Beverage-Air BB48HC-1-F-PT-B-27 Bruksanvisning

Beverage-Air kylskåp BB48HC-1-F-PT-B-27

Läs nedan 📖 manual på svenska för Beverage-Air BB48HC-1-F-PT-B-27 (36 sidor) i kategorin kylskåp. Denna guide var användbar för 7 personer och betygsatt med 3.8 stjärnor i genomsnitt av 4 användare

Sida 1/36
INSTALLATION AND OPERATING INSTRUCTIONS
for all Hydrocarbon
BB Back Bar Refrigerator Models
3779 CHAMPION BLVD, WINSTON-SALEM, NC 27105
Phone: (888) 845-9800 | Fax: (800) 253-5168 | Web: beverage-air.com
809-183a Rev C. 07/27/2022 SEE BACK COVER FOR
WARRANTY REGISTRATION
User Manual for BB Refrigerators Beverage-Air
Rev. 07/22Beverage-Air2
WELCOME
Safety 3 ........................................................................................................................................................................
Important Information 4 ..........................................................................................................................................
Product Information 7 ...............................................................................................................................................
Clearance and Placement 8 .....................................................................................................................................
Unpacking and Set Up 9 ...........................................................................................................................................
Shelf Installation 10 ....................................................................................................................................................
Sliding Doors, assembly 11 .......................................................................................................................................
Keg installation 13 ......................................................................................................................................................
Electrical 14 ..................................................................................................................................................................
Using The Unit - Danfoss Controller (Excluding the BB24HC models) 15 .....................................................
Sequence of Operations Refrigerator(Excluding the BB24HC models) 16 ..........................................
Using The Unit - Eliwell Controller (Excluding the BB24HC models) 20 .......................................................
Sequence of Operations Refrigerator(Excluding the BB24HC models) 21 ..........................................
Using The BB24HC ...............................................................................................................................................24
Sequence of Operations BB24HC............................................................................................................25
Cleaning and Maintenance 26 ................................................................................................................................
Condenser Cleaning 27 ..............................................................................................................................................
Methods For Cleaning Stainless Steel..............................................................................................................28
Help 29 ..........................................................................................................................................................................
For The Service Tech - R290 30 .............................................................................................................................
For The Service Tech - Wiring Diagrams 31 ..........................................................................................................
Limited Warranty 34 .................................................................................................................................................
Limited Warranty (continued) 35 ...........................................................................................................................
Important Information
PLEASE READ THESE INSTRUCTIONS CAREFULLY
BEFORE INSTALLING OR USING, IF RECOMMENDED
PROCEDURES ARE NOT FOLLOWED, WARRANTY
CLAIMS MAY BE DENIED.
Your warranty registration information is located with
this manual. Please complete the card and submit it to
Beverage-Air within TEN days of installation. Failure
to properly register equipment may limit or void the
warranty.
Beverage-Air reserves the right to change
specications and product design without
notice. Such revisions do not entitle the buyer to
corresponding changes, improvements, additions, or
replacements for previously purchased equipment.
Thank you for purchasing a Beverage-Air cabinet. This
series has passed our strict quality control inspection and
meets the high standards set by Beverage-Air! You have
made a quality investment that with proper maintenance
will give you many years of reliable service!
Please read the following installation and maintenance
instructions before installing or using your unit. If you
have any questions, Please call our Technical Service
Department at (800) 684-1199. 8:00 AM to 5:00 PM EST.
User Manual for BB Refrigerators Beverage-Air
Rev. 07/22 Beverage-Air 3
SAFETY
This appliance has been designed with your safety in mind. It has many features to keep you from being harmed. However,
safe operation and maintenance are your responsibilities. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance..
Use: When using this unit, please:
Move it carefully. If on casters be sure the casters
do NOT run over the power cord.
Lock the casters when in use.
Seek help. This machine is heavy! Be sure to move
with enough help to avoid tipping or dropping the
cabinet.
Prevent children from playing in or on the cabinet.
Persons unable to use this product must be
prevented access.
Follow all instructions. There are many safety
labels and directions on the unit. Heed them.
Watch your ngers. There may be pinch points near
the door hinges.
