Blue Lantern Gleba Bruksanvisning


Läs gratis den bruksanvisning för Blue Lantern Gleba (2 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 20 personer och har ett genomsnittsbetyg på 4.6 stjärnor baserat på 10.5 recensioner. Har du en fråga om Blue Lantern Gleba eller vill du ställa frågor till andra användare av produkten? Ställ en fråga

Sida 1/2
BLM GLEBA SV 12DB FILTER
Blue color section. Audio mixer, subharmonic generator, and audio direct inputs. This is where you mix
to your liking all the possible audio. The sub harmonic generator is internally patched to input jack AIN 1.
This section has gain when fully clockwise. Lower knob settings work best for a classic tone. Otherwise,
you will get an overdriven tone if you have all the knobs fully clockwise all the time. The Norm label
indicates volume right before being over driven.
Green Section. Core Analog Filter Section. FCV in is where you can achieve 1V per Octave control. FM
input jack and attenuinverter is for envelope patching. The 3 Toggle Switches is where you activate one
of the State Variable Filters. You can use more than one at a time.
Orange Section: REZ knob is used to give resonance to you sound. The filter will self-oscillate when fully
clockwise. There is a small trimmer on the front panel labeled Q. You can adjust the amplitude of the
sine wave using this trimmer. If the sine wave is adjusted to low the Limit toggle switch will have little to
no effect. The Limit Toggle switch is a diode limiter located on the feedback signal patch (resonance).


Produktspecifikationer

Varumärke: Blue Lantern
Kategori: Inte kategoriserad
Modell: Gleba

Behöver du hjälp?

Om du behöver hjälp med Blue Lantern Gleba ställ en fråga nedan och andra användare kommer att svara dig