E. Key Drop Slot

- Located on the side of the safe

- For security purposes, change the factory default

code as soon as possible. Factory default code

is 159 and 011223.

-Test registered pin code a few times before closing

the safe door.

- Avoid leaving door open and unattended; it will allow

unauthorized individuals to reprogram the safe,

gaining full access to the safe and its contents.

- Store emergency keys in a secure place; NOT inside

of the safe.

- To maximize security and performance of the safe,

test pin code every 6 months.

See reverse side for more information

GETTING STARTED

Remove emergency keys and other included

accessories from packaging.

KEY ACCESS

1. Remove grey key cover located on the safe to expose

key hole.

2. Use emergency key and insert into key hole, turn key

counter clockwise and turn handle clockwise.

BATTERY

Battery compartment is located on the inside of the door

safe.

1. Remove battery compartment cover.

2. Insert four AA alkaline batteries into the battery

compartment and restore battery compartment cover.

Note: Do not mix new and old batteries

PIN CODE REGISTRATION

1st Safe Default Pin Code : 159

2nd Safe Default Pin Code : 011223

1. Press “* *”, then yellow indicator light next to warning

will light up.

2. Input current user code that you want to change, and

press “#”.

3. Input your new pin code you want to change it to and

press “#”.

4. Input your new pin code one more time to confirm

registration and press “#.” Yellow light will turn off,

meaning code has been registered.

Repeat steps above to change second pin code

TESTING REGISTERED PIN CODE

With safe door open turn handle counter clockwise to

extend the bolts. Enter registered pin code and press “#”

safe should unlock. Turn handle clockwise and bolts

shall retract; if safe unlocked then registration is

complete.

Note: If safe does not unlock then pin code registration

was unsuccessful. Please start over with Pin Code

Registration.

DELETING PIN CODES / RESETTING SAFE TO

FACTORY DEFAULT MODE

Please only reset the safe if Pin Codes are lost or

forgotten.

PARTS OF THE SAFE

1. Open safe and remove screws securing the back

cover to the safe.

2. You will see a small button located on the

circuit board.

3. Press and hold small button until you see all the

lights flash and 2 quick beeps will be heard.

4. All pin codes have been resetted to factory

Default Pin Codes.

Note: 1st Safe Default Pin Code : 159

2nd Safe Default Pin Code : 011223

MOUNTING INSTRUCTIONS

The safe may be mounted to a wall. Be aware of the

load bearing. Failure to do so can result in personal

injury and/or damage to property. Use appropriate

tools when performing work and always use eye

protection.

- Do not mount the safe without anchoring to the

wall.

- Find the studs in the wall, at your desired location.

Most studs are 16 inches or 24 inches apart.

- Check the wall for concealed wires or pipes.

- Measure the location of the pre-set drill holes; mark

their exact position onto the wall ensuring that the

studs or anything else behind will not interfere.

- Drill the appropriate size holes for the anchors you

are using.

- Carefully press the anchor into the holes at

this time.

- Mount the safe by running screws from inside of the

safe and securing to anchors; ensure the safe is

mounted securely.

8/16

BC451

855 Towne Center Drive | Pomona, CA 91767

(t) 888.666.6769 | (f) 909.445.8169 | www.barska.com

Produktspecifikationer

Varumärke:	Barska
Kategori:	kassaskåp
Modell:	AX12660 Kluis
Färg på produkten:	Zwart
Förpackningens vikt:	8230 g
Förpackningens bredd:	693 mm
Djuppackning:	170 mm
Förpackningshöjd:	525 mm
Typ av förpackning:	Doos
Beeldscherm:	LED
Skärm diagonal:	27 "
Upplösning:	1920 x 1080 Pixels
Pekskärm:	Nee
Pixel densitet:	82 ppi
Original bildförhållande:	16:9
Betraktningsvinkel, horisontell:	178 °
Betraktningsvinkel, vertikal:	178 °
Skärmform:	Flat
Typiskt kontrastförhållande:	1000:1
Frekvensområde horisontellt:	30 - 83 kHz
Frekvensområde vertikalt:	50 - 76 Hz
VGA (D-Sub) port(ar):	1
Antal HDMI-portar:	1
DVI-port:	Ja
Monteringsalternativ för kabellås:	Ja
Kabellåsspårtyp:	Kensington
Inbyggda högtalare:	Nee
Strömförbrukning (i standby):	0.5 W
Certifiering:	RoHS, WEEE
Display, antal färger:	16.78 miljoen kleuren
HDCP:	Ja
Strömförbrukning (när avstängd):	0.3 W
HD typ:	Full HD
3D:	Nee
Displayteknik:	LED
Respons tid:	- ms
Pixelpitch:	0.311 x 0.311 mm
Grafikupplösningar som stöds:	1920 x 1080 (HD 1080)
VESA montering:	Ja
Panelmonteringsgränssnitt:	100 x 100 mm
DVI-D-portar:	1
Hållbarhetscertifikat:	EPEAT Gold, ENERGY STAR
Ljusstyrka (typiskt):	250 cd/m²
Bildförhållande:	16:9
Apparte H/V sync:	Ja
Sync-on-green (SOG):	Ja
RGB färgrymd:	sRGB
Kontrastförhållande (dynamisk):	20000000:1
Integrerad TV-tuner:	Nee
Inbyggd kamera:	Nee
Djup (utan bas):	51 mm
Höjd (utan bas):	370 mm
Bredd (utan bas):	625 mm
Vikt (utan bas):	4290 g
Uppfyller branschstandarder:	CE, CCC, CECP
Antal DisplayPorts:	1
Enhetsbredd (med stativ):	625 mm
Djupenhet (med stativ):	226 mm
Enhetshöjd (med stativ):	462 mm
Vikt (med stativ):	4920 g
AMD FreeSync:	Nee
NVIDIA G-SYNC:	Nee
On Screen Display (OSD):	Ja
Förvaringstemperatur:	-20 - 60 °C
Typ av panel:	IPS
Inbyggd USB-hubb:	Nee
Marknadsföringsnamn dynamiskt kontrastförhållande:	SmartContrast
Höjd, drift:	0 - 3658 m
Höjd vid förvaring:	3658 - 12192 m
EasyRead-läge:	Ja
AC-ingångsspänning:	100 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz
Strömförbrukning (typiskt):	17.3 W
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	20 - 80 procent
Tiltvinkelområde:	-5 - 25 °
LowBlue-läge:	Ja
lutningsjusteringar:	Ja