Blaze BLZ-KMDO-SDSH Bruksanvisning

Blaze Utegrill BLZ-KMDO-SDSH

Läs gratis den bruksanvisning för Blaze BLZ-KMDO-SDSH (3 sidor) i kategorin Utegrill. Guiden har ansetts hjälpsam av 6 personer och har ett genomsnittsbetyg på 4.4 stjärnor baserat på 3.5 recensioner. Har du en fråga om Blaze BLZ-KMDO-SDSH eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/3
-
Assembly Instructions
KAMADO SIDE SHELF KIT: BLZ- - KMDO SDSH
Your kamado side shelf kit includes two side shelves. Each shelf is identical and can be installed
on either side of the grill. You will need the included metric # 5 + # 6 millimeter allen wrench to
install.
1. Each side shelf has two brackets welded off to the right and left of the shelf itself. These
brackets fasten to the grill body via the installed on the grill four fasteners pre- body just below
the cooking grid surface. Place the openings in the brackets over the fasteners and slide
downward. See images below:
2. Once the shelf brackets are properly positioned over the fasteners, tighten the fasteners with
the included #5 mm allen wrench.
3. Underneath the shelf, you will find a shelf leveling / stabilizing screw. This screw holds tension
against the grill body leveling the shelf and holding it securely in this position. Tighten this screw
either by hand or using the #6 mm allen wrench. When complete, the shelf should be level. See
below:

Produktspecifikationer

Varumärke: Blaze
Kategori: Utegrill
Modell: BLZ-KMDO-SDSH

Behöver du hjälp?

Om du behöver hjälp med Blaze BLZ-KMDO-SDSH ställ en fråga nedan och andra användare kommer att svara dig