Blustream HMXL44ARC-KIT Bruksanvisning
Läs gratis den bruksanvisning för Blustream HMXL44ARC-KIT (27 sidor) i kategorin Växla. Guiden har ansetts hjälpsam av 19 personer och har ett genomsnittsbetyg på 5.0 stjärnor baserat på 10 recensioner. Har du en fråga om Blustream HMXL44ARC-KIT eller vill du ställa frågor till andra användare av produkten? Ställ en fråga
Sida 1/27
HMXL44ARC-KIT
User Manual
REVA1_HMXL44ARC-KIT_User_Manual
L/ROPTICAL
AUDIO INPUT
HMXL44ARC
AUDIO OUTPUT
1 1
IR INPUT
2 23 34 4GLOBAL GLOBAL
IR OUTPUT RS-232 CONTROL
INPUT
HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 1 HDBT 1 HDBT 2 HDBT 3 HDBT 4
OUTPUT
UPGRADE
OPTICAL 4OPTICAL 3OPTICAL 2OPTICAL 1 L/R 4L/R 3L/R 2L/R 1
2 3 4 IR CTRL TCP/IP RS-232 EDID1
RXTX RXTX RXT X RXTX RXTX
4x4 4K HDBaseT ARC Matrix
Supporting 4K 60Hz 4:4:4
HMXL44ARC-KIT USER MANUAL
www.blustream.com.au | | www.blustream-us.com www.blustream.co.uk02
Surge Protection Device
Recommended
This product contains sensitive
electrical components that may be
damaged by electrical spikes, surges,
electric shock, lightning strikes, etc.
Use of surge protection systems is
highly recommended in order to
protect and extend the life of your
equipment.
Contents
Thank you for purchasing
this product.
For optimum performance and safety,
please read these instructions care-
fully before connecting, operating or
adjusting this product. Please keep this
manual for future reference.
Introduction 03
Features 03
Front Panel Description 04
Rear Panel Description 04
EDID Management 05
Front Panel Menu System 06
HDBaseT™ Receiver Compatibility 06
Power Over Cable 06
Terminating CAT Cables for use with HDBT 07
Understanding the HDBaseT™ Status LED’s 07
Infrared (IR) Control 08
CEC Control 08
Audio Return Channel 08
Web GUI Control 08-16
Remote Control Description 17
IR Commands 17-18
Specifications 19
Package Contents 19
Maintenance 19
RS-232 Config & Telnet Commands 20-22
Web-GUI Firmware Update 23-24
Schematic 25
Certifications 26
HMXL44ARC-KIT USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk 03
Our Essential 4x4 HDBaseT™ Matrix oers unprecedented performance and value for the
custom installation market. The HMXL44ARC is a HDMI2.0 4K60Hz 4:4:4 HDCP2.2 Matrix
package utilising CSC technology to deliver HDMI, Bi-directional IR and PoC up to lengths
of 70m (at 1080p) over a single CAT cable.
The Matrix also provides advanced features including simultaneous HDBaseT™/HDMI on
output 1, video Smart Scaling on HDBaseT outputs and independent 14x4 audio matrix
including Audio Return Channel (ARC). The HMXL44ARC includes in-built web browser
interface module for control and configuration of the Matrix and RS-232 and IR pass
through to enable seamless 3rd party control integration.
