Bernina 1150MDA Bruksanvisning
Läs gratis den bruksanvisning för Bernina 1150MDA (62 sidor) i kategorin Symaskin. Guiden har ansetts hjälpsam av 7 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 4 recensioner. Har du en fråga om Bernina 1150MDA eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/62

Instruction Manual
Manual de instrucciones
Bedienungsanleitung
Manuel d’instructions
1150MDA

IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before
using this overlock sewing machine.
DANGER
_____To reduce the risk of electric shock:
1. The appliance should never be left unattended when plugged in.
2. Always unplug this appliance from the electric outlet immediately after using and before cleaning.
3. Always unplug before re-lamping. Replace bulb with same type rated max. 12V / 5W for model 1150MDA.
WARNING
_____To reduce the risk of burns, Þ re, electric shock, or injury to persons:
1. Do not allow this appliance to be used as a toy. Close attention is necessary when this appliance is used by or near children and
inÞ rm persons.
2. Use this appliance only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as
contained in this manual.
3. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped
into water. Return the appliance to the nearest authorized dealer or service center for examination, repair, electrical or mechanical
adjustment.
4. Never operate the appliance with any air openings blocked. Keep ventilation openings of the sewing machine and foot control free from
the accumulation of lint, dust, and loose cloth.
5. Keep Þ ngers away from all moving parts. Special care is required around the sewing machine needle and knife.
6. Always use the proper stitch plate. The wrong plate can cause the needle to break.
7. Do not use bent needles.
8. Do not pull or push fabric while stitching. It may deß ect the needle causing it to break.
9. Switch the sewing machine off ''O'' when making any adjustments in the needle area, such as threading needle, changing needle,
threading looper, or changing presser foot and the like.
10. Always unplug the machine from the electrical outlet when removing covers, when covers are opened to raise the knife or thread the
loopers, when lubricating or when making any other user servicing adjustments mentioned in the instruction manual.
11. Never drop or insert any object into any opening.
12. Do not use outdoors.
13. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
14. To disconnect, turn all controls to the off ''O'' position, then remove plug from outlet.
15. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
16. Basically, the machine should be disconnected from the electricity supply when not in use.
17. If the power cord of this appliance is damaged, it must be replaced with a special cord by your nearest authorized dealer or service center.
18. This appliance is provided with double insulation. (except USA/CAN)
Use only identical replacement parts. See instructions for servicing double insulated appliances.
SERVICING DOUBLE-INSULATED PRODUCTS
(USA and Canada version excepted)
In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-
insulated product nor should a means for grounding be added to the product. Servicing a double-insulated product requires extreme care
and knowledge of the system and should only be done by qualiÞ ed service personnel. Replacement parts for a double-insulated product
must be identical to those parts in the product. A double-insulated product is marked with the words DOUBLE INSULATION or DOUBLE IN-
SULATED.
The symbol may also be marked on the product.
BERNINA is committed to the protection of the environment. We strive to minimize the environmental impact of our products by
continuously improving product design and our technology of manufacturing. At the end of life please dispose of this product in
an environmentally responsible way according to the national directive. Do not throw away this product with your household
waste. In case of doubt, please contact your dealer.
SAVE THESE INSTRUCTIONS
This overlock sewing machine is intended for household use only.
1

