Blaupunkt XLf 200 ATS Bruksanvisning

Blaupunkt Inte kategoriserad XLf 200 ATS

Läs gratis den bruksanvisning för Blaupunkt XLf 200 ATS (5 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 2 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 1.5 recensioner. Har du en fråga om Blaupunkt XLf 200 ATS eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Ladda ner PDF

Sida 1/5

Operating and Installation Instructions

VELOCITY POWER

TESLA PLUG & PLAY

ACTIVE SUBWOOFER

XLf 200 ATS

Remote Control

Disclaimer

•

Recycling and Disposal

Do not dispose of your old unit in the

household trash!

Use the return and collection systems

available to dispose of the old device.

This manual may be updated from time to time without

any notice.

In no event shall Blaupunkt be liable for any direct,

indirect, punitive, incidental, special consequential

damages, to property or life, improper storage,

whatsoever arising out of or connected with the use

or misuse of our products.

USA & CANADA : Product not intended for sale in

the United States and Canada. If purchased in the

U.S. or Canada, this product is purchased as-is. No

warranty, express or implied is provided in the U.S.

and Canada.

Proper system planning is vital in order to maximize the

device’s performance and road safety. Plan your instal-

lation carefully to avoid compromising performance re-

liability of the system. Consult an authorized Blaupunkt

dealer for installation or reparation. Read the manual

carefully before operating the device for the rst time.

Safety Notes

Ensure to follow below safety notes during installation

and wiring connection : -

•

Installation and Connection Instructions

•

Intergrated Fuse

•

Switching On/O

•

Voltage Supply

•

INTRODUCTION

Disconnect the negative terminal of the battery.

Refer to the safety notes of vehicle manufacturer.

Ensure positions of the holes are nowhere near the

vehicle component to avoid any damage during

drilling.

Ensure cross section of the cable is no less than

2.5mm if the positive and negative cables are too

long.

Incorrect installation may result in malfunction of

the device or the car sound system.

Select a dry and well-ventilated location to install

the device.

The device must not be installed on the rear shelf,

rear seats or exposed locations.

The installation location must be suitable for

screw holes and have stable ground support.

The integrated fuse in the device protects the

output voltage and the entire electrical system in

case of malfunction. Do not replace damaged fuse

with higher current.

This device will automatically turn on if audio sig-

nal is detected. The device will also automatically

turn o if audio signal is received.

Use the supplied power extension cable to connect

to the positive battery terminal.

Firmly and carefully connect the ground lead to a

bare metal point on the vehicle chassis.

The control of the device should be a two-channel

control, either via the preamplier output of the

car sound system.

A control solely via the right or left channel is also

possible since the low-frequency portion of the

music is generally identical on both channels.

1. Power Indicator

2. Gain Adjustment

Turn the gain knob to adjust

the volume to the desired

level.

SPECIFICATION

Speaker Size : 8.0”/ 203mm

Impedance : (4+4)ohms

Sensitivity (1W/1m) : 85dB

Cone Composition : Aluminium

Magnet Type : Ferrite

Enclosure Housing Material : Aluminium

Enclosure Dimension (L x W x H) : 277 x 259 x 290mm

Enclosure Net Weight : 3.75kg

290mm259mm

Amplier Technology : Class D

Normal Output Power (RMS) : 200W

Max Output Power : 380W

Signal/Noise Ratio : 110dB

Frequency Response : 30Hz-150Hz

Low Pass Filter (LPF) : 50Hz-100Hz

Voltage : 10-14.4V

Phase Switch : 0 deg /180 deg

Fuse Rating : 20A

THD : <0.4%

Passive Radiator : 203mm

Variable Bass Boost : 0 – 12dB

Thermal Short & Overload Protection

Subwoofer

•

Amplier

•

Accessories

Screws (M6x12) x1

Remote Controller x1 High Level Input Signal Wire x1

Screw Nuts (M6) x2

277mm

(Hz ) (dB)

Produktspecifikationer

Varumärke:	Blaupunkt
Kategori:	Inte kategoriserad
Modell:	XLf 200 ATS
Färg på produkten:	Zwart
Vikt:	200 g
Bredd:	110 mm
Djup:	50 mm
Höjd:	120 mm
Sladdlängd:	2 m
Användarmanual:	Ja
Husmaterial:	Kunststof
Videoformat som stöds:	YUY2, MJPG
Autofokus:	Ja
Monteringsmetod:	Clip/standaard
Betraktningsvinkel, horisontell:	70 °
Zoomkapacitet:	Nee
Maximal bildfrekvens:	30 fps
Upplösning vid inspelningshastighet:	1920x1080@30fps
Ursprungsland:	China
Brännvidd:	100 to infinity mm
Certifiering:	CE, FC
Optisk sensorstorlek:	1/2.7 "
Megapixlar:	2 MP
Bildsensortyp:	CMOS
Inbyggd blixt:	Nee
Gränssnitt:	USB 2.0
Maximal videoupplösning:	1920 x 1080 Pixels
Inbyggd mikrofon:	Ja
vitbalans:	Auto, Manual
3D:	Nee
Hållbarhetscertifikat:	RoHS
Plug and play:	Ja
Stöder Windows:	Ja
Stöder Mac-operativsystem:	Ja
Överensstämmelse med hållbarhet:	Ja
Kamera HD-typ:	Full HD
Strömförsörjning via USB:	Ja
Mikrofonriktningstyp:	Omnidirectioneel
Löstagbar kabel:	Nee
Scherpstellen:	Auto
Sekretesskamera:	Ja
Skriv sekretess:	Privacysluiter
Rörelsesensor:	Nee
Stativ-ingår:	Nee
Ansiktsspårning:	Nee
Automatisk ljuskorrigering:	Ja