BDI Sequel 6006A Bruksanvisning

BDI ej kategoriserat Sequel 6006A

Läs gratis den bruksanvisning för BDI Sequel 6006A (2 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 1.5 recensioner. Har du en fråga om BDI Sequel 6006A eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/2

B - 5/32” x 12mm

Phillips Screw x 16

Seque l

6006 CPU Cabinet

a s s e m b l y i n s t r U C t i o n s

bdiUsa bdiUsa.Com CUstomerserviCe@ .Com

Your Sequel Home Office Furniture is engineered for easy assembly.

Carefully follow this procedure to prevent any damage.

Placement and Maintenance

Sequel Home Office Furniture is designed for indoor use on level floors.

Clean steel parts and wood veneer with a moist cloth.

Step 1

Unpack and Identify

Unpack and identify the components at left. Note that some components

are shipped inside the cabinet. The assembly workspace should be a non-

marring surface such as carpet. A Phillips Screwdriver will be needed for

assembly. For missing hardware pieces, please contact BDI Customer

Service at customerservice@bdiusa.com. For all other concerns, please

contact your BDI Retailer.

Step 2

Install Casters

Carefully position on its top surface so that bottom CPU Cabinet (A)

surface is up, then attach a and Brake Caster (C) Rear Caster (D) at

each of the four (4) exposed installation plates using 5/32” x 12mm

Phillips Screw (B) and a Phillips Screwdriver.

Component List

D - Rear Caster x 2

C - Brake Caster x 2

E - Back Panel x 1

A - CPU Cabine t x 1

‘Sequel’ is a trademark of Becker Designed, Inc.

Made in Taiwan. 6006REV121509v2

FRONT

B x 8

C x 2

D x 2

600

6005

6006

6007

assembly instrUCtions

bdiUsa bdiUsa.Com CUstomerserviCe@ .Com

Reverse Door-Swing (if desired)

Sequel features a reversible door assembly so that

you can open either from the left or the right.

To reverse the door’s orientation,

Remove the Door by actuating both of 1.

its quick-release hinges; carefully place the

detached Door aside.

Using a Philips head screwdriver, remove 2.

both Hinge Plates from the interior wall of the

cabinet by loosening the screws holding it in

place.

Install both Hinge Plates to the opposite 3.

interior wall at the pre-determined locations.

Re-install the Door by connecting each Door 4.

Hinge to the relocated Hinge Plates.

Adjust Door Hinges (if needed)

If the cabinet’s door appears out of alignment, this can be corrected with minor adjustment to the European

hinges on each door.

Because these hinges are infinitely adjustable, adjusting one hinge element can sometimes cause the need for

adjustments to other elements. But with a few adjustments, you can modify the orientation of the cabinet door

to make sure that it hangs evenly.

Use a Phillips screwdriver to adjust Sequel’s door

hinges:

By adjusting

• Screw 1, the door will move

LEFT or RIGHT within the frame. Make minor

adjustments at both top and bottom hinges for

best results.

By adjusting

• Screw(s) 2, the door will move

UP or DOWN within the frame (the top and

bottom hinges must be adjusted the same

degree).

NOTE: Loosen Screws 2 one complete turn,

raise or lower door, then hold in position

while tightening Screws 2 (on both hinges).

By adjusting

• Screw 3 the entire door will

move IN or OUT, opening or closing the gap

between the door frame and cabinet. (This

screw rarely needs adjustment.)

Step 3

Install Back Panel

Install to the backside of the cabinet by Back Panel (E)

first inserting the panel into the cabinet then raising it up

and down in to the grooves.

Produktspecifikationer

Varumärke:	BDI
Kategori:	ej kategoriserat
Modell:	Sequel 6006A
Vikt:	16000 g
Bredd:	330 mm
Djup:	590 mm
Höjd:	640 mm
Förpackningens bredd:	690 mm
Antal lådor:	1 lådor
Ramfärg:	Espresso
Låddjup:	630 mm
Styrhjul:	Ja
Ram material:	Trä