NORMAS DE SEGURIDAD IMPORTANTES
Cuando se usa un aparato eléctrico deben respetarse las siguientes normas de seguridad:
PELIGRO
_____para reducir el riesgo de electrochoque:
1. No dejar nunca la máquina de punto cadeneta y cobertura sin vigilancia si ella está enchufada.
2. Después de coser y ante
s de los trabajos de mantenimiento, la máquina debe desconectarse quitando el enchufe de la red eléctrica.
3. Antes de cambiar la bombilla, desenchufar la máquina. Usar solamente bombillas de 12 voltios, 5 vatios.
ADVERTENCIA
_____para reducir el riesgo de quemaduras, fuego, electrochoque o el riesgo de
herir personas:
1. La máquina de punto cadeneta y cobertura no es ningún juguete. Tener mayor cuidado si la máquina la usan los niños o si se usa cerca
de ellos.
2. Usar esta máquina para los Þ nes descritos en esta guía. Usar únicamente los accesorios recomendados por el fabricante.
3. No trabajar con esta máquina si el cable o el enchufe están dañados, ella no funciona bien o está estropeada, si se ha dejado caer al
suelo o dentro del agua. Llevar inmediatamente la máquina al próximo representante Bernina o al especialista correspondiente par con
trolarla y/o arreglarla.
4. No bloquear las aperturas de refrigeración durante el uso de la máquina. Mantener estas aperturas abiertas, sin residuos o restos de
ropa.
5. No acercar nunca los dedos a las partes móviles, sobre todo cerca de la aguja.
6. Usar siempre una placa-aguja original. Una placa-aguja falsa puede romper la aguja.
7. No usar agujas torcidas.
8. Durante la costura, ni tirar de la ropa ni empujarla. Esto podría romper la aguja.
9. Las manipulaciones en la zona de la aguja, por ejemplo, enhebrar, cambiar la aguja o un pie prensatelas, etc. siempre deben hacerse
con el interruptor principal a "O".
10. Antes de los trabajos de mantenimiento descritos en la guía, como p.ej. limpieza, enhebrado de la lanzadera, cambio de bombillas, etc.
debe desconectarse la máquina quitando el enchufe de la red eléctrica.
11. No meter ningunos objetos dentro de las aperturas de la máquina.
12. No usar la máquina al aire libre.
13. No usar la máquina en sitios donde se utilizan productos con gas propelentes (sprays) u oxígeno.
14. Para desconectar la máquina, colocar el interruptor principal a "O" y quitar el enchufe de la red.
15. Desenchufar de la red tirando siempre del enchufe y no del cable.
16. Generalmente, cuando la máquina no se usa tiene que desconectarse quitando el enchufe de la red eléctrica.
17. Si el cable eléctrico está dañado, entonces hay que cambiarlo por uno nuevo original. Consultar el representante más cercano o el
centro de servicio para que lo cambien.
MANTENIMIENTO DE PRODUCTOS DE ISOLACION
DOBLE
Un producto de aislamiento doble tiene dos unidades de aislamiento en vez de una toma de tierra. En un producto de aislamiento doble no
hay una toma de tierra, y tampoco debe incluirse una. El mantenimiento de un producto de aislamiento doble requiere mucha atención y
conocimiento del sistema. Pos eso sólo un especialista puede hacer este trabajo de mantenimiento. Usar únicamente piezas de recambio
originales. Un producto de aislamiento doble está marcado con: "Doble isolación" o "Isolación doble".
El símbolo puede también indicar semejante producto.
BERNINA se siente responsable de proteger el medio ambiente. Nos esforzamos en aumentar la compatibilidad de nuestros
productos mejorándolos continuamente respecto diseño y tecnología de producción. Si no necesita más el producto, elimínelo
conforme las directivas nacionales del medio ambiente. No tire el producto junto con los desperdicios domésticos. En caso de
duda, póngase en contacto con su representante.
GUARDE BIEN ESTAS NORMAS DE SEGURIDAD
Esta máquina de punto cadeneta y cobertura está solamente destinada para el uso doméstico.
2
Produktspecifikationer
Varumärke: | Bernina |
Kategori: | Symaskin |
Modell: | 1150MDA |
Behöver du hjälp?
Om du behöver hjälp med Bernina 1150MDA ställ en fråga nedan och andra användare kommer att svara dig
Symaskin Bernina Manualer
14 Augusti 2025
13 Augusti 2025
13 Augusti 2025
13 Augusti 2025
13 Augusti 2025
12 Augusti 2025
12 Augusti 2025
12 Augusti 2025
12 Augusti 2025
12 Augusti 2025
Symaskin Manualer
- Janome
- Jata
- Kunft
- Juki
- Guzzanti
- Baby Lock
- Singer
- Husqvarna
- Yamata
- SteamMax
- Sinojo
- Lifetec
- Essentiel B
- Kenmore
- Lervia
Nyaste Symaskin Manualer
17 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025
16 September 2025