Maintenance
Do NOT:
Clean a frozen evaporator with a sharp object
Clean a dirty condenser with a sharp object.
Store gasoline, kerosene or any other ammable
material near the cabinet.
Do ALWAYS
Use a Beverage-Air recommended technician certied
to repair R290 equipment.
Use ONLY Beverage-Air factory service parts. Use of
non OEM parts can be dangerous because of the design
changes needed to safely use R290.
Observe the and Caution Warning notices. They are indicators of
important safety information. Keep this manual for future reference.
Important Information to Add
Record the model number, serial number and the date of installation here for future reference. The model and serial
numbers are on the unit's serial number dataplate, which is located on the left inside wall.
Model Number
Serial Number
Date of Installation
Purchased From
CAUTION
WARNING
CAUTION
CAUTION
User Manual for BB Refrigerators Beverage-Air
Rev. 07/22Beverage-Air4
IMPORTANT INFORMATION
This unit is intended to be used in a commercial application. That includes bars and restaurants.
If installed in a residence some commercial service companies may not be able to service it on site.
The manufacturer has designed and produced this machine with the nest in materials. The manufacturer assumes no
liability for units that have been altered in any way. Alterations or part substitutions will void the warranty.
Limitations
The machine is designed for use indoors in a controlled
environment. It must be kept dry, not overheated or
subjected to excessive cold. May only be connected to
a dedicated electrical circuit. Extension cords are not
permitted.
Minimum Maximum
Voltage 103.5 126.5
Room Air Temp 60º F 100º F
Air Flow, 24 inch Models regardless of section, door count or door material.
Agency Approvals
These marks appear on the dataplate or serial tag, located
in the inside of the left wall. The dataplate also contains
the model and serial numbers as well as electrical
requirements.
User Manual for BB Refrigerators Beverage-Air
Rev. 07/22 Beverage-Air 5
Air Flow, 36 - 48 inch Models regardles of section, door count or door material.
User Manual for BB Refrigerators Beverage-Air
Rev. 07/22Beverage-Air6
Air Flow, 58 - 94 inch Models regardles of left or right grille location, section, door count or door material. Left
grille shown, right grille similar but air ows in the right front, out the back and right side.
**When side and rear clearance aren't provided, the unit will exhaust out the front.
User Manual for BB Refrigerators Beverage-Air
Rev. 07/22 Beverage-Air 7
Model Cabinet Dimensions
w x d x h (Inches)
Door
Count
Glass or
Solid Door
Full Load
Amps
Power Cord
Plug (NEMA)
Refrigerant Type /
Charge (g)
BB24HC-1 24 x 30 1/8 x 37 3/4 1 Solid 2 5-15P R-290 / 55*
BB24HC-1-G 24 x 30 1/8 x 37 3/4 1 Glass 2 5-15P R-290 / 55*
BB36HC-1 36 x 24 1/2 x 34 2 Solid 2.5 5-15P R-290 / 90*
BB36HC-1-G 36 x 24 1/2 x 34 2 Glass 2.5 5-15P R-290 / 90*
BB48HC-1 48 x 24 1/2 x 34 2 2 Solid 2.5 5-15P R-290 / 90*
BB48HC-1-GS 48 x 23 5/8 x 34 2 Sliding Glass 2.5 5-15P R-290 / 90*
BB48HC-1-PT 48 x 27 3/8 x 34 4 Solid 5-15P R-290 / 80*3.1
BB48HC-1-G-PT 48 x 27 3/8 x 34 4 Glass 5-15P R-290 / 80*3.1
BB48HC-1-GS-PT 48 x 23 5/8 x 34 4 Sliding Glass 2.5 5-15P R-290 / 80*
BB58HC-1 59 x 29 1/8 x 37 1/4 2 Solid 2.5 5-15P R-290 / 95*
BB58HC-1-G 59 x 29 1/8 x 37 1/4 2 Glass 2.5 5-15P R-290 / 95*
BB58HC-1-GS 59 x 28 1/4 x 37 1/4 2 Sliding Glass 2.5 5-15P R-290 / 95*
BB68HC-1 69 x 29 1/8 x 37 1/4 2 Solid 5.3 5-15P R-290 / 115*
