Black And Decker GSL360 Bruksanvisning

Black And Decker Grastrimmer GSL360

Läs nedan 📖 manual på svenska för Black And Decker GSL360 (136 sidor) i kategorin Grastrimmer. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/136

www.blackanddecker.eu

GSL200

GSL300

GSL360

GSL700

CD1

D2 E1

E2 F

ENGLISH

(Original instructions)

3. Personal safety

a. Stay alert, watch what you are doing

and use common sense when

operating a power tool. Do not use a

power tool while you are tired or

under the inuence of drugs,

alcohol or medication. A moment of

inattention while operating power tools

may result in serious personal injury.

b. Use personal protective equipment.

Always wear eye protection.

Protective equipment such as dust

mask, non-skid safety shoes, hard hat,

or hearing protection used for

appropriate conditions will reduce

personal injuries.

c. Prevent unintentional starting.

Ensure the switch is in the off-

position before connecting to power

source and/or battery pack, picking

up or carrying the tool. Carrying

power tools with your nger on the

switch or energising power tools that

have the switch on invites accidents.

d. Remove any adjusting key or

wrench before turning the power

tool on. A wrench or a key left

attached to a rotating part of the power

tool may result in personal injury.

e. Do not overreach. Keep proper

footing and balance at all times.

This enables better control of the

power tool in unexpected situations.

f. Dress properly. Do not wear loose

clothing or jewellery. Keep your

hair, clothing and gloves away from

moving parts. Loose clothes,

jewellery or long hair can be caught in

moving parts.

g. If devices are provided for the

connection of dust extraction and

collection facilities, ensure these

are connected and properly used.

Use of dust collection can reduce

dust-related hazards.

h. Do not let familiarity gained from

frequent use of tools allow you to

become complacent and ignore tool

safety principles. A careless action

can cause severe injury within a

fraction of a second.

4. Power tool use and care

a. Do not force the power tool. Use the

correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

b. Do not use the power tool if the

switch does not turn it on and off.

Any power tool that cannot be

controlled with the switch is dangerous

and must be repaired.

c. Disconnect the plug from the power

source and/or the battery pack from

the power tool before making any

adjustments, changing accessories,

or storing power tools. Such

preventive safety measures reduce the

risk of starting the power tool

accidentally.

d. Store idle power tools out of the

reach of children and do not allow

persons unfamiliar with the power

tool or these instructions to operate

ENGLISH

(Original instructions)

the power tool. Power tools are

dangerous in the hands of untrained

users.

e. Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any

other condition that may affect the

power tools operation. If damaged,

have the power tool repaired before

use. Many accidents are caused by

poorly maintained power tools.

f. Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to

bind and are easier to control.

g. Use the power tool, accessories and

tool bits etc. in accordance with

these instructions, taking into

account the working conditions and

the work to be performed. Use of the

power tool for operations different from

those intended could result in a

hazardous situation.

h. Keep handles and grasping

surfaces dry, clean and free from oil

and grease. Slippery handles and

grasing surfaces do not allow for safe

handling and control of the tool in

unexpected situations.

5. Battery tool use and care

a. Recharge only with the charger

specied by the manufacturer. A

charger that is suitable for one type of

battery pack may create a risk of re

when used with another battery pack.

b. Use power tools only with

specically designated battery

packs. Use of any other battery packs

may create a risk of injury and re.

c. When battery pack is not in use,

keep it away from other metal

objects, like paper clips, coins,

keys, nails, screws, or other small

metal objects, that can make a

connection from one terminal to

another. Shorting the battery terminals

together may cause burns or a re.

d. Under abusive conditions, liquid

may be ejected from the battery;

avoid contact. If contact

accidentally occurs, ush with

water. If liquid contacts eyes,

additionally seek medical help.

Liquid ejected from the battery may

cause irritation or burns.

e. Do not use a battery pack or tool

that is damaged or modied.

Damaged or modied batteries may

exhibit unpredictable behaviour

resulting in re, explosion or risk of

injury.

f. Do not expose a battery pack or tool

to re or excessive temperature.

Exposure to re or temperature above

130 ºC may cause explosion.

g. Follow all charging instructions and

do not charge the battery pack or

tool outside the temperature range

specied in the instructions.

Charging improperly or at

temperatures outside the specied

range may damage the battery and

increase the risk of re.

ENGLISH

(Original instructions)

6. Service

a. Have your power tool serviced by a

qualied repair person using only

identical replacement parts. This will

ensure that the safety of the power tool

is maintained.

b. Never service damaged battery

packs. Service of battery packs should

only be performed by the manufacturer

or authorised service providers.

Additional power tool safety

warnings

@ Warning! Additional safety

warnings for hedge trimmers

u Keep all parts of the body away

from the cutter blade. Do not

remove cut material or hold material

to be cut when blades are moving.