Introduction
FEATURES:
• Advanced HDBaseT™ technology oering distribution of video and audio over a single CAT cable
• Advanced Colour Space Conversion (CSC) supports HDMI 2.0 18Gbps specification including HDR*
• Features 4 x HDMI inputs which can be independently routed to 4 x HDBaseT™ outputs
• Output 1 features simultaneous HDMI and HDBaseT™ output
• Video down-conversion on HDBaseT™ outputs allowing a display only capable of supporting lower video resolutions (4K 60Hz
4:2:0, or 1080p) to receive 4K 60Hz 4:4:4 video content, while still showing maximum original 4K UHD resolution on remaining
video outputs
• Supports 4K 60Hz 4:4:4 UHD video up to 40m, and 1080p video up to 70m
• 14x4 Audio Matrix independently controllable from video. Audio source inputs include:
- 4 x audio breakout from HDMI source inputs
- 4 x audio breakout from zone outputs
- 4 x ARC from zone outputs*
- 1 x Optical and 1 x analogue audio input
• Supports all known HDMI audio formats including Dolby TrueHD, Dolby Atmos, Dolby Digital Plus and DTS-HD Master Audio
transmission
• Web interface module for control and configuration of Matrix
• Supports bi-directional IR and RS-232 on all HDBaseT™ outputs
• Control via front panel, IR, iOS / Android App, RS-232 and TCP/IP
• Supports PoC (Power over Cable) to power supplied RX70CS HDBaseT™ receivers
• Supplied with Blustream IR receivers and emitters
• Advanced EDID management and HDCP 2.2 compliant
* ARC feature supports HDMI ARC or Optical ARC
* CSC & ARC feature compatible with RX70CS only
HMXL44ARC-KIT USER MANUAL
www.blustream.com.au | | www.blustream-us.com www.blustream.co.uk04
L/ROPTICAL
AUDIO IN PUT
HMXL44ARC
AUDIO OUT PUT
1 1
IR IN PUT
2 23 34 4GLOBAL GLOBAL
IR OUT PUT RS-232 CONT ROL
INPUT
HDMI 1 HDMI 2 HDMI 3 HDMI 4 HD MI 1 HDBT 1 HDBT 2 HDBT 3 HDBT 4
OUTPUT
UPGRADE
OPTICAL 4OPTI CAL 3OPTICAL 2OPTI CAL 1 L/R 4L/R 3L/R 2L/R 1
2 3 4 IR CT RL TCP/IP RS-232 EDID1
RXTX R XTX R XTX RXTX RXTX
4x4 4K HDBaseT ARC Matrix
Supporting 4K 60Hz 4:4:4
Front Panel Description
Rear Panel Description
1
5 6 7
2
1 IR Receiver Window
2 LCD Display – Shows the status of input
/output selection, EDID etc...
3 Menu Button - Press to access Matrix
menu system allowing you to configure
EDID settings, PoC settings, network
config and firmware information
4 Power Button – Press and hold for 3
seconds to power on / o the Matrix
5 Selection Buttons - Multi-use buttons
Primary Use:
First press = HDMI output selection -
Press to select output/s from 1 to 4.
Output(s) selected will be displayed
on the Matrix display. Multiple outputs
can be chosen. Then wait 3 seconds
or press ‘SELECT’ to move to input
selection.
Second Press = HDMI input selection -
Press to select the input from 1 - 4. The
Input selected will be displayed on the
Matrix display. Press the Select button
to confirm switch
6 Select Button – Press to confirm
changes within the Matrix menu
7 ESC - Press to exit MENU mode
Secondary Use:
When the MENU button has been
pressed buttons 1, 2, 3 & 4 are used as
cursors to navigate the MENU system
1 = Le
2 = Up
3 = Right
4 = Down
3 4
5
8
6
1 IR Outputs - 3.5mm mono connector
to connect to Blustream IR emitter. 5V
Used for local source control
2 IR Inputs - 3.5mm stereo connector to
connect to Blustream 5V IR receiver or
Control Processor. Used to extend IR
from Matrix to HDBaseT™ Outputs 1-4
3 Bi-directional RS-232 ports. Connect to
third party control device to extend RS-
232 commands to HDBaseT RX70CS ™
receivers RS-232 port
4 IR Control Input - 3.5mm stereo
connector to connect to Blustream IR
receiver for IR control of the Matrix
5 TCP/IP - RJ45 connector for TCP/IP and
Web GUI control of the Matrix
6 RS-232 - Phoenix connector for RS-232
control of the Matrix
7 EDID DIP switch – Used for global EDID
settings
8 HDMI Inputs - Connect to source
devices
9 HDMI Output - Connect to display
device (simultaneous with HDBT
output 1)
q HDBaseT™ Outputs - RJ45 HDBaseT™
port to connect to the HDBaseT™ input
port of the supplied Blustream RX70CS
HDBaseT™ receiver
w Optical (Toslink) Audio Input - Connect
to source device for audio distribution
within the HMXL44ARC independent
audio matrix
e 3.5mm Analogue Audio Input - L/R
stereo jack. Connect to source device
for audio distribution within the
HMXL44ARC independent audio Matrix
r Optical and Analogue Audio Outputs -
independent audio matrix with 4 x dual
outputs (Toslink + 3.5mm L/R line level
stereo jack). For connection to 3rd
party audio devices. Analogue NOTE:
audio outputs support 2ch PCM only
t IEC Power Socket - Use supplied IEC
power cable
y Power Switch
14 15
1 2 3 4
9 11
7
10 12 13
HMXL44ARC-KIT USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk 05
EDID (Extended Display Identification Data) is a data structure that is used between a display and a source. This data
is used by the source to find out what audio and video resolutions are supported by the display. By pre-determining
the video resolution and audio format of the source and display device you can reduce the time needed for EDID hand
shaking thus making switching quicker and more reliable.
