Black And Decker BT2504AE Bruksanvisning
Black And Decker
Sågmaskin
BT2504AE
Läs gratis den bruksanvisning för Black And Decker BT2504AE (20 sidor) i kategorin Sågmaskin. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 4.8 stjärnor baserat på 2 recensioner. Har du en fråga om Black And Decker BT2504AE eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/20
www.blackanddecke com.aur.
Australia
New Zealand
BT2504AE-XE
Fig. 1
1
3
13
14 2
9
10
11
12
456
7
8
15
Know Your Table Saw (Fig. 1).
1. Rear table extension
2. Upper blade guard
3. Left side table extension
4. Main Table
5. Rip fence
6. Right side table extension
7. Extension support
8. Handwheel handle
9. Saw blade tilt lock handle
10. No-Volt-Release (NVR) switch
11. Rip fence & mitre gauge storage
12. Mounting holes (tablesaw to stand)
13. Push-stick
14. Mitre gauge
15. Table saw stand
2
1
2
5
4
6
7
Stand Assembly (Fig. 2)
1. Use the neck bolts (1), and nuts (2) to
assemble the leg set parts.
2. Attach a leg (4) to the Upper Front support (5). Attach another
leg to the opposite end. Tighten with neck bolt (1 ) and nut (2 ).
4. Repeat this assembly for the remaining two legs, Upper Rear (3 )
5. Insert the leg pag (6) into the leg.
3. Attach Bottom Front support (7) between the legs.
6. Attach Upper Side support (8) and Bottom Side support (9)
between the legs. Tighten with neck bolt and nuts.
7. Place the leg set upright on a level service, adjust and
tighten all nuts and bolts.
and Bottom Rear support (7 ). Tighten with neck bolt and nut.
Finger tighten with neck bolt and nut.
8
9
Upper Side support (8)
Bottom Side support (9)
Upper Front support (5)
Upper Rear support (3)
3
Bottom Front and
Neck Bolts x 16 Nuts x 16
Bottom Rear support (7 )
Assemble Base Cover To Table Saw
NOTE:Your saw is supplied with the base cover unassembled.
Assemble (1) to unit (2) using the 4 screws (3) supplied in bag.
2. Tighten the 4 screws (3) before mounting onto the stand.
1. 2
1
3
3
3
3
3
Fig. 2
ENGLISH
(Original instructions)
Attach table saw unit to stand
Aligning the 4 holes (5) on table saw unit to stand.
1.
5
Secure the connection using long hex bolt, washer and nuts.
2.
Produktspecifikationer
| Varumärke: | Black And Decker |
| Kategori: | Sågmaskin |
| Modell: | BT2504AE |
Behöver du hjälp?
Om du behöver hjälp med Black And Decker BT2504AE ställ en fråga nedan och andra användare kommer att svara dig
Sågmaskin Black And Decker Manualer
14 Oktober 2024
14 Oktober 2024
8 Oktober 2024
7 Oktober 2024
29 September 2024
27 September 2024
26 September 2024
26 September 2024
24 September 2024
18 September 2024
Sågmaskin Manualer
- Stiga
- Florabest
- Łucznik
- Exakt
- Gardenline
- Backyard Pro Butcher Series
- Max Bahr
- Workzone
- MSW
- Sthor
- DeWalt
- FOM
- TAURUS Titanium
- Tanaka
- Westfalia
Nyaste Sågmaskin Manualer
3 April 2025
3 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
29 Mars 2025
29 Mars 2025