BeSafe iZi Plus X1 Bruksanvisning

BeSafe Bilbarnstol iZi Plus X1

Läs gratis den bruksanvisning för BeSafe iZi Plus X1 (8 sidor) i kategorin Bilbarnstol. Guiden har ansetts hjälpsam av 26 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 13.5 recensioner. Har du en fråga om BeSafe iZi Plus X1 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/8
REARWARD-FACING
USER MANUAL
0+/1/2 0-25 kg 6m-5y
ECE R44 04
GROUP WEIGHT AGE
28
19
21
22
32
33
34
36
40
31
20
1
7
10
8
9
14
3
2
4
6
12
11
13
5
15
17
18
39
41
37
38
26 27
23
29
35
16
24 25
2x
2x
2x
30
2x
2x
8 9
! Vital information
It is NOT ALLOWED to mount the seat in a front
passenger seat WITH AN ACTIVATED AIRBAG.
iZi Plus can be installed only rearward-facing with
a 3-point car belt, approved to UN/ECE Regulation No. 16 or
other equivalent standards.
iZi Plus is approved in groups 0+, 1 and 2, rearward-facing
from 0-25 kg.
Read the car list to nd out whether your car model is
approved to use the seat. Check www.besafe.com for the
most updated carlist.
The harness straps must always be locked when the child is in
the seat.
The harness straps must be tightened without slack and not
twisted. You should not be able to get more than one nger
between the harness and your baby (2cm).
The cover of the shoulder strap contains magnets. Magnets can
inuence electronic equipment such as pacemakers.
The oor support must always be used. Make sure that the oor
support is fully pushed down.
We recommend that this seat is used only for children who can
sit upright, so not younger than 6 months.
For children under 1 year and/or under 10 kg weight, we
recommend that the most reclined sitting position and the body
hugger and seat cushion are used.
Remove the baby cushion (extra available accessory) when the
child is older then 1 year.
Remove the body hugger when the child is older then 2 years.
When the child weighs over 25 kg or the shoulders are higher
then the bottom side of the head rest, the child must change to
a group 2/3 seat.
After an accident, the seat must be replaced. Although it may
look undamaged, if you were to have another accident, the seat
may not be able to protect your child as well as it should.
Prevent the seat from becoming trapped or weighed down by
luggage, seats and/or slamming doors.
Before every use, make sure the harness is not damaged
or twisted.
Do not use the seat if any components are broken or missing.
If in doubt, consult either the child restraint manufacturer or
the retailer.
28
19
21
22
32
33
34
36
40
31
20
1
7
10
8
9
14
3
2
4
6
12
11
13
5
15
17
18
39
41
37
38
26 27
23
29
35
16
24 25
2x
2x
2x
30
2x
2x
Thank you for choosing BeSafe iZi Plus
Contents
BeSafe has developed this seat with much care, to protect
your child during the rst phase of her or his life.
Vital information
Rearward-facing belt installation
Removing the seat
Positioning the child
Sleeping position
Removing and retting the cover
Cleaning instructions
Warning: potential misuse
Important advice
Guarantee
Point of sale information
! It is important that you read this user manual BEFORE
installing your seat. Incorrect installation could endanger
your child.
8
10
14
15
15
16
16
17
17
19
19
10 11
1. When mounting in the front seat of the vehicle, adjust the back
rest of this vehicle seat in an upright position. When mounting
in the back seat of the vehicle, push the front seat of the
vehicle forward as much as possible.
2. Install the front brace by sliding the two pins in the oval tube
under the front side of the seat. Move the front brace inwards
with the ratchet. The ratchet is used to adjust the front brace
in both directions. Slide the knobs (see red circle) on the
ratchet up or down to change direction. (18)
3. Fold down the oor support before you install the seat in your
vehicle. (19)
4. Check if the oor support is folded totally downwards as
shown on the green sign at the topside. (19)
5. Before you can install the seat in the vehicle, you have to
mount 2 anchor belts which will be connected with the
connectors at the backside of the child seat. The anchor belts
have to be connected with the vehicle.
! It is NOT ALLOWED to mount the seat in a front
passenger seat WITH AN ACTIVATED AIRBAG.
Crucial parts
1. Adjustable head rest
2. Shoulder straps (2x)
3. Body hugger
4. Harness buckle
5. Central adjuster
6. Reclining lever
7. Front brace
8. Belt guiding hook
9. Ratchet for front brace
10. Belt guiding horns (2x)
11. Floor support
12. Height adjuster oor support
13. Floor support height indicator
14. Anchor belt (2x)
15. Release handle head rest
16. Floor support position indicator
17. Connector for anchor belt (2x)
Rearward-facing belt installation
Insert the belt loop through the gap between the seat cushion
and the seat back on the front seat of the vehicle. Then bring the
locking device through the belt loop and tighten. (20)
If these methods do not work in your car refer to
www.besafe.com for alternatives.
Installation on the back seat
Join the 2 anchor belts together to make a single belt. Put the
lock of belt 2 through the loop of the belt 1 and then through the
loop of belt 2. Pull it rmly. (21)
Put the middle part of the anchor belt over the inner part of the
vehicle seat. Bring the two ends of the anchor belt under the
front seat of the vehicle and bring them upwards to the seat.
(22)
Installation on the front seat

Produktspecifikationer

Varumärke: BeSafe
Kategori: Bilbarnstol
Modell: iZi Plus X1

Behöver du hjälp?

Om du behöver hjälp med BeSafe iZi Plus X1 ställ en fråga nedan och andra användare kommer att svara dig