Black And Decker CD961 Bruksanvisning

Black And Decker Borrmaskin CD961

Läs gratis den bruksanvisning för Black And Decker CD961 (21 sidor) i kategorin Borrmaskin. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.0 stjärnor baserat på 3.5 recensioner. Har du en fråga om Black And Decker CD961 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/21

CD121K

CD961

www.blackanddecker.com.tr

Çevirisi orijinal talimatlardan yapılmıştır

English Page 3 (Original instructions)

Turkish Page 11

ENGLISH

1113 12

E F

ENGLISH

Intended use

Your Black & Decker drill/screwdriver has been designed for

screwdriving applications and for drilling in wood, metal and

plastics. This tool is intended for consumer use only.

Safety instructions

General power tool safety warnings

Warning! Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions listed below may result in electric

shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference.

The term „power tool“ in all of the warnings listed below

refers to your mains operated (corded) power tool or battery

operated (cordless) power tool.

1. Work area safety

a. Cluttered or dark Keep work area clean and well lit.

areas invite accidents.

b. Do not operate power tools in explosive

atmospheres, such as in the presence of ﬂammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c. Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose

control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodiﬁed plugs and matching outlets will reduce risk

of electric shock.

b. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

d. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving

parts. Damaged or entangled cords increase the risk of

electric shock.

e. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric

shock.

f. If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use

common sense when operating a power tool. Do not

use a power tool while you are tired or under the

inﬂuence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in

serious personal injury.

b. Use personal protective equipment. Always wear eye

protection. Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal

injuries.

c. Prevent unintentional starting. Ensure the switch is

in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your ﬁnger on the

switch or energising power tools that have the switch on

invites accidents.

d. Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal

injury.

e. Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power tool

in unexpected situations.

f. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long hair

can be caught in moving parts.

Produktspecifikationer

Varumärke:	Black And Decker
Kategori:	Borrmaskin
Modell:	CD961
Bredd:	305 mm
Djup:	225 mm
Ethernet LAN:	Ja
Typ av strömkälla:	ATX
Antal USB 2.0-portar:	6
Mikrofon, linjeingång:	Ja
Antal Ethernet LAN (RJ-45)-portar:	1
Hörlursutgångar:	1
Inkluderad programvara:	Norton Internet Security
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A:	2
Processoruttag:	Socket AM3+
Systembuss:	4.8 GT/s
Processorfabrikant:	AMD
Maximalt internminne:	32 GB
Kompatibla operativsystem:	Windows 8/7/Vista/XP
Ljudutgångskanaler:	7.1 kanalen
Ethernet-gränssnittstyp:	Gigabit Ethernet
Chipset moderkort:	AMD 970
Typ av minnesplats:	DIMM
PCI Express x1-platser:	3
PCI Express x16-platser:	1
Gränssnitt för lagringsenheter som stöds:	SATA III
PCI Express x4-platser:	1
Komponent för:	PC
Minnesspänning:	1.5 V
Typer av RAID:	0, 1,5, 10, JBOD
Antal SATA III-kontakter:	6
PCI-platser:	2
Kompatibla processorer:	AMD Phenom II Dual-Core Mobile, AMD Phenom II Quad-Core Mobile, AMD Phenom II Triple-Core Mobile, AMD Phenom II X2, AMD Phenom II X3, AMD Phenom II X4, AMD Phenom II X6, AMD Phenom II X8
Minnestyper som stöds:	DDR3-SDRAM
Moderkort chipset familj:	AMD
Moderkorts formfaktor:	ATX
Antal minnesplatser:	4
Minnesklockhastigheter som stöds:	1066,1333,1600,1866,2000 MHz
BIOS-typ:	AWARD
Anslutning för CPU-kylare:	Ja
Strömförsörjningsfläktanslutning:	Ja
Antal SATA-anslutningar:	6
USB 2.0-anslutningar:	6
Anslutning för ljudpanel på framsidan:	Ja
S/PDIF uitgang:	Ja