Bluetti Elite 200 V2 Bruksanvisning
Bluetti
Inte kategoriserad
Elite 200 V2
Läs gratis den bruksanvisning för Bluetti Elite 200 V2 (32 sidor) i kategorin Inte kategoriserad. Guiden har ansetts hjälpsam av 22 personer och har ett genomsnittsbetyg på 4.7 stjärnor baserat på 11.5 recensioner. Har du en fråga om Bluetti Elite 200 V2 eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/32

Elite 200 V2
Portable Power Station
User Manual V2.0
Important Instructions
For the best experience and performance,
fully charge your unit and update to the latest firmware
before first use. See the appendix "Update Firmware via
BLUETTI App" for guidance.
Read and understand this manual before use and keep
it handy for future reference.

Tips
1. Charge the unit before first use.
2. Do not use solar panels with open circuit voltage higher than 60V. Solar input
voltage range for the unit is 12V-60V.
3. If the unit's SoC falls below 5%, please recharge the unit in time. If the SoC drops to 0,
power off the unit and charge it for at least 30 minutes before restarting.
4. The unit is for off-grid use only. Do not connect its AC output to the grid.
5. If not used for more than 3 months, charge the unit to 40%-60% SoC and store it
with the power off. For optimum battery life, discharge and charge the unit every 3
months.

Legal Information
Copyright © ShenzhenPowerOakNewenerCo., Ltd. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any
means without the prior written consent of ShenzhenPowerOakNewenerCo., Ltd.
Shenzhen PowerOak Newener Co., Ltd.
F19, BLD No.1, Kaidaer, Tongsha RD No.168, Xili street, Nanshan, Shenzhen, China
Website: https://www.bluettipower.com/
Notice
BLUETTI's products and services are subject to the terms and conditions agreed upon
during purchase. Some aspects described in this manual may not be available under
your purchase contract. Unless otherwise specified in the contract, BLUETTI makes no
express or implied representations or warranties regarding the contents of this manual.
The contents of this manual are subject to change without notice. Please obtain the
latest version from BLUETTI official website.
If you have any questions or concerns about this manual, please contact BLUETTI
support for further assistance.
Produktspecifikationer
Varumärke: | Bluetti |
Kategori: | Inte kategoriserad |
Modell: | Elite 200 V2 |
Färg på produkten: | Zwart |
Vikt: | 635 g |
Blåtand: | Nee |
Typ av strömkälla: | AC |
Inkluderar AC-adapter: | Ja |
Genomsnittlig effekt: | 3 W |
Volymkontroll: | Digitaal |
Certifiering: | UL/cUL |
FM-radio: | Nee |
Anslutning för nätadapter: | Ja |
Equalizerinställningar: | Nee |
Impedans: | 4 Ohm |
Ljudutgångskanaler: | 2.0 kanalen |
Diameter drivrutin: | 1.5 mm |
Frekvensomfång: | - Hz |
AUX ingång: | Ja |
Mått (B x D x H): | 133.3 x 146 x 50.8 mm |
Apple dockningskompatibilitet: | iPad |
Toppeffekt: | 6 W |
Behöver du hjälp?
Om du behöver hjälp med Bluetti Elite 200 V2 ställ en fråga nedan och andra användare kommer att svara dig
Inte kategoriserad Bluetti Manualer
3 Januari 2025
3 Januari 2025
3 Januari 2025
10 December 2024
10 December 2024
10 December 2024
10 December 2024
10 December 2024
10 December 2024
10 December 2024
Inte kategoriserad Manualer
- Doepke
- WestBend
- Cata
- Mitsubishi
- Pippi
- Leba
- Etymotic
- Foliatec
- Plastkon
- Cisco
- Uniropa
- Kogan
- Power Craft
- Uniprodo
- Audio Pro
Nyaste Inte kategoriserad Manualer
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025
9 April 2025