BlaknBlu Foxtrot Bruksanvisning
Sidor 4 Inte kategoriserad
Läs bruksanvisningen för BlaknBlu Foxtrot gratis online eller ladda ner PDF:en. Bruksanvisningen har visats 27 gånger. Fråga om modellen? Ställ en fråga
of 14
Foxtrot User Manual
Foxtrot has four identical Voltage Controlled Filter channels. Although they can be linked for
some interesting effects, let’s start by looking at a single filter channel.
1. Basic Operation
Each channel has two mono signal inputs. The two inputs are summed together before being
sent to the filter, with the attenuation of each input being set by the corresponding input trim
pot.
There are two cut off frequency CV inputs per VCF channel, each with its own attenuator control.
The CVs are summed to form the CV controlling the VCF. A CV input of 0V or below corresponds
to the lowest cut-off. If you want to use a bipolar signal to modulate the VCFs (for instance, from
an LFO), just turn up the manual cut off frequency knob.
There are two identical outputs from each filter channel, however, selecting Pan as the Aux CV
input turns the two outputs into a stereo pair, with the pan now controlled by Aux CV.
1.1 CUT OFF FREQUENCY CONTROL
Unsurprisingly, the Cut Off Frequency knob controls the static cut off of the filter. Fully
anticlockwise is the lowest frequency (around 20Hz) and fully clockwise is the highest (around
20kHz depending on the filter model).
Foxtrot User Manual
Firmware v2.1
Signal Inputs
Boost/Overdrive
Filter Link
Filter Model
Signal Input Attenuators
Clipping
Dual/Stereo Outputs
Aux CV Select
Aux CV Input Attenuator
Cut-off CV Input Attenuators
Aux CV Input
Cut-off CV Inputs
Foxtrot Filter
Foxtrot Filter
Foxtrot Filter
Foxtrot FilterFoxtrot Filter
Produktspecifikationer
| Varumärke: | BlaknBlu |
| Kategori: | Inte kategoriserad |
| Modell: | Foxtrot |
Behöver du hjälp?
Om du behöver hjälp med BlaknBlu Foxtrot ställ en fråga nedan och andra användare kommer att svara dig