Behringer Vintage Phaser VP1 Bruksanvisning
Behringer
hi-fi system
Vintage Phaser VP1
Läs gratis den bruksanvisning för Behringer Vintage Phaser VP1 (2 sidor) i kategorin hi-fi system. Guiden har ansetts hjälpsam av 31 personer och har ett genomsnittsbetyg på 3.6 stjärnor baserat på 16 recensioner. Har du en fråga om Behringer Vintage Phaser VP1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/2
VINTAGE PHASER VP1
Thank you for showing your confidence in us by purchasing the BEHRINGER VINTAGE PHASER VP1. This
high-quality effect pedal is designed for all musicians who want to their sound some extra pep. Thanks to its
high-performance features you get authentic and classic three dimensional phase shiftingfrom rapid rotary speaker
to impressive jet plane effects.
With the phaser, a second, phase-shifted signal is added to the original audio signal. The resulting sound is thicker
and above all livelier. This effect is often used for guitar sounds and keyboards. In the 70s, it was also extensively
used for other instruments like electric pianos.
1. CONTROLS
Top view
The control determines the speed of the phase shifting effect.RATE
The TONE switch lets you chose between negative feedback (lower position) or positive feedback (upper
position) phaser modes. Negative feedback means that the delayed signal is inverted before it is fed back to the
original signal. In positive feedback mode the delayed signal is not inverted. In this case the effect has a more
detuned character enabling to use the unit as vibrato effect for example.
The STATUS LED illuminates when the effect is activated.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS INPUT connector to plug in the instrument cable.
The 1/4" TS OUTPUT connector sends the signal to your amp.
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located on the bottom. Open the lid to install or replace the 9 V battery.
+The VP1 has no on/off switch. As soon as you insert the jack into the IN connector, the VP1 begins
running. When not using the VP1, remove the jack from the IN connector. This extends the life of
the battery.
The SERIAL NUMBER is located on the bottom.
2. WARRANTY
For our current warranty terms, please refer to our website at http://www.behringer.com.
Produktspecifikationer
| Varumärke: | Behringer |
| Kategori: | hi-fi system |
| Modell: | Vintage Phaser VP1 |
Behöver du hjälp?
Om du behöver hjälp med Behringer Vintage Phaser VP1 ställ en fråga nedan och andra användare kommer att svara dig
hi-fi system Behringer Manualer
13 Juni 2025
3 Oktober 2024
30 September 2024
18 September 2024
16 September 2024
3 September 2024
2 September 2024
24 Augusti 2024
23 Augusti 2024
23 Augusti 2024
hi-fi system Manualer
- Razer
- SSV Works
- Power Dynamics
- Audiofrog
- Planet Audio
- Electro-Voice
- SuperSonic
- Nec
- PowerBass
- Konig & Meyer
- House Of Marley
- OSD Audio
- Audizio
- Rolls
- Tascam
Nyaste hi-fi system Manualer
20 Oktober 2025
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
18 Oktober 2025
17 Oktober 2025
16 Oktober 2025
16 Oktober 2025