Behringer EQ700 Bruksanvisning


Läs gratis den bruksanvisning för Behringer EQ700 (23 sidor) i kategorin Mixerkonsol. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 7.5 recensioner. Har du en fråga om Behringer EQ700 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/23
Thank you for showing your condence in us by purchasing the Behringer
GRAPHIC EQUALIZER EQ700. This high-quality stompbox is specically
designed to provide complete tone control and eliminate unwanted
feedback. It allows 7-band sound shaping and feedback elimination from
100 Hz to 6.4 kHz with a powerful 15 dB boost/cut per band.
1. Controls
(1) The 7-band EQ faders allow to boosting/cutting single
frequency ranges from
100 Hz to 6.4 kHz at ±15 dB.
(2) The LEVEL fader adjusts the output level. It can be used to
achieve eective volume “boost” or “cut.”
(3) This LED illuminates when the EQ is activated. It also serves as a
battery level indicator.
(4) Use the footswitch to activate/deactivate the EQ.
(5) Use this ¼" TS connector to plug in the instrument cable.IN
(6) The ¼" TS connector sends the signal to your amp.OUT
Use the connection at the front of the unit to plug in a 9 V power DC IN
supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover.
To install or replace the 9 V battery, press the hinges with a ballpen and
remove the pedal cover. Be careful not to scratch the unit.
The EQ700 has no on/o switch. As soon as you insert the
jack into the in connector, the EQ700 begins running.
When not using the EQ700, remove the jack from the
in connector. This extends the life of the battery.
The is located at the bottom.SERIAL NUMBER
V 1.0
GRAPHIC EQUALIZER EQ700
Ultimate 7-Band Graphic Equalizer
(2)
(6)
(1) (3)
(5)
(4)


Produktspecifikationer

Varumärke: Behringer
Kategori: Mixerkonsol
Modell: EQ700

Behöver du hjälp?

Om du behöver hjälp med Behringer EQ700 ställ en fråga nedan och andra användare kommer att svara dig