Bellini BO604B(-F) Bruksanvisning

Bellini Ugn BO604B(-F)

Läs nedan 📖 manual på svenska för Bellini BO604B(-F) (17 sidor) i kategorin Ugn. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/17
1
60cm Built In Oven
Installation and User manual
Content
Important Safety instructions-------------------- 2
Product description--------------------------------- 4
Installation-------------------------------------------- 7
Start using your oven------------------------------- 9
Maintenance and cleaning------------------------ 14
Warranty----------------------------------------------- 16
BO6602X-1(F)
BO610CX-1(F)
BO610CX-2(F)
BO604B(-F)
BO607B(-F)
20140403 issue10
For warranty service call 1300 373 199(Australia)
or 0508 123108(New Zealand) to connect you to
the nearest authorised service centre
2
Important Safety Instructions
This manual explains the proper installation and use of your oven, please read it carefully before
using even if you are familiar with the product. The manual should be kept in a safe place for future
reference.
General Warnings
If the supply cord is damaged, the cord must be
replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a
hazard.
This product has not been designed for any uses
other than those specified in this booklet.
This appliance must not be used as a space
heater.
In order to avoid fire, the appliance must be kept
clean and vents kept unobstructed.
Do not spray aerosols within the vicinity of the
appliance during operation.
Do not store flammable materials in or under the
appliance, e.g. aerosols.
Do not line the bottom of the oven with foil or
cookware.
Always use gloves when handling hot items inside
the oven.
Always turn the grill off immediately after use as
fat left behind may catch fire.
Do not leave the appliance unattended when
cooking. Oils and fats may catch fire due to
overheating or boiling over.
Do not put pans weighing over 15Kgs on the
opened door of the oven.
Do not use the appliance in the event of a
technical fault. Any faults must be fixed by an
appropriately qualified and authorised person.
In the event of any incident caused by a technical
fault, disconnect the power and report the fault to
the service centre to be repaired.
The rules and provisions contained in this
instruction manual should be strictly observed.
Do not allow anybody who is not familiar with the
contents of this instruction manual to operate the
appliance.
Child Safety
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they’ve been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
During use this appliance becomes hot. Care
should be taken to avoid touching hot surfaces, e.g.
oven door, heating elements.
Accessible parts will also become hot when in use.
To avoid burns and scalds children should be kept
away.
Installation, Cleaning & Servicing
The appliance must be installed only by an
authorised person in compliance with the
instructions provided. Incorrect installation may
cause harm to persons, animals or may damage
property.
Before using the appliance, ensure that all packing
materials are removed from the appliance.
In order to avoid any potential hazard, the
enclosed installation instructions must be followed.
Ensure that all specified vents, openings and air
spaces are not blocked.
The panels adjacent to the oven must be made of
heat-resistant material.
Cabinet with a veneer exterior must be assembled
with glues which can withstand temperature of up
to 120C.
3
To reduce the risk of fire, do not place or install
this unit in areas where the ventilation or
circulation ducts may become blocked. Make sure
there are at least 10mm of space between the
back of your oven and the wall. Keep some
distance on each side of your oven that you can
use that distance flowing installing instructions.
The unit's power cord must be connected to a
properly grounded and protected, 220-240V
electrical outlet. Always use ground fault
protection where required by the electrical code.
When transporting or storing the unit, keep it in a
dry location, free from dust, excessive vibration or
other factors, which may damage the unit.
Do not operate oven with a damaged cord, plug or
if the oven has malfunctioned or has been
dropped or damaged in any manner. Return
oven to authorised service facility for repair.
Only authorised personnel should carry out
servicing. (Certificate of Compliance to be
retained)
Always ensure the appliance is switched off
before cleaning or replacing parts.
Do not use steam cleaners, as this may cause
moisture build-up.
Always clean the appliance immediately after any
food spills.
THIS APPLIANCE MUST BE EARTHED.
To maintain safe operation, it is recommended
that the product be inspected every five years by
an authorised service person.
Oven
During use the appliance becomes hot. Care
should be taken to avoid touching the hot surfaces
inside the oven.
Switch the appliance off before removing the oven
light glass for globe replacement.
To avoid an accident, ensure that oven shelves
and fittings are always inserted into the appliance
in accordance with the instructions.
Do not use the door as a shelf.
Do not push down when the oven door is open.
Grill
Do not cover the grill insert with foil, as fat built up
may catch on fire.
Always keep the grill dish clean as any build up
may catch on fire.
Do not leave the grill on unattended.
To avoid fire, ensure that grill trays and fittings are
always inserted into the appliance in accordance
with the instructions.
Do not place thick portions of food under the grill.
Foods may curl, catch and ignite.
Accessible parts may become hot when grill is in
use. Children should be kept away.
Environmental Hints
Use the oven efficiently, by cooking many trays of
food at the same time.
Cook 2 trays of scones, small cakes or sausage
rolls at the same time.
Select the correct shelf location for food being
cooked.
Do not open the oven door more than necessary.
After the oven is turned off it retains heat for some
time.
This product must not be disposed together
with domestic waste. This product has to be
disposed at an authorised place for recycling
of electrical and electronic appliances.
By collecting and recycling waste, you help save natural
resources, and make sure the product is disposed in an
environmental friendly and healthy way.
4
Product Description
Model BO604B, BO604B-F Model BO607B, BO607B-F
A. Function Selection Knob
B. Oven Door Handle
C. Power Indicator Light
D. Temperature Control Knob
E. Heating Indicator Light
F. Glass Door
Model BO6602X-1, BO6602X-1F
A. Function Selection Knob
B. Minute Timer Knob
C. Oven Door Handle
D. Temperature Control Knob
E. Heating Indicator Light
F. Glass Door
A
B
C
D
F
A
B
C
D
E
F
E
5
Model BO610CX-1, BO610CX-1F Model BO610CX-2, BO610CX-2F
A. Function Selection Knob
B. Temperature Control Knob
C. Oven Door Handle
D. Electronic Control Panel
E. Glass Door
BO610CX-2, BO610CX-2F Time Control Panel
G. Function Display
I. Increase Timer Value
H. Control Buttons
J. Decrease Timer Value
OK button: to confirm setting
H
G
J
I
A
D
C
B
E
7
Installation
WARNING!
Please follow the points below when installing the appliance
Use An Authorized Person
As stated in the local municipal building codes
and other relevant statutory regulations:
Wiring connections must be in accordance with
AS/NZS 3000 Wiring Rules and any particular
conditions of the local authority.
Refer to data plate for rating information. The
data plate is positioned at the side of cavity.
A functional switch should be provided near the
appliance in an accessible position. Refer to
AS/NZS 3000 clause 4.7.1.
Wiring should be protected against mechanical
failure. Refer to AS/NZS 3000 clause 1.5.
A means of disconnection with a contact
separation of at least 3mm must be supplied in
the fixed wiring.
Disconnect the power plug of the appliance from
the power point when conducting maintenance
or repairs to the unit
This Appliance Must Be Properly Earthed
Do not lift the appliance by the door handles.
Prepare the cupboard opening to match your
appliance measurements. (See diagrams).
Slide appliance in to cabinet cavity, ensuring
supply cable is not obstructed (kinked, jammed
or twisted).
To prevent tipping or dislodging of the appliance,
secure appliance to the cabinet with 4 screws
(provided ) , through the dedicated holes in the
appliance frame.
Where the appliance is built into a cabinet, the
cabinet material must be capable of withstanding
70°C. Installation into low temperature tolerant
cabinetry (E.g. vinyl coated) may result in
deterioration of the low temperature coating by
discoloring or bubbling.
The cabinet panels to the oven must be heat
resistant. With veneered wood units, glues must
be resistant to a temperature of 100C.
If the appliance is to be installed adjacent to vinyl
wrapped surfaces, use an installation kit
available from the vinyl-wrap supplier.
GSM cannot accept responsibility for damage
caused by installation into low temperature
tolerant cabinets.
After installation, test and ensure the appliance
operates correctly before handing it over to the
customer.
CAUTION!
Where the appliance is connected via power supply
cable to a power point, the installed power point must
remain accessible after appliance installation
A dedicated power circuit is recommended for the unit
but not required. Additional electrical appliances on
the same circuit may exceed the current (amperage)
rating for that circuit. If after the installation of your
unit the circuit breaker trips or the fuse fails on a
repeated basis, then a dedicated circuit will likely be
required.
WARNING!
To avoid any potential hazard, you must
follow our instructions when you install
your appliance. Failure to install the
appliance correctly could invalidate any
warranty or liability claims and lead to
prosecution.
Install the shelf
1. Pay attention to high temperature, you may need
to wear gloves if it is hot inside.
2. Always slide shelves into the layer with stopper.