BB68HC-1-G 69 x 29 1/8 x 37 1/4 2 Glass 5.3 5-15P R-290 / 115*
BB72HC-1 72 x 24 1/2 x 34 3 Solid 5-15P R-290 / 80*3.1
BB72HC-1-G 72 x 24 1/2 x 34 3 Glass 5-15P R-290 / 80*3.1
BB72HC-1-GS 72 x 23 5/8 x 34 3 Sliding Glass 5-15P R-290 / 80*3.1
BB72HC-1-PT 72 x 27 3/8 x 34 6 Solid 5-15P R-290 / 80*3.1
BB72HC-1-G-PT 72 x 27 3/8 x 34 6 Glass 5-15P R-290 / 80*3.1
BB72HC-1-GS-PT 72 x 25 3/4 x 34 6 Sliding Glass 5-15P R-290 / 80*3.1
BB78HC-1 79 x 29 1/8 x 37 1/4 3 Solid 5.5 5-15P R-290 / 115*
BB78HC-1-G 79 x 29 1/8 x 37 1/4 3 Glass 5.5 5-15P R-290 / 115*
BB94HC-1 95 x 29 1/8 x 37 1/4 3 Solid 5.5 5-15P R-290 / 115*
BB94HC-1-G 95 x 29 1/8 x 37 1/4 3 Glass 5.5 5-15P R-290 / 115*
Height includes casters.
PRODUCT INFORMATION
All models will maintain product temperature between 35.5 and 40.5 degrees F. at the factory setting of 38.
0F.
All models are 115 volts, 60 Hz AC.
ALWAYS REFERENCE YOUR EQUIPMENT DATA PLATE AMPS, REFRIGERANT AND REFRIGERANT CHARGE FOR THE
MOST UP TO DATE AND ACCURATE VALUES
There are no access valves on the refrigeration system.
*55 grams = 1.94 ounces, *80 grams = 2.82 ounces
*115 grams = 4.05 ounces, *95 grams = 3.36 ounces
User Manual for BB Refrigerators Beverage-Air
Rev. 07/22Beverage-Air8
CLEARANCE AND PLACEMENT
Placement
Consider the following when selecting a location for your Refrigerator:
Clearance:
None required at top, back or sides.
Floor Load: the oor on which the Refrigerator is located must be even and level, free from vibrations, and strong enough
to support the combined weights of the unit and maximum product load.
Ventilation: Grille area at front must be free and clear of any object or wall.
Power Outlet: The installation of this appliance requires a dedicated power outlet located within the length of the unit's
power cord and be accessible for the purpose to disconnect power.
CLEARANCE
User Manual for BB Refrigerators Beverage-Air
Rev. 07/22 Beverage-Air 9
UNPACKING AND SET UP
Carefully inspect the shipping carton for damage. This is the only time that shipping damage may be claimed. If damage is
suspected, open the carton immediately and, if there is damage, retain the carton and contact the shipper to make a claim.
Do NOT contact the manufacturer.
Uncrating
Tools Needed: ¾” box wrench, adjustable wrench, level,
at head screw driver, and box cutter.
1. Remove the cardboard top capping, all clear tape,
and all staples including those at the bottom of the
cardboard carton and skid.
2. Start from the top of the carton. Using the box cutter,
carefully make one continuous cut to the bottom of
the skid. Remove cardboard carton and discard.
Note: additional clear plastic protective wrap is applied
directly to any product with a glass door.
3. Move unit as close to nal position as possible before
removing the skid.
Note: The skid must be removed before the casters or legs
can be attached.
Do NOT tip unit on its front or sides. If tipped onto the
back, unit must not be started for 3 hours.
Skid Removal and Caster Attachment
Tip the unit forward and remove the skid.
Risk of personal injury.
Unit must be securely supported
while attaching casters or legs.
WARNING
1. Remove the shipping bolts using the ¾” box wrench
while cabinet is held in one direction. Repeat the process
while the cabinet is held in the opposite direction.
2. None of the threads on the leg or caster stem should
be visible once screwed in.
3. Tilt the cabinet in one direction approximately 8” and
block it securely with pieces of 2x4 lumber or other
suitable material.