Configuration of Matrix EDID settings can be acheived in one of four ways:
1 Using Matrix web browser interface (see section on Web GUI Control)
2 Using Matrix Front Panel (see below)
3 Using API commands via RS-232 or Telnet (see below)
4 Using Matrix EDID dipswitches (see below)
To configure the EDID via Matrix Front Panel:
a. Press the MENU button
b. Scroll down to ‘EDID Management’. Press the SELECT button to enter into EDID configuration mode
c. Scroll through EDID management options and select ‘Built-In EDID’ or ‘Copy Output xx’
d. Select the input you wish to fix the EDID on (1-4) or select ‘All’. Use UP/DOWN buttons to toggle the selection and press
the SELECT button to move to EDID selection
e. Select video resolution and audio format required (4K, 1080p, 3D, 2ch, 5.1 etc). Use UP/DOWN buttons to toggle the
selection and press the SELECT button to apply. The SELECT button LED will flash orange when complete
Copy Output EDID:
f. Select the HDBaseT™ output you wish to copy the EDID from. Use UP/DOWN buttons to toggle the selection and press
the SELECT button to move to the input selection that you wish to copy the EDID to
g. Select the HDMI input (1-4) or select ‘All’ to copy to all HDMI inputs. Press the SELECT button to apply
To configure the EDID via RS-232/Telnet API:
Configuration of the EDID settings for each input can be achieved
using the following API commands to specify the required EDID.
Please see the section on RS-232 and Telnet API at the end of this
manual for connectivity information:
EDID xx DF zz Set Input xx EDID To Default EDID zz
xx = Input On Product (00 Refers To ALL Inputs, 02 = Input 2 Etc)
zz = 00 : HDMI 1080p@60Hz, Audio 2CH PCM (Default)
01 : HDMI 1080p@60Hz, Audio 5.1CH DTS/DOLBY
02 : HDMI 1080p@60Hz, Audio 7.1CH DTS/DOLBY/HD
03 : HDMI 1080i@60Hz, Audio 2CH PCM
04 : HDMI 1080i@60Hz, Audio 5.1CH DTS/DOLBY
05 : HDMI 1080i@60Hz, Audio 7.1CH DTS/DOLBY/HD
06 : HDMI 1080p@60Hz/3D, Audio 2CH PCM
07 : HDMI 1080p@60Hz/3D, Audio 5.1CH DTS/DOLBY
08 : HDMI 1080p@60Hz/3D, Audio 7.1CH DTS/DOLBY/HD
09 : HDMI 4K@30Hz 4:4:4, Audio 2CH PCM
10 : HDMI 4K@30Hz 4:4:4, vAudio 5.1CH DTS/DOLBY
11 : HDMI 4K@30Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD
12 : HDMI 4K@60Hz 4:2:0/4K@30Hz 4:4:4, Audio 2CH PCM
13 : HDMI 4K@60Hz 4:2:0/4K@30Hz 4:4:4, Audio 5.1CH DTS/DOLBY
14 : HDMI 4K@60Hz 4:2:0/4K@30Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD
15 : HDMI 4K@60Hz 4:4:4, Audio 2CH PCM
16 : HDMI 4K@60Hz 4:4:4, Audio 5.1CH DTS/DOLBY
17 : HDMI 4K@60Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD
18 : DVI 1280x1024@60Hz, Audio None
19 : DVI 1920x1080@60Hz, Audio None
20 : DVI 1920x1200@60Hz, Audio None
21 : HDMI 1920x1200@60Hz, Audio 2CH PCM/6CH PCM
22 : User EDID 1
23 : User EDID 2
EDID Control
3 2 1 0 EDID Type
Combination of DIP positions
0 0 0 0 1080p 60Hz 2.0ch
0 0 0 1 1080p 60Hz 5.1ch
0 0 1 0 1080p 60Hz 7.1ch
0 0 1 1 1080i 60Hz 2.0ch
0 1 0 0 1080i 60Hz 5.1ch
0 1 0 1 1080i 60Hz 7.1ch
0 1 1 0 4K 60Hz 4:2:0 2.0ch
0 1 1 1 4K 60Hz 4:2:0 5.1ch
1 0 0 0 4K 60Hz 4:2:0 7.1ch
1 0 0 1 4K 60Hz 4:4:4 2.0ch
1 0 1 0 4K 60Hz 4:4:4 5.1ch
1 0 1 1 4K 60Hz 4:4:4 7.1ch
1 1 0 0 DVI 1280x1024@60Hz
1 1 0 1 DVI 1920x1080@60Hz
1 1 1 0 DVI 1920x1200@60Hz
1 1 1 1 Soware EDID
To configure the EDID via DIP Switch:
To configure the global EDID for all inputs via the DIP
switch, use the settings below. Note this will override and
disallow any EDID settings configured via the web GUI.
