Bauknecht ESZH 3463 BR Fornuis Bruksanvisning

Bauknecht Ugn ESZH 3463 BR Fornuis

Läs gratis den bruksanvisning för Bauknecht ESZH 3463 BR Fornuis (12 sidor) i kategorin Ugn. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 3.7 stjärnor baserat på 1.5 recensioner. Har du en fråga om Bauknecht ESZH 3463 BR Fornuis eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/12

CONTENTS GB

INSTALLATION PAGE 16

ELECTRICAL CONNECTION PAGE 18

BEFORE USING THE APPLIANCES PAGE 19

PROTECTING THE ENVIRONMENT PAGE 19

PRECAUTIONS AND GENERAL

RECOMMENDATIONS PAGE 19

ENERGY SAVING TIPS PAGE 20

OVEN ACCESSORIES PAGE 21

COOKTOP ACCESSORIES PAGE 21

OVEN FUNCTIONS PAGE 22

COOKTOP FUNCTIONS PAGE 23

CLEANING THE OVEN AND ITS ACCESSORIES PAGE 23

CARE AND MAINTENANCE OF CONVENTIONAL

ELECTRIC COOKTOPS PAGE 25

CARE AND MAINTENANCE OF

THE GLASS-CERAMIC COOKTOP PAGE 25

TROUBLESHOOTING GUIDE PAGE 25

AFTER SALES SERVICE PAGE 26

DECLARATION OF CONFORMITY CE PAGE 26

Technical information for the installer

OVEN

•After removing the oven from its packaging, before

making the connections place it on the polystyrene

foam base to protect it from damage.

•Do not attempt to lift the oven by the handle.

Lift at the sides as shown in the figure (see arrow).

•Check that the appliance has not been damaged in

transit.

•Oven dimensions and kitchen unit dimensions are

shown in the figure opposite.

•Kitchen units in contact with the oven must be heat

resistant (80°C).

•If plastic laminates or cement are not sufficiently

heat-resistant, warping, bubbling or detachment of

the finish may result.

•Install the oven in the housing, lifting it at the sides,

taking care not to trap the wires of the electrical

supply cable.

•For correct ventilation, follow the ventilation

opening directions shown in the figure

(500 x 80 mm min). An additional opening of 5 mm

is required between the oven top rim and the

cooktop lower rim: this opening must not be closed

by strips or housing crosspieces.

•During oven installation, care must be taken to

ensure that the sides are not touching the front

edges of the housing or adjacent drawers and

doors (see picture).

•Carry out the electrical connections between

cooktop and oven (see “Electrical connection”).

•Secure the oven to the kitchen unit with screws (A)

as shown.

INSTALLATION

No Contacts

Cooktop

• The cooktop must be set into a worktop

between 20 mm and 50 mm thick.

There must be nothing between the cooktop

and the oven (cross rails, brackets, etc.).

• If the cooktop is to be installed next to a

column unit, leave a distance of at least 100

mm from the edge of the cooktop to the side of

the column unit.

•Cut an opening in the worktop of the dimensions

shown in the Product Description Sheet supplied

separately.

•If not already present, fit the supplied seal to the

cooktop flange after cleaning the contact area as

shown in the top figure.

Cooktop with electric hotplates

• If the worktop is made of wood, fit the supplied

clips.

1. Position the 4 spring clips (B) and fit them in their

locations on the underside of the cooktop.

2. Fit the cooktop into the worktop.

• If the worktop is made of marble, plastic,

ceramics, natural stone, etc., the cooktop

must be secured with brackets (C) code

4819 310 18528 (to be requested from After Sales

Service).

1. Position the brackets over the holes and secure

them with the supplied screws.

2. Fit the cooktop into the worktop.

Glass-ceramic cooktop

N.B.: Remove the protective film before installing the

cooktop.

• If the worktop is made of wood, use the supplied

spring clips and screws.

1. Position the 4 clips (D) as shown and at the

specified dimensions.

2. Secure the clips using screws (E).

3. Fit the cooktop into the worktop.

• If the worktop is made of marble, plastic,

ceramics, natural stone, etc., the cooktop must

be secured with brackets (F) code 4819 404 78697

(to be requested from After Sales Service).

1. Fit the cooktop into the worktop.

2. Position the 4 brackets (F) as shown in the figure,

in accordance with the thickness of the worktop.

3. Fix the 4 screws (G) in holes (H).

INSTALLATION

Produktspecifikationer

Varumärke:	Bauknecht
Kategori:	Ugn
Modell:	ESZH 3463 BR Fornuis
Typ av operation:	Touch
Färg på produkten:	Grijs
Inbyggd display:	Nee
Vikt:	19000 g
Bredd:	790 mm
Djup:	499 mm
Höjd:	- mm
Nettoskatt:	263 W
Sladdlängd:	1.3 m
Ljudnivå:	56 dB
Energie-efficiëntieklasse:	A
Årlig-energiförbrukning:	46.9 kWu
Snäll:	Muurmontage
Motoreffekt:	260 W
Avgasanslutningsdiameter:	150 mm
Motor ingår:	Ja
Antal motorer:	1
Husmaterial:	Glass, Stainless steel
Maximal utsugskapacitet:	680 m³/uur
Extraktionsmetod:	Afvoerend/recirculerend
Vätskedynamisk effektivitetsklass:	A
Ljuseffektivitetsklass:	A
Fettfilter effektivitetsklass:	C
Ljudnivå (låg hastighet):	48 dB
Minsta avstånd från elektrisk häll:	450 mm
Minsta avstånd från gasspis:	600 mm
Antal lampor:	2 gloeilamp(en)
Typ lampa:	LED
Soort vetfilter:	Aluminium
Tvättbart filter:	Ja
Höjd (min):	928 mm
Höjd (max):	1258 mm
Ljudnivå (hög hastighet:	56 dB
Maximal återcirkulationskapacitet:	570 m³/uur
Avtagbart filter:	Ja
Antal filter:	1 stuk(s)
Antal hastigheter:	3
Nuvarande:	10 A
Intensivt läge:	Ja
Ljudnivå (intensiv hastighet):	65 dB
Avgasplats:	Boven
Filter som tål maskindisk:	Ja
Höjd utan skorsten:	452 mm
Backventil:	Ja
Certifiering:	CE, VDE
AC-ingångsspänning:	220 - 240 V
AC-ingångsfrekvens:	50 - 60 Hz