Produktspecifikationer

Varumärke: Bellini
Kategori: Ugn
Modell: BO604B(-F)
Färg på produkten: Zwart
Bredd: 119 mm
Djup: 85 mm
Höjd: 28 mm
Husmaterial: Metaal
LED-indikatorer: Activity, Link, Power
Antal Ethernet LAN (RJ-45)-portar: 5
Plug and play: Ja
Ethernet LAN, dataöverföringshastigheter: 10,100,1000 Mbit/s
Nätverksstandard: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt
Förvaringstemperatur: -30 - 70 °C
Förvaringsfuktighet: 10 - 95 procent
Ethernet-gränssnittstyp: Gigabit Ethernet
Upphängningssystem för väggen: Ja
Power over Ethernet (PoE): Ja
RJ-45 utgångsportar: 4
Maximalt avstånd: 100 m
RJ-45 ingångsportar: 1
Drifttemperatur (TT): -10 - 45 °C
Relativ luftfuktighet i drift (VV): 10 - 90 procent
Total Power over Ethernet (PoE) budget: 60 W
Kabeltyper som stöds: Cat5, Cat5e, Cat6, Cat6+, Cat6a, Cat6e, Cat7, Cat7e, Cat8, Cat8.1
Duplexsystem: Full, Half
Ström per port Power over Ethernet (PoE): 30 W
Pintilldelning & polaritet: 1/2 (-), 3/6 (+), 7/8 (-), 4/5 (+)

Behöver du hjälp?

Om du behöver hjälp med Bellini BO604B(-F) ställ en fråga nedan och andra användare kommer att svara dig




Ugn Bellini Manualer

Ugn Manualer

Nyaste Ugn Manualer