Black And Decker PCM355 Bruksanvisning
Black And Decker
Sågmaskin
PCM355
Läs gratis den bruksanvisning för Black And Decker PCM355 (8 sidor) i kategorin Sågmaskin. Guiden har ansetts hjälpsam av 3 personer och har ett genomsnittsbetyg på 3.8 stjärnor baserat på 2 recensioner. Har du en fråga om Black And Decker PCM355 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/8
PCM355
DIAMETER OF WORK PIECE
WIDTH OF SPACE BLOCK
SPACE BLOCK
E
F
CUT-OFF END
BLOCK
O
N
M
G
C
B
L
K
J
FH
G
E
D
I
A
E
P
FORWARD
F
I
H
U
R
J
S
T
L
X
8mm (0.3”)
V
W
Y
Q
EP
D
F
P
Q
E
FIG.1 FIG.2
FIG.3
FIG.4
FIG.8
FIG.5
FIG.7
FIG.9
FIG.6
3
ENGLISH
INTENDED USE
Your Porter-Cable chop saw has been designed for metal
cutting only. This tool is intended for consumer use only.
SAFETY INSTRUCTIONS
General power tool safety warnings
Warning! Read all safety warnings and all
instructions. Failure to follow all instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in all of the warnings listed below
refers to your mains operated (corded) power tool or battery
operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive
atmospheres. Such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c. Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric
shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.There is an increased risk of electric
shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet
conditions.Water entering a power tool will increase
the risk of electric shock.
d. Do not abuse the cord. Never use the cord for
carrying,pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
SPECIFICATION
PCM355-XE
TECHNICAL DATA
PCM355
2300W Chop Saw
POWER
VOLTAGE
FREQUENCY
NO-LOAD SPEED
MAX. DIAMETER
WEIGHT
W
V
Hz
/min
mm
kg
2300
230
50
3800
355
17.5
Damaged or entangled cords increase the risk of
electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord outdoor use reduces the risk of electric
shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
g. Recommendation for the use of a residual current
device with a rated residual current of 30 mA or
less.
3. Personal safety
a. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may
result in serious personal injury.
b. Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure the switch is
in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
e. Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices
can reduce dust related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
b. Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or
Produktspecifikationer
| Varumärke: | Black And Decker |
| Kategori: | Sågmaskin |
| Modell: | PCM355 |
Behöver du hjälp?
Om du behöver hjälp med Black And Decker PCM355 ställ en fråga nedan och andra användare kommer att svara dig
Sågmaskin Black And Decker Manualer
14 Oktober 2024
14 Oktober 2024
8 Oktober 2024
7 Oktober 2024
29 September 2024
27 September 2024
26 September 2024
26 September 2024
24 September 2024
18 September 2024
Sågmaskin Manualer
- Lux Tools
- Makita
- Meec Tools
- Budget
- Metabo
- Genesis
- Pattfield
- Clarke
- Stiga
- Rikon
- Chicago Pneumatic
- McKenzie
- Truper
- Wolfcraft
- Kompernass
Nyaste Sågmaskin Manualer
3 April 2025
3 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
29 Mars 2025
29 Mars 2025