4. Thread the stem casters or legs into the ½ -13 holes in
the bottom of the cabinet. Tighten by hand as much
as possible. Some models may already have levelers
installed. If so, then the levelers will need to rst be
removed and discarded.
5. Once the caster or leg cannot be turned any further,
use a 3/4 inch wrench to tighten the nut in between
the mounting plate and the wheel of the caster until
snug.
6. Repeat this procedure with unit secured in the
opposite direction so as to access the remaining legs/
casters/levelers.
7. If plate casters or legs are installed instead of stem
casters or legs, then repeat step 3 above and secure
the plate with either #14 AB screws, or ¼-20 screws,
depending upon which are required.
8. If levelers are employed, then repeat step 3 above and
thread the leveler in place. Then repeat step 6.
Leveling:
Cabinets must be leveled when installed. Level should be
measured on the headrail.
Failure to level your cabinet may result in door not
sealing, closing correctly, or condensed water draining not
draining properly.
For cabinets with legs, rotate the foot of the leg with an
adjustable wrench to achieve desired height for leveling.
For cabinets with casters, leveling can be achieved by
placing large washers in between the ½’ stud and the
holes located on the bottom of the case.
Do NOT loosen casters to level
the cabinet. Casters MUST be
tightly secured to cabinet for full
strength.
Install or attach any accessories that will be used
Remove any plastic covering the stainless steel.
CAUTION
User Manual for BB Refrigerators Beverage-Air
Rev. 07/22Beverage-Air10
1. Determine the proper location for the shelf clips.
The reference numbers on the pilaster can serve as a
guide to ensure all clips are properly located.
2. Insert the top tab of the shelf clip into the desired
hole of the pilaster. The retaining tab MUST be facing
up as shown.
3. Rotate the clip downwards and insert the bottom tab
into the matching hole in the pilaster. The clip may
need to be squeezed slightly during installation.
4. Install all remaining clips.
5. Install shelves onto clips with the product retention
bar facing up. Be careful not to dislodge clips during
installation.
6. Place shelves so that the retaining tab on the clip
captures the shelf as shown.
7. Conrm that the shelf is resting on ALL 4 clips and
that the clips are securely attached to the pilasters.
8. Improper shelf clip installation could cause the shelf
and / or the product on it to fall, resulting in damage
to the unit and possible bodily injury.
9. Do NOT overload the shelves. The unit is designed to
use all shelves that are supplied in an equally spaced
manner. Contact Beverage-Air customer service if
fewer shelves or a dierent conguration to ensure
shelf overloading will not occur.
SHELF INSTALLATION
User Manual for BB Refrigerators Beverage-Air
Rev. 07/22 Beverage-Air 11
SLIDING DOORS, ASSEMBLY
Leveling
1. To insure proper operation, the cabinet must be
level.
2. Level the cabinet, see page
3. Verify the level condition by putting a level on the
header (gure 2a) and side frame (gure 2b) of
the door assembly.
1. Each door can be removed for cleaning and
maintenance.
2. To remove a door, lift it up o the track and pull the
bottom of the door away from the cabinet. Upwards
pressure must be maintained (gure 3a) while pulling
the door bottom.
3. Once the bottom of the door has cleared the track, pull
the door slowly away from the self closing device as it
retracts and awy from the cabinet (gure 3b).
4. To install a door, simultainously lift and rotate the
door.
5. While lifting, insert the upper corner of the door into
the upper door track so that the torpedo is placed
against that corner of the door (gure 3c).
6. Push the self closing device with the door until the
door becomes horizontal, then pivot the door down
onto the lower frame track (gure 3d) and allow the
door to rest on the sil track.
7. Check for proper operation.
Figure 3b
Door Removal and Installation
User Manual for BB Refrigerators Beverage-Air
Rev. 07/22Beverage-Air12
ADJUSTING SPRING TENSION
1. Adjust the spring tension if the door(s) do not fully close.
2. First, remove the door that does not fully close.
3. After removal of the door, remove the spring installation
screw (gure 4a), and slide the nylon spring pillar over
one notch toward the handle side of the door (gure 4b
& 4c), so that it increases the tension in the spring.
4. Reinstall the nylon spring screw in the new location.
5. Replace the door and check for proper alignment and
operation with the new tension setting.
