Blade Vortex 150 Pro BNF Basic Bruksanvisning
Blade
Radiostyrda leksaker
Vortex 150 Pro BNF Basic
Läs gratis den bruksanvisning för Blade Vortex 150 Pro BNF Basic (17 sidor) i kategorin Radiostyrda leksaker. Guiden har ansetts hjälpsam av 13 personer och har ett genomsnittsbetyg på 4.3 stjärnor baserat på 7 recensioner. Har du en fråga om Blade Vortex 150 Pro BNF Basic eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/17
150 Mini Getting Started Guide
International edition
Rev 1.0 - Dec 2016
Every Vortex 150 Mini is flight tested before
leaving the factory.
Flight Tested By:
WARNING
Congratulations on your purchase of one of the hobby’s first ARF pure-bred racing quadcopters. A
product designed by FPV Racers, for FPV Racers.
Do not expect it to fly like a DJI Phantom . It does not have a return-to-home feature, no GPS, and it ™
does not have stabilization features that will allow your little brother to fly.
Take it easy if you are new to the world of FPV racing, try to avoid slamming the quad into the first wall
before you have mastered slaloming through the trees on the way to the wall.
Acro mode is something that should be learned as soon as possible, flying any other mode is a bit like
driving a Lamborghini around a parking-lot in reverse not exactly what you bought the Lambo for. …
Please carefully read the recommendations in this getting started guide, as far as equipment/battery
selection, and how to run the Vortex 150 Mini Wizard.
REMOVE PROPS
Mini-quad props can do serious damage when coming in contact with human skin, risk of deep cuts and
lacerations should be avoided at all cost.
So when you are working on a quad with the battery connected, it is highly recommended to REMOVE
ALL PROPS, unless you are just about to fly. Keep in mind that when setting up mini-quads, there is
always a remote chance that a configuration change can spin up motors unexpectedly.
ImmersionRC accepts no responsibility, or liability, for any injury, or damage, to persons or property, caused
by the use of the Vortex.
INSTALL ANTENNA
The Video Transmitter included in the Vortex may be damaged permanently if run without the supplied
SpiroNET Antenna. Please take care to install this antenna before every flight, and when powering up the
Vortex for even a short time period.
ImmersionRC accepts no responsibility for damage caused to the Vortex by operating without a suitable Tx
antenna installed.
2
4 Steps: Unboxing to Racing
To get your ARF Vortex ready to race, follow the simple 4-step process below.
1) Install Compatible R/C Receiver
2)Install suitable battery
3) Setup the video link
4) Run the wizard
3
Produktspecifikationer
| Varumärke: | Blade |
| Kategori: | Radiostyrda leksaker |
| Modell: | Vortex 150 Pro BNF Basic |
Behöver du hjälp?
Om du behöver hjälp med Blade Vortex 150 Pro BNF Basic ställ en fråga nedan och andra användare kommer att svara dig
Radiostyrda leksaker Blade Manualer
23 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
16 September 2024
Radiostyrda leksaker Manualer
Nyaste Radiostyrda leksaker Manualer
14 Juni 2025
31 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
30 Mars 2025
29 Mars 2025
29 Mars 2025
29 Mars 2025