HMXL44ARC-KIT USER MANUAL
www.blustream.com.au | | www.blustream-us.com www.blustream.co.uk06
The front panel of the Matrix features a menu system to provide quick configuration of key features of the matrix.
Press the menu button ( ) to bring up the menu system of the matrix on the front panel display. While the menu
system is active, the arrow keys (<, >, ^, v) to navigate through, and use select (√) or cancel (x) buttons to change
settings.
The menu system allows configuration of the following items:
1 EDID Settings - Select an
2 POC Settings
3 Network Config
4 F/W Version
Front Panel Menu System
This matrix is compatible with all Blusream HDBaseT™ receivers however support of specific features will vary.
The Blustream RX70CS HDBaseT™ receivers are supplied with this Matrix as these fully supports the following key
features:
• CSC - Colour Space Conversion, the method utilised to support 18Gbps signals being transmitted over HDBaseT™
• ARC - Audio Return Channel, to output the displays Audio Return Channel from the optical outputs of the Matrix
• PoC - Power Over Cable, to power the HDBaseT™ receiver from the Matrix over CAT cable without any additional
power supplies required
HDBaseT™ Receiver Compatibility
Please note: PoC (Power over Cable) is enabled on this product by default - if using another Blustream HDBaseT™
receiver, please disable PoC prior to connection to eliminate the risk of damaging incompatible HDBaseT™ receiver
products. Please check your HDBaseT™ receiver supports 24V PoC before enabling PoC on this product.
There are 3 ways to enable/disable PoC on this matrix:
1 Using Matrix web browser interface (see section on web-GUI operation)
2 Using Matrix Front Panel Meny System (see secion above)
3 Using API commands via Telnet / RS-232 (see Telnet API section at the end of this manual)
Power Over Cable
HMXL44ARC-KIT USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk 07
Terminating CAT Cable for use with HDBaseT™
It is important that the interconnecting CAT cable between Blustream HDBaseT™ products is terminated using the
correct RJ45 pin configuration. The link CAT cable MUST be a ‘straight’ (pin-to-pin) CAT cable, and it is advised that this
is wired to the T568B wiring standard as this format is less prone to EMI (Electro-Magnetic Interference).
When installing CAT cables it is advised that you use the best possible CAT cable quality. HDMI distribution products
will only work if used with CAT5e standard cable or above. Blustream recommends using a CAT6 cable (or better) for
installations, especially when running longer distances, in areas of high EMI, or for 4K signal distribution. It is advised
that using any method of patch panel, wall plate, or join within the CAT cable is avoided as these can add degradation
to the signal. Blustream also recommend using RJ45 connectors that are recommended for use with the choice of CAT
cable.
RJ45 Wiring -
T568B
Understanding the HDBaseT™ Status LED’s
The matrix includes status LED indicators on the HDBaseT™ RJ45 ports to show all connections are active, and to help
diagnose potential connectivity issues.