Make sure the switch is off when

clearing jammed material. A moment

of inattention while operating the

hedge trimmer may result in serious

personal injury.

u Carry the hedge trimmer by the

handle with the cutter blade

stopped. When transporting or

storing the hedge trimmer always fit

the cutting device cover. Proper

handling of the hedge trimmer will

reduce possible personal injury from

the cutter blades.

u Keep cable away from cutting area.

During operation the cable may be

hidden in shrubs and can be

accidentally cut by the blade.

u Hold the power tool by insulated

gripping surfaces only, because the

cutter blade may contact hidden

wiring. Cutter blades contacting a

"live" wire may make exposed metal

parts of the power tool "live" and could

give the operator an electric shock.

u The intended use is described in this

instruction manual. The use of any

accessory or attachment or

performance of any operation with this

tool other than those recommended in

this instruction manual may present a

risk of personal injury and/or damage

to property.

u If you have not used a hedge trimmer

before, preferably seek practical

instruction by an experienced user in

addition to studying this manual.

u Never touch the blades while the tool

is running.

u Never attempt to force the blades to

come to a standstill.

u Do not put the tool down until the

blades have come to a complete

standstill.

u Regularly check the blades for

damage and wear. Do not use the tool

when the blades are damaged.

u Take care to avoid hard objects (e.g.

metal wire, railings) when trimming.

Should you accidentally hit any such

object, immediately switch the tool off

and check for any damage.

u Should the tool start to vibrate

abnormally, immediately switch it off

and check for any damage.

ENGLISH

(Original instructions)

mains voltage corresponds to the voltage

on the rating plate.

Warning! Never attempt to replace the

charger unit with a regular mains plug.

u Use your BLACK+DECKER charger

only to charge the battery in the tool

with which it was supplied. Other

batteries could burst, causing personal

injury and damage.

u Never attempt to charge non-

rechargeable batteries.

u If the supply cord is damaged, it must

be replaced by the manufacturer or an

authorised BLACK+DECKER Service

Centre in order to avoid a hazard.

u Do not expose the charger to water.

u Do not open the charger.

u Do not probe the charger.

u The appliance/tool/battery must be

placed in a well ventilated area when

charging.

The charger is intended for

indoor use only.

Read the instruction manual

before use.

Electrical safety

Your charger is double insulated;

therefore no earth wire is required.

Always check that the mains

voltage corresponds to the voltage

on the rating plate.

u If the supply cord is damaged, it must

be replaced by the manufacturer or an

authorised BLACK+DECKER Service

Centre in order to avoid a hazard.

u Warning! Never attempt to replace the

charger unit with a regular mains plug.

Features

1. On/off switch

2. Lock-off button

3. Blade release button

4. Shear blade (GSL200/GSL360/GSL700)

5. Trim blade (GSL300/GSL360/GSL700)

6. Charging indicator

Assembly

Warning! Avoid accidentally switching the tool on during

assembly.

Fitting the wall mount to the wall (g. A & B)

The wall mount can be tted to the wall to provide a

convenient storage and charging point for the tool.

u Drive the screws in the wall through the holes in the

crevices of wall mount.

u Place the tool on the wall mount.

u Plug in the charger making sure the charging indicator (6)

lights up (fig. A).

u If required, use the two pegs (7) below the wall mount to

store the spare blade (fig. B).

Warning! Avoid damaging the power cord when mounting the

wall mount to the wall.

Removing the charger plug from the wall mount

(g. C)

The tool can be charged without using the wall mount. The

charger plug can be connected to the tool directly.

u Remove the screws from the back of the wall mount.

u Slide the back part (8) from the front part (9) to open the

wall mount.

u Remove the charger plug from the wall mount.

Fitting and removing the blade (g. D & E)

The shear blade (4) has been designed for trimming grass

and weeds. The trim blade (5) has been designed for trimming

hedges and shrubs.

u Remove the blade cover.

u Push and hold the blade release button (3) in the direction

of the arrow (fig. D1).

u Slide the blade cover (10) backward and lift off (fig. D2).

u Lower the blade onto the pins.

u While holding the blade onto the pins (fig. E1), replace the

blade cover (10) and slide it forward (fig. E2).

Produktspecifikationer

Varumärke:	Black And Decker
Kategori:	Grastrimmer
Modell:	GSL360
Färg på produkten:	Black, Stainless steel
Vikt:	12000 g
Bredd:	1300 mm
Djup:	400 mm
Höjd:	840 mm
Antal hyllor:	1 schappen
Antalet hjul:	2 wiel(en)
Material:	Stainless steel, Wood
Hjulhjul:	Ja