Behringer Ultra Metal UM300 Bruksanvisning

Läs gratis den bruksanvisning för Behringer Ultra Metal UM300 (24 sidor) i kategorin Gitarr. Guiden har ansetts hjälpsam av 17 personer och har ett genomsnittsbetyg på 4.2 stjärnor baserat på 8 recensioner. Har du en fråga om Behringer Ultra Metal UM300 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Thank you for showing your condence in us by purchasing the

Behringer ULTRA METAL UM300. This high-quality eects pedal comes

with a dual-gain circuitry that enables you to produce super thick, tube-

like distortion plus endless sustain. Thanks to its high-performance

features you will achieve the most extreme and sought-after hard rock

or heavy metal distortion sounds.

1. Controls

(1) The control allows yu to boost/cut the lo-frequency range.LOW

◊

◊

◊

◊◊ Please keep in mind that extrme distortion and EQ

settings will increase nose and may induce oscillation.

(2) The two (uency) controls allow to boost/cut a dè ned MID FREQ

mid-frequency range. The upper control is used to increase

or lower the mid range, the cntrol below adjusts the center

frequency of the mid range that is aected (200 Hz to 5 kHz).

(3) The LEVEL control adjusts the output level.

(4) The LED illumnates when the eect is activated. It also ON/BATT

serves as a battery leve indicator.

(5) Use the footswitch to activate/deactivate the eect.

(6) Use this ¼" TS connector to plug in the instrument cable.IN

(7) The ¼" TS connector sends the signal to your amp. OUT

Use the connection to plug in a 9 V power supply (not included). DC IN

The BATTERY COMPARTMENT is located underneath the pedal cover.

To install or replace the 9 V battery, press the hinges with a ballpen and

remove the pedal cover. Be careful not to scratch the unit.

V .01

ULTRA METAL UM300

Heavy Metal Distortion Eects Pedal

(3)

(1) (5)

(4)

(7)

(2)

(8)

(6)

(9)

Produktspecifikationer