Understanding the Status Lights - HMXL44ARC:
• The yellow HDBaseT™ status link light will be OFF when there is no HDBaseT™ link established with a Blustream
HDBaseT™ receiver
• The yellow HDBaseT™ status link light will be ON when there is a HDBaseT™ link established with a Blusream
HDBaseT™ receiver
• The green HDBaseT™ link light will be OFF when there is no video signal being transmitted between the matrix and
Blustream HDBaseT™ receiver
• The green HDBaseT™ link light will be ON when a there is a HDCP enabled video signal being transmitted between
the matrix and Blustream HDBaseT™ receiver
• The green HDBaseT™ link light will BLINK when there is a video signal with no HDCP being transmitted between the
matrix and HDBaseT™ receiver
The link lights will only serve as an indication to the connectivity between matrix and HDBaseT™ receiver unit.
The LED’s will not indicate a termination, bandwidth, interference or cable length issues on a CAT cable run. Blustream
always recommend qualifying / verifying / certifying a CAT cable run for suitability prior to the installation of HDBaseT™
equipment.
HMXL44ARC-KIT USER MANUAL
www.blustream.com.au | | www.blustream-us.com www.blustream.co.uk08
This following pages take you through the operation of this Matrix’s Web-GUI. You must connect the TCP/IP RJ45 socket
to your local network in order to access the products Web-GUI.
By default the matrix is set to DHCP, however if a DHCP server (eg: network router) is not installed the matrix IP address
will revert to below details:
Default IP Address is: Default Username is: Default Password is:
192.168.0.200 blustream 1234
The Web-GUI supports multiple users along with multiple user permissions as follows:
Guest Account - This account does not require a user to login. The Guest account can only change sources for each
zone. Guest access can be changed by the Admin, limiting inputs or outputs as necessary.
User Accounts - 7x User accounts can be utilised, each with individual login details. User accounts can be assigned
permissions to specific areas and functions. A User must log in to make use of these functions.
Admin Account - This account allows full access to all functions of the Matrix as well as assigning users with
permissions.
Web-GUI Control
The Blustream range of matrix products include Matrix control via IR.
IMPORTANT: Blustream Infrared products are all 5V and NOT compatible with alternative manufacturers
Infrared solutions. When using third party 12V IR control solutions please use the Blustream IRCAB cable for IR
conversion.
IR Receiver - IRR
Blustream 5V IR receiver to receive
an IR signal for control of the matrix.
IR Control Cable - IRCAB
Blustream IR Control cable 3.5mm Mono to
3.5mm Stereo for linking third party control
solutions to Blustream products.
Compatible with 12V IR 3 party products.
Please Note: cable is directional as
indicated.
IR Receiver - Stereo 3.5mm
Infrared (IR) Control
Signal
5V
Ground
This Matrix allows audio from your supported displays Audio Return Channel (ARC) to be sent back to the matrix via
the RX70CS HDBaseT™ receiver either via HDMI ARC or Optical Audio Return. This can be configured on the Audio page
within the web-GUI of the Matrix. See page 9 for further details.
Audio Return Channel
The Marix features CEC control of source devices and displays via the products web GUI and RS-232. It is possible to
send CEC commands such as power on / o, input selection as well as volume volume up or down. Please see the Web
GUI CEC Control page or RS-232 command list in this document for more information and a full list of CEC commands.
Please note: CEC is subject to the support of standardised codes for the sources and displays connected to the Matrix.
CEC Control
HMXL44ARC-KIT USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk 09
Login Page
The Login Page allows a user or admin to login and access additional functionality.
This page also shows you the current firmware version of both the matrix and web GUI.
Guest Control Page
The Guest Control Page allows a guest to change inputs for each zone without needing to be logged into the matrix.
Simply select the square that corresponds with the input and zone you wish to change.
There is also a power button on the lower right corner to turn the Matrix on or o.
HMXL44ARC-KIT USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk 11
Configuration IR Select Page
The Configuration IR Select Page allows you to change the IR routing of the matrix. Simply select the square that
corresponds with the input and zone output you wish to set up a bi-directional IR relationship with, to have IR route
only between that input to output.
By enabling the ‘IR Follow Video Switching’ setting, IR will no longer have a fixed route. IR from zones will be
transmitted to the input corresponding with whichever video input is slected. IR inputs will be transmitted to whatever
outputs zones are currently viewing ths input source.
