Bellman BE1443 Bruksanvisning
Läs gratis den bruksanvisning för Bellman BE1443 (16 sidor) i kategorin Säkerhet. Guiden har ansetts hjälpsam av 8 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 4.5 recensioner. Har du en fråga om Bellman BE1443 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/16
N3583
US IPNMO01BERXT2 IC 66P3A-BERXT2
Flash Receiver
Model BE1442
input 7.5V 1500mA
For indoor use only
Made in the PRC
Flash Receiver
BE1442/1443
C
M
Y
CM
MY
CY
CMY
K
front-fold-5.pdf 1 10/29/2012 3:03:54 PM
1
Flash Receiver
BE1441
1
2
4 5 6
7
8
9
10
16
12
3
17
C
M
Y
CM
MY
CY
CMY
K
front-fold-6.pdf 1 2013/11/27 11:41:46
2
Appendix - Further information
Settings
No adjustments are required for normal use. The relevant descriptions are provided below,
if you wish to change a setting for some reason.
Radio key
In order to use several Bellman Visit Systems close to one another without interference,
dierent Radio Keys can be set on the dierent systems. All Bellman Visit System units are
supplied from the factory tuned to the same Radio Key, channel 0. This means that all Radio
Key Switches on the transmitters are set to the OFF position.
A Bellman Visit transmitter is also required to alter the radio key on the Bellman Visit Flash
Receiver. Proceed as follows to change the Radio Key:
Set a Bellman Visit Transmitter to the desired Radio Key by altering its Radio Key
Switch to the desired Radio Key. See the transmitter user manual for further information.
Hold down the Test Button (9) on the Bellman Visit Flash Receiver until the green
and yellow LEDs blink alternately. The Bellman Visit Flash Receiver will now be in
programming mode for about 30 seconds.
Press the Bellman Visit transmitter’s test button.
The LEDs will now blink ve times in quick succession to indicate a
successful change of radio key.
After changing the radio key, the Bellman Visit Flash Receiver will automatically return
to normal mode.
Please note: all Bellman Visit products within a system must be tuned to the same Radio
Key in order to operate as a group.
Signal pattern
A Signal Pattern is the name for the way in which a receiver in the Bellman Visit System indi-
cates activation. Changing the transmitters’ Signal Switch changes the Signal Pattern which
the receivers display when the transmitter is activated.
The following signal patterns are available for the Bellman Visit System: (Please note that
the Flash Receiver does not emit any sound):
3
GB
Produktspecifikationer
| Varumärke: | Bellman |
| Kategori: | Säkerhet |
| Modell: | BE1443 |
Behöver du hjälp?
Om du behöver hjälp med Bellman BE1443 ställ en fråga nedan och andra användare kommer att svara dig
Säkerhet Bellman Manualer
14 September 2024
13 September 2024
13 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
12 September 2024
11 September 2024
11 September 2024
Säkerhet Manualer
- Jablotron
- Trust
- Jupiter Pro
- Zmodo
- PROmax
- Fito
- Mr Safe
- Indexa
- Provision ISR
- Home Protector
- Inner Range
- I-Tel
- Blaupunkt
- Netgear
- FBII
Nyaste Säkerhet Manualer
19 Februari 2025
12 Januari 2025
7 Januari 2025
7 Januari 2025
24 Oktober 2024
22 Oktober 2024
21 Oktober 2024
20 Oktober 2024
20 Oktober 2024
Axis Camera Station S9001 Mk II Desktop Terminal Bruksanvisning
19 Oktober 2024