Behringer Heavy Distortion HD300 Bruksanvisning

Behringer Gitarr Heavy Distortion HD300

Läs gratis den bruksanvisning för Behringer Heavy Distortion HD300 (23 sidor) i kategorin Gitarr. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.9 stjärnor baserat på 9 recensioner. Har du en fråga om Behringer Heavy Distortion HD300 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/23
HEAVY DISTORTION HD300
Heavy Metal Distortion Eects Pedal
Thank you for showing your condence in us by purchasing the
Behringer HEAVY DISTORTION HD300. This high-quality eects
pedal enables you to produce super thick, tube-like distortion plus
endless sustain. Thanks to its high-performance features you can
achieve the typical hard rock or heavy metal distortion sounds, when
playing over a clean amp channel.
1. Controls
(1) The LEVEL control adjusts the output level.
(2) The control allows you to shape your overall sound.TONE
(3) The control allows you to boost/cut the low-frequency BOTTOM
range.
(4) The DIST(ortion) control adjusts the amount of distortion.
(5) The control adjusts the gain for more extreme GAIN BOOST
distortion sounds.
(6) The ON/BATT LED illuminates when the eect is activated. It also
serves as a battery level indicator.
(7) Use the footswitch to activate/deactivate the eect.
(8) Use this ¼" TS connector to plug in the instrument cable. IN
(9) The ¼" TS connector sends the signal to your amp.OUT
Use the connection to plug in a 9 V power supply (not included). DC IN
The is located underneath the pedal cover. BATTERY COMPARTMENT
To install or replace the 9 V battery (not included), press the hinges with
a ballpoint pen and remove the pedal cover. Be careful not to scratch
the unit.
V1.0
(1)
(3)
(9)
(5)
(6)
(8)
(7)
(2)
(4)


Produktspecifikationer

Varumärke: Behringer
Kategori: Gitarr
Modell: Heavy Distortion HD300

Behöver du hjälp?

Om du behöver hjälp med Behringer Heavy Distortion HD300 ställ en fråga nedan och andra användare kommer att svara dig