Behringer UT300 Bruksanvisning

Läs gratis den bruksanvisning för Behringer UT300 (30 sidor) i kategorin ej kategoriserat. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 9 recensioner. Har du en fråga om Behringer UT300 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Thank you for showing your condence in us by purchasing the

Behringer ULTRA TREMOLO UT300. This high-quality eects pedal

is designed to provide guitarists easy-to-use tremolo eect styles.

Thanks to its high-performance features you get the classic, warm and

mind-bending tremolo eects of vintage ‘60s amps.

The tremolo eect is achieved by periodic modulation of the input signal

level. This results in a continuous change from low to high level that has

a quivering, tremulous sound character.

1. Controls

(1) The RATE control adjusts the speed of the tremolo eect.

(2) The DEPTH control adjusts the intensity of the eect.

(3) The WAVE control alters the LFO waveform that modulates the

input signal from triangle to square. This way you can achieve

practically any tremolo sound, from classic to radical styles.

(4) The ON/BATT LED illuminates when the eect is activated. It also

serves as a battery level indicator.

(5) Use the footswitch to activate/deactivate the eect.

(6) Use this ¼" TS IN connector to plug in the instrument cable.

(7) The ¼" TS OUT connector sends the signal to your amp.

Use the DC IN connection at the front of the unit to plug in a 9 V power

supply (not included).

The BATTERY COMPARTMENT is located underneath the pedal cover.

To install or replace the 9 V battery, press the hinges with a ballpen and

remove the pedal cover. Be careful not to scratch the unit.

V 1.0

ULTRA TREMOLO UT300

Classic Tremolo Eects Pedal

(4)

(1)

(7)

(6)

(2)

(5)

(3)

Produktspecifikationer