Configuration Video Input Page
The Configuration Video Input Page allows users to change settings specific to the inputs of the matrix.
You can adjust the name of each input, the EDID of each input as well as enable or disable CEC to the input.
HMXL44ARC-KIT USER MANUAL
www.blustream.com.au | | www.blustream-us.com www.blustream.co.uk12
Configuration Video Output Page
The Configuration Video Output Page allows you to change settings specific to the outputs of the matrix as follows:
• The name of each output
• Enable or disable CEC to the output
• Enable or disable HDMI Auto Downscale - this will enable/disable automatic conversion from 4K 60Hz 4:4:4 to
4K 60Hz 4:2:0 for displays that do not support 18Gbps HDMI signals. Downscaling will depend on resolutions
supported by the display device
• Enable or disable PoC (Power over Cable) to power connected HDBT receiver. It is recommended to use the
supplied Blustream RX70CS HDBT Receivers to support all features of this Matrix
• Enable or disable IR being transmitted out to a zone or from that zone output
• Set EDID Priority (output 1) where you can specific if the HDBT output or HDMI output should have priority for EDID
management
Configuration Audio Naming Page
The Configuration Audio Naming page allows you to rename all audio inputs and outputs to human readible names,
such as the name of your source device, or the name of the zone output (eg: Kitchen, Bedroom, etc...)
HMXL44ARC-KIT USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk 13
CEC Page - Output
On the CEC Output Page, you must specify a specific output to send the CEC command out of. Press the icon of the
command you wish to send and it will be transmitted to the display device connected to the specified output.
Note CEC is subject to the support of the sources and displays connected to the matrix.
CEC Page - Input
The CEC Page allows you to send pre-defined CEC commands to Inputs or Outputs of the matrix. You can choose
between Input, Output and User-defined sections at the top of the page. On the CEC Input Page, you must specify an
input to send the CEC command to. Press the icon of the command you wish to send at it will be transmitted to the
source device connected to the specified input via HDMI.
Note CEC is subject to the support of the sources and displays connected to the matrix.
HMXL44ARC-KIT USER MANUAL
www.blustream.com.au | | www.blustream-us.com www.blustream.co.uk14
CEC Page - User-defined
The CEC User-defined Page allows you to send custom CEC commands to any Output in the matrix.
You can select an output and then enter the custom CEC command to send the desired function to the output display.
Note CEC is subject to the support of the sources and displays connected to the matrix.
RS-232 Page - Local
The RS-232 Page allows you to send commands either out of the local RS-232 port on the matrix itself, or via HDBT and
out of a compatible HDBT Receiver connected to a display. If the Local radio box is selected, RS-232 commands will be
sent out of the DB9 serial port at the rear of the matrix to a connected device. Baud rate and terminator command as
well as HEX or ASCII can be selected.
Sending an RS-232 command out via the Matrix can be useful in assisting with debugging and fault finding an RS-232
device connected to the matrix.
HMXL44ARC-KIT USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk 15
RS-232 Page - HDBT
The RS-232 HDBT Page allows you to remotely control devices connected via DB9 serial to the remote HDBT Receiver.
It is then possible to automate the display on, input select and display o process via RS-232 for each HDBT output,
when the Matrix is turned on or o.
If RS-232 On is enabled, the User Commands 1, 2, 3, 4, and 5 are all sent out of the HDBT Receiver, when the Matrix is
turned on.
If RS-232 O is enabled, the User O Command will be sent out of the corresponding HDBT Receiver, when the Matrix is
turned o.
You can also specify the Baud Rate and Command Ending (eg: new line, carriage return) to the match the RS-232
device connected to the HDBT Receiver.
Network Page
The Network Page allows you to specify the TCP/IP network port settings. You can choose from Static IP or DHCP, as
well as specify a fixed IP Address, Subnet Mask and Gateway. It is also possible to change or disable the Telnet port.
HMXL44ARC-KIT USER MANUAL
www.blustream.com.au | | www.blustream-us.com www.blustream.co.uk16
Upgrade Page
The Upgrade Page will show you the current firmware version of the matrix, including the Web GUI version and the
MCU firmware version. It also allows you to upgrade the firmware of both the Matrix MCU as well as the Receiver units
connected to the matrix. Simply select whether you are updating the Matrix MCU or a Receiver connected to the unit,
browse for the firmware update file, and press Submit. If you have selected to update a Receiver, you will see a pop up
window asking you to select a specific Receiver or all Receivers to update.
