Bebob V200micro Bruksanvisning


Läs gratis den bruksanvisning för Bebob V200micro (5 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 3.9 stjärnor baserat på 2 recensioner. Har du en fråga om Bebob V200micro eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/5
bebob factory GmbH Höglwörtherstr. 350 – D-81379 München Tel.: +49 89 27818282
www.bebob.de
April 2020
Features
A high capacity battery which is compact and lightweight. Direct fitting to a camera via V-
Mount.
Five-step LED power indicator (100% - 80% - 60% - 40% - 20%).
Safety instructions
Only for professional use! Keep batteries out of reach of children and personnel that has
not been instructed in the use of high capacity Lithium-ion batteries!
Use only with recommended charger.
Keep the battery dry and do not immerse in water.
Never open the case of the battery.
Do not expose to temperature over 60°C.
Do not expose the battery to fire! May explode if thrown into fire!
Maximum Load 16.0A.
Do not put the battery on a device when the red charging LED flashes.
Handle with care! Do not throw! Do not drop!
V200micro rechargeable li-ion Battery
User Manual
WE STRONGLY RECOMMEND THAT YOU
READ THIS INSTRUCTION BEFORE USING
YOUR BEBOB V200MICRO BATTERY!
PLEASE KEEP THIS MANUAL FOR FUTURE
REFERENCE
bebob factory GmbH Höglwörtherstr. 350 – D-81379 München Tel.: +49 89 27818282
www.bebob.de
April 2020
Charging
Never leave batteries unattended while charging
Wait 30 Minutes after discharge before you put the battery on a charger.
The bebob V200micro battery can be charged with an external bebob charger (or
equivalent) with Lithium-ion (Li-ion) charging ability.
Approximate charge time may vary depending on charger and temperature.
bebob V200micro can be charged in ambient temperature for optimum performance at
10°C - 30°C.
bebob V200micro batteries can be recharged in any charge condition.
Discharging
Maximum load is 16.0A. When using the battery with video or lighting equipment, power
consumption of the equipment must be 16.0A or below. For the protection of the battery, a
load of 16.0A or over may activate the internal protection circuit and stop supply of power.
In this case the status led will turn red.
The battery can be used in ambient temperature of - 20°C - + 55°C.
Camera Data Communication
Blue leds: Arri/Sony Data Protocol
Red leds: Red Data Protocol
To switch between both status, press the Check button for 5s
Status led
Status led lighting Green: Full Capacity over 70% of New
Status led lighting Yellow: Full Capacity between 50% and 70% of New
Status led lighting Red: Full Capacity under 50% of New
Flash Light
To switch On/Off press the Check Button Twice


Produktspecifikationer

Varumärke: Bebob
Kategori: ej kategoriserat
Modell: V200micro

Behöver du hjälp?

Om du behöver hjälp med Bebob V200micro ställ en fråga nedan och andra användare kommer att svara dig