Behringer Ultra Octaver UO300 Bruksanvisning
Behringer
Inte kategoriserad
Ultra Octaver UO300
Läs gratis den bruksanvisning för Behringer Ultra Octaver UO300 (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 14 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 7.5 recensioner. Har du en fråga om Behringer Ultra Octaver UO300 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
ULTRA OCTAVER UO300
3-Mode Octaver Eects Pedal
Thank you for showing your condence in us by purchasing the BEHRINGER ULTRA OCTAVER UO300.
This high-quality eects pedal creates a monster sound by adding two additional tones using your
guitar—one and two octaves below the original tone. Thanks to its high-performance features you’ll
get natural, clear octave sounds with constant pitch, even for staccato playing.
Octave eect is possible due to a circuitry that generates signals one or more octaves below the input signal.
1. Controls
(1) The selector allows you to optimize the eects pedal for HIGH, MID and LOW frequencies RANGE
and use instruments with dierent frequency ranges (guitar, bass guitar, keyboard, etc.)
(2) The control adjusts the level of the original input signal.DIRECT
(3) The control adjusts the level of the generated signal one octave below the original signal.OCT 1
(4) The control adjusts the level of the generated signal two octaves below the original signal. OCT 2
(5) The blue LED illuminates when the eect is activated. It also serves as a battery level indicator.ON/BATT
(6) Use the footswitch to activate/deactivate the eect.
(7) Use this ¼" TS connector to plug in the instrument cable.IN
(8) The ¼" TS connector sends the signal to your amp.OUT
Use the connection at the front of the unit to plug in a 9 V power supply (not included). DC IN
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery,
press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
◊ The UO300 has no on/o switch. As soon as you insert the jack into the in connector,
the UO300 begins running. When not using the UO300, remove the jack from the
in connector. This extends the life of the battery.
The is located at the bottom.SERIAL NUMBER
(5)
(1)
(7)
(4)
(6)
(3)(2)
(8)
Produktspecifikationer
| Varumärke: | Behringer |
| Kategori: | Inte kategoriserad |
| Modell: | Ultra Octaver UO300 |
Behöver du hjälp?
Om du behöver hjälp med Behringer Ultra Octaver UO300 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Behringer Manualer
2 April 2025
7 Januari 2025
7 Januari 2025
7 Januari 2025
7 Januari 2025
7 Januari 2025
7 Januari 2025
7 Januari 2025
7 Januari 2025
2 Januari 2025
Inte kategoriserad Manualer
- GRE
- XP-PEN
- Oben
- Fine Dine
- Airlive
- AvMap
- Pfister
- Dreamgear
- Origin Storage
- EarthQuaker Devices
- Waterstone
- Aluratek
- Newport Brass
- BabyDan
- GVM
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025