6. Repeat this for each door that requires adjustment.
CLEANING
Door frames should be cleaned with a solution of mild soap
and water. Do not use caustic soap or abrasive cleaners,
since these might damage the nish.
If stainless steel roller track surfaces become discolored,
scrub by rubbing along the length of the track. Do not use
steel wool.
Clean glass surfaces with a standard glass cleaning solution.
TROUBLESHOOTING
If doors do NOT operate properly, check for the following:
1. Minimum of 1/32" of CLEARANCE between the vertical
gaskets on the COLD S IDE doors and the horizontal
frame gaskets located at the header and sill of the frame
in between the doors.
2. Self-closing device (a.k.a. "Torpedo· ) is properly located
on edge of door and is not "pinched" or "bound· between
the top of the door and the frame, and that torpedo
operates smoothly.
3. Sash covers on doors are properly snapped into place
and have NOT slipped down, and are NOT dragging on
the sill track of the frame or rubbing the frame header.
4. Self-closing spring is properly attached to its nylon
retaining pillar in the frame header C-channel and is not
kinked in any way.
5. Door is sitting on its wheels, the wheels are properly
aligned on the stainless steel roller track, and the door
moves freely back and forth.
6. Door is not bowed in or out from top to bottom causing
doors to rub on frame or frame gaskets.
7. Cabinet is relatively level (within approximately 3/16" of
level across the full width of the frame).
8. Sill tracks with stainless steel roller track covers are
properly snapped into p lace and are not bowed up or
down across the width of the frame.
If installed doors do NOT close fully after above checks are
complete, then consider increasing the tension on the self-
closing spring(s) by:
1. Removing door(s) that are not closing properly.
2. Removing spring installation screw and sliding nylon
spring pillar over one notch so that it increases the
tension in the spring when it is at rest. Reinstall the
nylon spring screw in this new location.
3. Reinstall the door(s).
4. Check for proper operation of doors with increased
spring tension.
If installed doors still do NOT close fully after above checks
and adjustments, then install stronger spring(s):
1. Verify that the sill track is fully engaged (snapped) into
the channel over the sill track"s entire length.
2. Verify that the frame seals are fully seated in the frame.
If the seals are not fu lly seated, they could interfere
with the movement of the door.
3. Verify that the frame was not bowed during installation.
If the frame is bowed, contact Beverage-Air Technical
Service.
If installed doors still do NOT close fully after all of the
above checks, contact Beverage-Air Technical Service.
Figure 4c
User Manual for BB Refrigerators Beverage-Air
Rev. 07/22 Beverage-Air 13
KEG INSTALLATION
Safety First! If in doubt about how to handle the CO2 system contact your dealer/distributor
How to Install a CO2 Regulator and Replace an Empty CO2
Cylinder
1. Shut o gas pressure to dispenser by closing the Cylinder
Valve and the Shut o Valve.
2. Loosen the Adjustment Nut (counter-clockwise) and then
unscrew the Adjustment Screw (counter-clockwise) as far
out as it will go to put the regulator in the ‘O’ position.
3. Remove the regulator from the cylinder by loosening the
Gold Regulator Nut.
4. Remove the dust cap from the new cylinder and attach
the regulator to the new cylinder with the Gold Regulator
Nut. Make sure all sealing washers are in place before
connecting.
5. Open the Cylinder Valve all of the way. This is important because the cylinder valve seals in two places.
6. Screw the Adjustment Screw counterclockwise until the required pressure is reached on the Pressure Gauge.
7. Open the Shut O Valve
1. Connect the line from the pressure source to the
Female MFL Fitting using a hose clamp.
2. Align the Sanke Coupler with the lugs in the beer keg
and insert.
3. Turn the Sanke Coupler ¼ turn clockwise until tight in
the keg.
4. Rotate the Handle down 90° to assure the gas ports
in the keg are fully opened.
5. Open the pressure source
How to tap a keg with a Sanke device.

Produktspecifikationer

Varumärke: Beverage-Air
Kategori: kylskåp
Modell: BB48HC-1-F-PT-B-27

Behöver du hjälp?

Om du behöver hjälp med Beverage-Air BB48HC-1-F-PT-B-27 ställ en fråga nedan och andra användare kommer att svara dig