Blink Video Doorbell Bruksanvisning

Blink dörrklocka Video Doorbell

Läs gratis den bruksanvisning för Blink Video Doorbell (23 sidor) i kategorin dörrklocka. Guiden har ansetts hjälpsam av 4 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 2.5 recensioner. Har du en fråga om Blink Video Doorbell eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/23
IMPORTANT PRODUCT INFORMATION
SAFETY INFORMATION
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK,
OR OTHER INJURY OR DAMAGE.
Installation by a qualified electrician may be required in your area. Refer to your local laws
and building codes before performing electrical work; permits and/or professional installation
may be required by law.
WARNING
Risk of electric shock. Do not directly connect this device to the electrical main. This device is
intended to be connected to an existing doorbell chime transformer supplying 16-24 volts AC
at 50 or 60 Hz, 40VA max. For setup, mounting and hardwire installation instructions, go to
blink.com/setup. Installation by a qualified electrician may be required in your area. Refer to
your local laws and building codes before performing electrical work; permits and/ or
professional installation may be required by law.
Small parts contained in your Device and its accessories may present a choking hazard to
small children.
Handle your device and its accessories with care. Your device or its accessories may have
pointed edges which can lead to scratches, cuts, or other physical injury.
BATTERY SAFETY
The Lithium batteries accompanying this device cannot be recharged. Do not open,
disassemble, bend, deform, puncture, or shred the battery. Do not modify, attempt to insert
foreign objects into the battery or immerse or expose to water or other liquids. Do not expose
the battery to fire, explosion, high temperature or other hazard. Fires involving lithium
batteries can usually be controlled with flooding with water, except in confined spaces where
a smothering agent should be used.
If dropped and you suspect damage, take steps to prevent any ingestion or direct contact of
fluids and any other materials from the battery with skin or clothes. If a battery leaks, remove
all batteries and recycle or dispose of them in accordance with battery manufacturer's
recommendations. If fluid or other material from the battery comes into contact with skin or
clothes, flush skin or clothes with water immediately. An open battery should never be
exposed to water, as fire or explosion may result from exposure to water.
Insert the batteries in the proper direction as indicated by positive (+) and negative(-)
markings in battery compartment. Always replace with non-rechargeable AA 1.5V Lithium
batteries (lithium metal batteries) specified for this product.
Do not mix used and new batteries or batteries of different types (for example, Lithium and
alkaline batteries). Always remove old, weak, or worn-out batteries promptly and recycle or
dispose of them in accordance with applicable laws and regulations.
Do not expose your device or adaptor to liquids. If your device or adaptor gets wet, carefully
unplug all cables without getting your hands wet and wait for the device and adaptor to dry
completely before plugging them in again. Do not attempt to dry your device or adaptor with
an external heat source, such as a microwave oven or a hair dryer. If the device or adaptor
appear damaged, discontinue use immediately. Use only accessories supplied with the device
to power your device. To avoid risk of electric shock, do not touch your device or any wires
connected to your device during a lightning storm.
Install your power adaptor into an easily accessible socket-outlet located near the equipment
that will be plugged into, or powered by, the adaptor.
When this device is plugged into an electrical socket-outlet, unplugging this device will
disconnect it from the AC mains supply. Only plug this device into an easily accessible socket-
outlet.
Devices with a power cord must be located near the socket-outlet.
If this device is used to power other devices, those powered devices must be located near this
device.
PRODUCT SPECIFICATIONS
Blink Video Doorbell
Model Number: BDM01200U, BDM01200UW
Electrical Rating: Power: Existing chime wiring: 16-24 VAC and 2 AA
1.5V lithium metal (non-rechargeable) batteries Operating temperature range: -20-
45°C Wireless Features: WiFi
Maximum Power: 2412-2472 MHz, 16.79 dBm EIRP Wireless Features: SRO
Maximum Power: 863.2 MHz - 869.4 MHz, 13.41 dBm ERP
PRODUCT SPECIFICATIONS
Blink Sync Module 2
Model Number: BSM01401U
Electrical Rating: Power: 100-220V AC to 5V DC converter included Operating temperature
range: -0-35°C
Wireless Feature: WiFi
Maximum Power: 2412 - 2472 MHz 19.52 dBm EIRP Wireless Feature: SRO
Maximum Power: 863.2 MHz - 869.4 MHz 7.08 dBm ERP
FOR CUSTOMERS IN EUROPE AND THE UNITED KINGDOM
Conformity Statement
Hereby, Amazon.com Services LLC declares that the radio equipment type BDM01200U,
BDM01200UW, BSM01401U is in compliance with Directive 2014/53/EU and UK Radio
Equipment Regulation, RER 2017(S.I. 2017/1206), including currently valid amendment(s).
The full texts of the declarations of conformity and other applicable statements of
compliance for this product are available at the following internet address: blink.com/safety-
and-compliance


Produktspecifikationer

Varumärke: Blink
Kategori: dörrklocka
Modell: Video Doorbell

Behöver du hjälp?

Om du behöver hjälp med Blink Video Doorbell ställ en fråga nedan och andra användare kommer att svara dig