Admin Page
The Admin Page allows the admin to configure up to 8 users including a guest user. Each user can adjust their
password via this page as well.
The Admin, or Users who have been given Admin permissions, are able to allocate permissions to Users. These
permissions include allowing or disallowing access to each page in the Web GUI, as well as allowing or disallowing
access to each input or output in the Matrix.
The Admin Page also allows you to lock or unlock the Front Panel Buttons or Front Panel IR of the matrix as well as
Factory Reset the Matrix.
Please note:
To enable a User and create password for a user account, complete all 4 text fields under the User section:
Name, Current Password, New Password and Confirm New Password.
For all users, the default password is the same as their name (all lower case).
For example: User1 password is user1, User2 password is user2, etc...
To change user2 password to 12345, complete the following steps:
1. Ensure that the User Authorisation button is set to On for User 2
2. Select the User 2 radio button
3. Enter Name as User2 (or the user’s name)
4. Enter Current Password as user2
5. Enter New password and Confirm New Password as 12345
6. Select the ‘Save’ button at the bottom
HMXL44ARC-KIT USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk 17
IR Commands NEC Customer Code = 1898
Advanced matrix features are not available via IR commands
COMMAND NEC HEX
POWER 14
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 003F
0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 003F 0016 0016 0016 003F
0016 003F 0016 003F 0016 0689
OUTPUT 1 09
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016
0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 003F 0016 003F
0016 003F 0016 003F 0016 0689
OUTPUT 2 1D
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 003F
0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 003F
0016 003F 0016 003F 0016 0689
OUTPUT 3 1F
0AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016
0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016
0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016
0689
OUTPUT 4 0D
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 003F
0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F
0016 003F 0016 003F 0016 0689
OUTPUT
ALL 17
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 003F 0016 003F
0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F
0016 003F 0016 003F 0016 0689
OUTPUT
PTP 12
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016
0016 0016 0016 003F 0016 0016 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 003F 0016 0016 0016 003F
0016 003F 0016 003F 0016 0689
INPUT 1 50
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016
0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 003F 0016 003F 0016 003F 0016 003F 0016 0016 0016 003F
0016 0016 0016 003F 0016 0689
INPUT 2 55
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 003F
0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 003F
0016 0016 0016 003F 0016 0689
Remote Control Description
OUTPUT AND INPUT SELECTION
A Select the zone Output you wish to change the source on (Numbers 1-4 correspond
to the zone outputs 1-4, or All corresponds with all outputs).
Pressing the PTP button will mirror all inputs and outputs (Example - Input 1 to
output 1, input 2 to output 2 etc).
B Select the source Input you wish to change the selected zone to (numbers 1-4
correspond to the source inputs 1-4 or All corresponds with all inputs)
C You can adjust the volume or mute each of the outputs by pressing the
desired output button first, and then pressing the Vol +, Vol - or Mute button.
C
A
B
HMXL44ARC-KIT USER MANUAL
www.blustream.com.au | | www.blustream-us.com www.blustream.co.uk18
COMMAND NEC HEX
INPUT 3 48
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 0016 0016 0016
0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 003F 0016 003F 0016 0016 0016 003F 0016 003F
0016 0016 0016 003F 0016 0689
INPUT 4 4A
0000 006D 0000 0022 0157 00AC 0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 003F 0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016
0016 003F 0016 0016 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 003F 0016 0016 0016 003F 0016 003F
0016 0016 0016 003F 0016 0689
INPUT
DOWN 07
0000 006C 0000 0022 015B 00AD 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041
0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041
0016 0041 0016 0041 0016 0679
INPUT UP 40
0000 006C 0000 0022 015B 00AD 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041 0016 0041
0016 0016 0016 0041 0016 0679
VOL- DB
0000 006C 0000 0022 015B 00AD 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 0016
0016 0041 0016 0041 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0041
0016 0016 0016 0016 0016 0679
VOL+ DC
0000 006C 0000 0022 015B 00AD 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0041
0016 0041 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0041
0016 0016 0016 0016 0016 0679
MUTE DD
0000 006C 0000 0022 015B 00AD 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016
0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0041
0016 0041 0016 0041 0016 0016 0016 0041 0016 0041 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0041
0016 0016 0016 0016 0016 0679
IR Commands
HMXL44ARC-KIT USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk 19
Package Contents
Specifications
• 1 x HMXL44ARC
• 4 x RX70CS HDBaseT™ Receivers
• 1 x Rack Mounting Kit
• 1 x Remote Control
• 4 x IR Emitters
• 5 x IR Receivers
• 1 x Serial Cable - DB9 to 3-pin phoenix Connector
• 1 x IR Control Cable - 3.5mm to 3.5mm
• 1 x Quick Reference Guide
• IEC Power Cable(s)
NOTE: Specifications are subject to change without notice. Weights and dimensions are approximate.
• Video Input Connectors: 4 x HDMI Type A, 19-pin, female
• Video Output Connectors: 1 x HDMI Type A, 19-pin, female, 4 x
HDBaseT™ RJ45 connectors
• Audio Input Connectors: 1 x Analogue audio L/R (3.5mm stereo
Jack), 1 x Optical (S/PDIF)
• Audio Output Connectors: 4 x Analogue audio L/R (3.5mm
stereo Jack), 4 x Optical (S/PDIF)
• RS-232 Serial Port: 5 x 3-pin phoenix connector
• IR Input Ports: 5 x 3.5mm stereo jack
• IR Output Ports: 5 x 3.5mm mono jack
• Rack Mountable: 1U rack height, rack ears included
• Casing Dimensions (W x H x D): 436mm x 44mm x 300mm
(without feet)
• Operating Temperature: 32°F to 104°F (-5°C to +55°C)
• Storage Temperature: -4°F to 140°F (-25°C to +70°C)
• Power Supply: Internal 100-240V AC
Maintenance
Clean this unit with a so, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit.
HMXL44ARC-KIT USER MANUAL
www.blustream.com.au | | www.blustream-us.com www.blustream.co.uk20
RS-232 Configuration and Telnet Commands
The Blustream matrix can be controlled via serial and TCP/IP.
The RS-232 port is used for configuration and control of the product, as well as pass through of RS-232 commands to a
compatible Blustream HDBaseT™ receiver.
The default RS-232 communication settings are:
Baud rate: 57600
8
Data bit:
1 Stop bit:
Parity bit: none
The following pages list all available serial commands.
Commonly used Serial Commands
There are several commands that are commonly used for control and testing:
STATUS Status will give feedback on matrix such as zones on, type of connection etc...
PON Power on
POFF Power o
OUTxxON (xx is the zone number you wish to turn on)
Example:- OUT01ON (This would turn output one back on)
OUTxxFRyy (xx is the zone out, yy is the input)
Example:- OUT01FR04 (This would switch output 1 to source input 4)
Common Mistakes
• Carriage return – Some programs do not require the carriage return where as other will not work unless sent
directly aer the string. In the case of some Terminal soware the token <CR> is used to execute a carriage return.
Depending on the program you are using this token maybe dierent. Some other examples that other control systems
deploy include \r or 0D (in hex)
• Spaces – Blustream commands do not require space between commands unless specified. There may be some
programs that require spacing in order to work.
- How the string should look is as follows OUT01ON
- How the string may look if spaces are required: OUT{Space}01{Space}ON
• Baud rate or other serial protocol settings not correct
Produktspecifikationer
| Varumärke: | Blustream |
| Kategori: | Växla |
| Modell: | HMXL44ARC-KIT |
Behöver du hjälp?
Om du behöver hjälp med Blustream HMXL44ARC-KIT ställ en fråga nedan och andra användare kommer att svara dig
Växla Blustream Manualer
24 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
17 September 2024
Växla Manualer
- Edimax
- IPGARD
- IOGEAR
- Cotech
- Setti+
- Maclean Energy
- Victron Energy
- Delta Dore
- Raritan
- HELGI
- Wentronic
- Chacon
- Kramer
- Grandstream
- Audac
Nyaste Växla Manualer
9 April 2025
9 April 2025
7 April 2025
5 April 2025
5 April 2025
5 April 2025
5 April 2025
3 April 2025
3 April 2025
2 April 2025